Оценок - 3, средний балл: 4.3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
• Video snapshot scenes cannot be captured from any of the following types of scenes. -Scenes shorter than 1 second Video .. 113 -Scenes that were edited using the supplied software VideoBrowser and were then transferred back to the camcorder. • When the source scene is itself a video snapshot scene, you may not be able to capture a video snapshot scene depending on the length of the source scene and the length currently selected for video snapshot scenes. • When you start capturing a video snapshot scene less than 1 second from the end of the scene, the video snapshot scene will be captured starting from the beginning of the following scene. • During the playback of video snapshot scenes captured from a previously recorded movie, you may notice some anomalies in the picture/ sound at the point where the playback switches to a new scene. Capturing Photos You can capture a single photo or a series of photos. The size of the captured photos will be 1920x1080 and it cannot be changed. Please read the IMPORTANT section before using an Eye-Fi card. To select the photo capture settings [MENU] 888 [Photo Capture from Video] 8[A Single Photo] or [B Photo Sequence] 8[a] To capture the photos 1 Play back the scene or story from which you want to capture the photo. 2 Pause the playback at the point you want to capture. 3 Touch [PHOTO]. To capture a photo sequence, keep touching [PHOTO]. The scene will be played back frame-by-frame and each frame captured as a separate photo. 4Touch [B] to stop the playback. IMPORTANT • When capturing photos on an Eye-Fi card in memory card slot Y, photos will be uploaded automatically if you are within the range of a config114 • Video ured network. Always verify that Eye-Fi cards have been approved in the country/region of use. See also Using an Eye-Fi card(0140). NOTES • The data code of the photos will reflect the date and time of recording of the original scene. • Photos captured from a scene with a lot of fast movement may be blurred. • Photos will be recorded on the memory selected for recording photos. •[B Photo Sequence]: -Up to 100 photos can be captured at a time. -The photo sequence capture will stop when the end of the scene is reached (playback will pause at the beginning of the following scene). -Photos will be captured at intervals of 1/25 second. Dividing Scenes You can divide scenes in order to leave out the best parts and later cut out the rest. Operating modes: 1 Play back the scene you want to divide. 2 Pause the playback at the point where you want to divide the scene. 3 Open the scene division screen. [Edit] 8 [Divide] 4 Bring the scene to a precise point, if necessary. Playback controls will appear on the screen (053). Use any special playback modes (fast playback, frame reverse/advance) as necessary to locate the desired point. 5 Divide the scene. [A Divide] 8 [Yes] Video .. 115 • The video from the division point to the end of the scene will appear as a new scene in the index screen. NOTES • When advancing/reversing frames while dividing the scenes, the interval between frames is about 0.5 seconds. • If the scene cannot be divided at the point where you paused the playback, advance/reverse a frame and then divide the scene. • During the playback of a scene that was divided, you may notice some anomalies in the picture/sound at the point where the scene was cut. • The following scenes cannot be divided: -Video snapshot scenes and other scenes that are too short (less than 3 seconds). -Scenes that were edited using the supplied software VideoBrowser and were then transferred back to the camcorder. • Scenes cannot be divided within 1 second from the beginning or the end of the scene. 116 • Video Photos Refer to this chapter for details on viewing photos and other photo-related operations. Viewing Photos Operating modes: 1Press S. 2 Open the [Photos] index screen, if it is not displayed. [b] 8 [Photos] 3 Look for the photo you want to play back. Move the zoom lever toward Q to show 15 photos per page; move it toward P to show 6 photos per page. Photos .. 117 AMemory being read. BDrag your finger left for the next index page.* CDrag your finger right for the previous index page*. DOpen the index selection screen (055). EDivision line between recording dates. * While browsing through index pages, a scroll bar will appear at the bottom of the screen for a few seconds. When you have a large number of photos it may be more convenient to drag your finger along the scroll bar. 4 Touch the photo you wish to view. • The photo is displayed in single photo view. • Drag your finger left/right to browse through the photos one by one. To return to the index screen from single photo view 1 Touch the screen to display the playback controls. 2Touch [Q]. Photo Jump Function When you have recorded a large number of photos, you can jump easily through the photos using the scroll bar. 1 Touch the screen to display the playback controls. 2 Jump through the photos using the scroll bar. [...
Эта инструкция также подходит к моделям:Видеокамеры - LEGRIA HF M400 (9.77 mb)
Видеокамеры - LEGRIA HF M40 (9.77 mb)