Войти:
Оценок - 5, средний балл: 3.4 ( )

Инструкция по эксплуатации Canon, модель CN-E50mm T1.3 L F

Производитель: Canon
Размер: 6.29 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


(EEA: Norway, Iceland and Liechtenstein) 3 GENERAL SAFETY INFORMATION The safety warnings and cautions provided on the product or in this operation manual must be observed. Meaning of Symbols WARNING This indicates a potentially hazardous situation which, if not heeded, may result in death or serious injury to you or others. Be sure to heed all warning notices to ensure safe operation at all times. CAUTION Indicates hazardous situations which, if not heeded, may result in minor or moderate injury to you or other persons, or damage to your property. NOTE Thisindicatesessential information andrecommendations for operation. HANDLING THE PRODUCT WARNING 1. Do not stare at the sun or other source of high- intensity light through the lens. Doing so could injure your eyes. CAUTION 1. Inspect all mountings periodically (about every 6 months to 1 year) to make sure they are securely tightened, and tighten any loose parts. Otherwise, the lens may fall, possibly causing injury. NOTE 1. Do not bring the lens, kept in a very cold ambient temperature, into a warm room, because the lens may fog on the inside or condensation may occur. In these cases, the lens cannot be used until these problems clear. If the lens must be used under such conditions, countermeasures are recommended. 4 STORAGE NOTE 1. If the lens becomes damp because of use in fog, mist, or drizzle, wipe off the moisture with a soft dry cloth and seal the lens together with an effective desiccant in a vinyl bag to remove moisture that has entered the interior. TO THE CUSTOMER 1. Canon shall bear no responsibility for damage resulting from improper operation of this product by the customer. 2. The product specifications, configuration, and appearance are subject to change without prior notice. 3. For further information on repairs, maintenance, or adjustments not mentioned in this operation manual, contact your Canon dealer or your Canon sales representative. 4. Note that Canon may be unable to undertake servicing or repair of a product if it is modified without consulting Canon or your Canon sales representative. CANON INC. Canon Europe Ltd 30-2, Shimomaruko 3-chome, Ohta-ku, 3 The Square, Stockley Park, Uxbridge, Tokyo 146-8501, Japan Middlesex, UB11 1ET UK All rights reserved. No part of this operation manual may be reproduced or copied in any form or by any means without the written permission of Canon Inc. 5 Product Configuration Lens body.............................1 Lens cap...............................1 Rear lens cap .......................1 Operation Manual ................1 Operation Manual Lens cap Lens body Rear lens cap 6 Names of Parts Focus drive gear Number of teeth: 146 Module: 0.8 P.C.D.: 116.8 mm Iris drive gear Number of teeth: 126 Module: 0.8 P.C.D.: 100.8 mm Angular rotation: 300° Angular rotation: 36° EF mount 7 Mounting and Detaching the Lens See your camera’s instructions for details on mounting and detaching the lens. Mounting the lens 1 2 Remove the rear lens cap. Mount the lens on the camera. 8 Detaching the lens Detaching the lens 2 Detach the lens from the camera. Attach the rear lens cap to the detached lens. • After detaching the lens, place the lens with the rear end up to prevent the lens surface and NOTE contacts from getting scratched. • If the contacts get soiled, scratched, or have fingerprints on them, corrosion or faulty connections can result. The camera and lens may not operate properly. • If the contacts get soiled or have fingerprints on them, clean them with a soft cloth. 9 Available accessories A variety of professional camera accessories are available using cinema adaptors. Be sure to check the mounted condition before use. 10 11 Lens support CAUTION When using an EF mount lens with a lens support mounted, mount the lens to the camera by following the steps below. 1A lign the lens with the camera mount so that both mounting surfaces are in complete contact, and then rotate the lens in the direction of the arrow until it is securely mounted on the camera. 2S ecure the lens to the lens support using the optional adaptor. 3 Push the lens toward the camera until both mounting surfaces are in complete contact and clamp the lens support to the rods. Adaptor Dimensions of parts EF mount Unit: mm R50.8 60° 30° . T 2 2.8 4 5.6 8 11 1622 1.5 CANON .114(4.1) 2 x M3 42.244.32 x M313" 22" 14" 15" 16" 17" 18" 19" 20" 23" 2 21" 30 876 4'6 4 3'9 5 3 3'6 3'3 15 10Filter size o105 Spur gear specifications Focus drive gear Iris drive gear Number of teeth 146 126 Module 0.8 0.8 P.C.D. 116.8 mm 100.8 mm Angular rotation 300 degrees 36 degrees 12 Specifications CN-E24mm T1.5 L F CN-E50mm T1.3 L F CN-E85mm T1.3 L F Lens Mount Canon EF Focal Length 24 mm 50mm 85mm Maximum T-stop 1:1.5 1:1.3 1:1.3 Diaphragm Blade 11 pieces Coverage 35mm full size Image Circle / H x V(1.5:1) .43.3 mm / 36.0 x 24.0 mm H / V 73.7 / 53.1 degrees 39.6/ 27 degrees 23.9/ 16.1 degrees Coverage Image Circle / H x V(1.78:1) .28.2 mm / 24.6 x 13.8 mm H / V 54.3 ...

Эта инструкция также подходит к моделям:
Видеокамеры - CN-E85mm T1.3 L F (6.29 mb)
Видеокамеры - CN-E24mm T1.5 L F (6.29 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории