Войти:
Оценок - 5, средний балл: 4.2 ( )

Инструкция по эксплуатации Canon, модель XF105

Производитель: Canon
Размер: 81.26 kb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


To add multiple clips: Select the desired clips in the Browse area and click Add Selection to Queue. • The clips in the Transfer Queue will be transferred automatically and saved with the latest project. • Relay clips (continuously recorded clips that spanned multiple CF cards) will not be recognized as a single clip. Such clips will be treated as separate clips for transfer. 6. Close the Log and Transfer window. 7. Drag the icon of the CF card in the card reader or the icon of the camcorder to the trash can icon to safely eject the media and then disconnect the card reader or camcorder. 1 IMPORTANT • Please observe the following precautions. Failing to do so may result in permanent data loss. While a CF card is connected to the computer: -Do not remove the CF card or the CF card reader. -Do not access, change or delete any of the CF card’s folders or files directly from the computer. Always access the files on the CF card only using the procedure described above. When the camcorder is connected directly to the computer: -Do not open any of the CF card slot covers and do not remove the CF cards. -Do not disconnect the USB cable. -Do not turn off the camcorder or the computer. NOTES • Use of a commercially-available, UDMA-compatible card reader is recommended. • Depending on the system used (the computer’s performance specifications, transfer rate of the CF card, etc.), transferring the clips can take some time. • For computers running Final Cut Pro 7.0.2 or earlier: It may not be possible to transfer or play back clips recorded with video configurations using the 50 Mbps (4:2:2) bit rate with the following combinations of resolution and frame rate: 1280x720, 29.97P; 1280x720, 25.00P; 1280x720, 23.98P. Upgrade to Final Cut Pro 7.0.3 or perform the following procedure. Install Canon XF Plugin for Final Cut Pro included on the Canon XF Utilities Disc supplied with the camcorder. When transferring the clip, select an Apple ProRes 422 option for [Target Format (Transcode to)]. • If you are using the Log and Transfer window to play back clips in the camcorder while it is connected to the computer, playback may not be smooth and frames may be dropped. Remove the CF card from the camcorder, insert the CF card into a card reader, connect the card reader to the computer, and then play back the clips. Error Messages Clips recorded using the following video configurations cannot be used in this environment 50 Mbps (CBR, 4:2:2), 1920 x 1080, 24.00P // 50 Mbps (CBR, 4:2:2), 1280 x 720, 24.00P -24.00P clips cannot be transferred to Final Cut Pro because Canon XF MPEG2 Decoder is not installed. Perform steps and . as described in For computers running Final Cut Pro 7.0.2 or earlierin the NOTES above. Cannot read the clips -The video files may have been moved or damaged. If you moved the files, move or copy them back to the original folder. If you have not moved the files, use backup copies of the clip, if you have them. Trademark Acknowledgements • Apple, Mac...

Эта инструкция также подходит к моделям:
Видеокамеры - XF305 (81.26 kb)
Видеокамеры - XF300 (81.26 kb)
Видеокамеры - XF100 (81.26 kb)
Видеокамеры - EOS C300 PL (81.26 kb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории