Оценок - 3, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Furthermore, you cannot apply Picture Style files with an image; however if such a file is registered in the camera and the image is shot, the image will display correctly. About the RGB Tool Palette 12345Introduction Contents at a Glance Basic Operation Advanced Operation Advanced Image Editing and Printing EditingJPEG/TIFFImages Index Processing Large Numbersof Images Reference You can adjust images with the tool palette by switching between the [RAW] , [RGB] and [NR/Lens/ALO] tab sheets according to your editing requirements. The [ RGB] tool palette functions are the same as ordinary image editing software, such as tone curve adjustment that is explained here, with which you can adjust RAW images. However, because the adjustment width of the functions in the [RGB] tool palette is wider than the [RAW] tool palette, the image color may be saturated, or the image quality may deteriorate if you adjust too much. Therefore we recommend for functions other than tone curve adjustment (p. 54) and automatic adjustment (p.30) , that you adjust images using the same functions available in the [RAW] tool palette. Refer to Chapter 5 for explanations on functions of the [RGB] tool palette other than tone curve adjustment. Using the tool palette We recommend that as a general principle you edit RAW images using the [RAW] tool palette. However, where the adjustment width with the [RAW] tool palette is not wide enough and you wish to use the special functions in the [RGB] tool palette, we recommend that you adjust your images at the necessary lowest limit with the [RGB] tool palette after having completed basic adjustment with [RAW] tool palette. Use the adjustment function of the [NR/Lens/ALO] tool palette (p.110) when applying the Auto Lighting Optimizer (p.57) , reducing noise (p.58) or correcting aberration (p.59) after you have made any required adjustments with the [RAW] and [RGB] Using the Auto Lighting Optimizer If the shooting result is dark or the contrast is low, you can use the Auto Lighting Optimizer function to auto- correct the brightness and contrast, and obtain a more pleasant image. You can also change the settings of the image shot with the camera’s Auto Lighting Optimizer function. This function is compatible only with RAW images shot with EOS 5D Mark II, EOS 7D, EOS 50D, and EOS REBEL T1i/500D. * ALO stands for Auto Lighting Optimizer. 1 1 Select the [NR/Lens/ALO] tab sheet from the tool palette in the edit window or edit image window. 2 2 Checkmark the checkbox. Checkmark O For images shot with the camera’s Auto Lighting Optimizer function, the checkbox is already checked. 3 3 Change the settings according to your preferences. Select from three levels: Low/Standard/Strong . Auto correction is applied to the image to match the settings. O For images shot with the camera’s Auto Lighting Optimizer function, the settings at the time of shooting are applied as the default values. O To cancel the Auto Lighting Optimizer, remove the check mark from the checkbox. 12345Introduction Contents at a Glance Basic Operation Advanced Operation Advanced Image Editing and Printing EditingJPEG/TIFFImages Index Processing Large Numbersof Images Reference When [Highlight priority] is set to [Enable] Functions, the Lighting Optimizer function cannot be set. Reducing Noise You can reduce noise that arises in RAW images shot at night or with a high ISO speed. NR is an abbreviation for “noise reduction” . 1 1 Select the [NR/Lens/ALO] tab sheet from the tool palette in the edit window or edit image window. 2 2 Click the [NR Preview] button. . The [ NR Preview] window appears. 3 3 Adjust an image. Navigator window Enlargement display position Drag the sliders NR check window O You can set a noise reduction level from within a range of 0 to 20. The larger the setting, the larger the noise reduction effect. O The noise reduction effect can be checked when an image is displayed at 100% in the NR check window. O You can change the display position of the NR check window by dragging the enlargement display position in the navigator window. 4 4 Click the [Apply] button. . Noise reduction is applied to the image and the image is redisplayed. The noise reduction function does not work Noise reduction cannot be applied when [Viewing and saving RAW images] (p. 72) is set to [High speed] in the [ Preferences] window. Select [ High quality] to reduce noise. To set the same noise reduction level for several images After selecting multiple images in the main window, you can set the same noise reduction level for the images without displaying the [NR Preview] window, by adjusting the noise reduction level in the [NR/Lens/ ALO] tool palette (p.110) using the [Luminance noise reduction] and [Chrominance noise reduction] sliders, and then clicking the [Apply] button. .. You can set the default noise reduction beforehand, using [Default noise reduction settings] in the [ Tool palette] tab sheet in the [Preferences] ( p. 75) . • When [Apply camer...