Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
The plugin uses Avid Media Access (AMA) architecture to link the clips in the camcorder or on a CF card directly into a bin in Avid Media Composer or NewsCutter (collectively referred to as 'editing software'). Refer also to the instruction manuals of the editing software used. Preparations This plugin is compatible with Media Composer, version* 4.0.5, 5.0 or 5.5, and NewsCutter, version* 8.0.5, 9.0 or 9.5. Complete the following preparations before using this plugin. * As of October 2011, clips that were recorded using the 50 Mbps (4:2:2), 1280x720, 23.98P video configuration are not supported by Media Composer, version 4.0.5 or 5.0.0 or NewsCutter, version 8.0.5 or 9.0.0. (Update Media Composer to the latest release of version 5.0 or 5.5 or NewsCutter to the latest release of version 9.0 or 9.5.) Also, clips recorded using the 25 Mbps (4:2:0), 1440x1080, 29.97P video configuration will be treated as 59.94i clips. To edit a video project as a 29.97P project, please use clips recorded using the 50 Mbps (4:2:2), 29.97P or 35 Mbps (4:2:0), 29.97P video configurations. As of October 2011, clips that were recorded using the 24.00P frame rate are not supported by Media Composer or NewsCutter. 1. When using Media Composer 4.0.5 or 5.5 or NewsCutter 8.0.5 or 9.5 only Download and install the following plugin offered by Avid: Avid AMA MXF Plug-in. For details, refer to Avid’s Web page. 2. Start up the editing software and check the AMA settings. Make sure that the Enable AMA Volume Management option is checked. Linking clips directly from the camcorder or from a CF card Using AMA architecture, you can link clips to the editing software directly from a CF card inserted into a card reader connected to your computer. If your camcorder features a USB terminal, you can also connect the camcorder to the computer using a USB cable to link clips directly from the camcorder. For details about linking media with AMA, refer to the instruction manuals of the editing software used. 1. Start up the editing software. 2. Connect the CF card or the camcorder to the computer. • CF card: Connect a commercially available card reader compatible with CompactFlash memory cards to the computer and insert the CF card into the card reader. • Camcorder equipped with a USB terminal: . Power the camcorder using the compact power adapter. . Turn on the camcorder and set in MEDIA mode. . Connect the camcorder to the computer using a USB cable. Use the optional IFC-400PCU USB cable or similar mini-B USB cable. • The editing software will automatically scan the CF card or the camcorder and link the clips into a bin (based on the software's AMA settings). The Bin window will open and show the linked clips. 3. Continue the editing operation in the editing software. Consult the software’s guides and help files as necessary. 4. When you finish editing the clips, use the Safely Remove Hardware function to terminate the connection to the hardware. 1 5. Disconnect the card reader or camcorder ...
Эта инструкция также подходит к моделям:Видеокамеры - XF300 (84.66 kb)
Видеокамеры - XF105 (84.66 kb)
Видеокамеры - XF100 (84.66 kb)
Видеокамеры - EOS C300 PL (84.66 kb)