Оценок - 1, средний балл: 3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
• ..Depending on the number and length of the scenes recorded, the One-Touch Dubbing may take some time. • ..In the following cases, the button will not light up in step 2 and you cannot use the One-Touch Dubbing function: -The online user registration was not completed correctly. -MyDVD for Canon is still running. -A finalized disc is not inserted in the camcorder. -A brand new disc is not inserted in the computer’s DVD drive. -The disc in the camcorder is a DVD-RW recorded in VR mode but the disc in the computer’s DVD drive is a DVD-R disc. -The disc in the computer’s DVD-drive is a DVD-R DL disc. • ..If none of the previous applies but the button still does not light up, look for the icon in the computer’s desktop toolbar. If does not appear, disconnect the USB cable from both, the camcorder and the computer. Restart the computer and turn the camcorder off and then on again. Then, connect the camcorder to the computer again. Transferring Recordings to the Computer 1 Insert the source disc into the camcorder. You can use any disc regardless of whether it is finalized or not. 2 Run MyDVD for Canon. 3 Click on the “DVD-Video” option in the New Project tab. 4 Check that the DISC access lamp is not on or flashing and click on the “Open Disc” icon. 5 Click on the “Import” button. Thumbnails of the imported scenes and still images will be displayed in the video project screen. 6 Click “OK”. 7 To save the project, click on “Save Project” from the Project Tasks palette. The scenes and still images displayed in the main screen will be saved. IMPORTANT • ..Photomovie scenes created on a disc initialized in VIDEO mode cannot be transferred to the computer using MyDVD for Canon. • ..If you create Photomovie scenes on a DVDRW initialized in VR mode, you will not be able to transfer any recordings to the computer using MyDVD for Canon. Creating Backup Copies of your DVD 1 Insert a finalized disc into the camcorder. 2 Run MyDVD for Canon. 3 Click on the “Make a Backup DVD” option in the New Project tab. 4 Select the camcorder as the “Device to read from”. 5 Select the computer’s DVD drive (with writing capabilities) as the “Device to write to”. If your computer is not equipped with a DVD drive with writing capabilities, select the camcorder also as the “Device to write to”. 6 Check that the DISC access lamp is not on or flashing and click on the “Copy” button. 7 Follow the indications on the screen. Connecting to a Computer 87 If you selected the camcorder itself as the “Device to write to”, after the camcorder finishes reading the original disc, remove it and insert a brand new DVD-R or DVD-RW disc into the camcorder. 8 When the “Your disc was created successfully” screen appears, click “OK”. The copied disc will be finalized and automatically ejected from the drive. IMPORTANT • ..To make a copy of a disc recorded in VR mode, be certain to insert a DVD-RW disc into the computer’s DVD drive. • ..The software does not support writing on DVD-R DL discs. • ..Always use a brand new disc as the target disc in the computer’s DVD drive or the camcorder. • ..If you are using a computer’s DVD drive to make the backup copy you can also use a fully erased DVD-RW disc. To fully erase a DVD-RW disc you will need DVD authoring software. • ..When you are using a DVD-RW disc as the source disc, if the tray of a DVD drive other than that selected in step 5 opens when you need to insert the target disc, some recordings on the source disc may be lost. Click on “Cancel” and restart the computer. Transferring Still Images - Direct Transfer With the supplied USB cable and Digital Video Software you can transfer still images to a computer. With the you can do so simply by pressing . Preparations The first time you connect the camcorder to the computer, you need to install the software and set the auto-launch setting. From the second time on, you will only need to connect the camcorder to the computer to transfer images. 1 Install the supplied Digital Video Software. See Installing theSoftwarein the Digital Video Softwareinstruction manual (electronic version on PDF file). 2 Set the camcorder to mode. 3 Connect the camcorder to the computer using the USB cable. See Connecting theCamcordertoa Computerin the Digital Video Software instruction manual (electronic version on PDF file). 4 Set the auto-launch setting. • See Starting CameraWindow (Windows) or Auto-downloading (Macintosh) in the Digital Video Softwareinstruction manual (electronic version on PDF file). • The direct transfer menu appears on the camcorder screen and the button lights up. IMPORTANT • ..Correct performance cannot be guaranteed for discs recorded on another digital device and inserted in this camcorder. • ..When the DISC or CARD access indicator is on or flashing do not perform the following actions. Doing so may result in permanent data loss. -Do not subject the camcorder to vibrations or strong impacts. -Do not open the disc cover/memory card slot cover and do not remove ...
Эта инструкция также подходит к моделям:Видеокамеры - DC50 (5.19 mb)
Видеокамеры - DC230 (5.19 mb)