Оценок - 4, средний балл: 4.5
(
)
)
|
Фото и характеристики Canon MV550i |
К этому устройству также есть другие инструкции:
Фрагмент инструкции
E 16:9 Audio input and Microphone input ( 99) Audio input Microphone input FADE–T WIPE WIPE DV input ( 88, 111) M.FADE DV IN AUDIO IN MIC.IN AV DV ART Analog-digital converter ( 93) BLK&WHT SEPIA Condensation warning ( MOSAIC 141) WSON +– SPEAKER Memory Card Displays No memory card is inserted ( 105) Image quality( 105) Standard STD Headphones Fine PHONES – + SPEAKER OFF Folder number-File number ( 107) The AV/headphones terminal is switched PHONES Slide show in to headphones progress ( 113) ( 33). Recording to a memory card ( 109) FINE 101-0101 SLIDE SHOW 99 Additional Information 153 E AdditionalInformation The number of still images that can still be recorded on the memory card ( 106) (Green: 6 or more images. Yellow: Between 1 and 5 images Red: No more images) Accessing a memory card ( 112) Current still image/Total number of still images on the memory card ( 112) Protect mark ( 114) Card mix ( 122) Print mark ( 114) Data code ( 82) Formatting a memory card ( 127). Erasing still images ( 120). Connecting to a PC ( 128). 154 99 9/99 9/99<<<< CARD MIX 12:00 AM 1.JAN.2002 Time Code 0:12:34:12 This records counter information, including hour, minute, second, and frame number on a special data code area on the tape itself. It is reset automatically when a new tape is loaded. In TAPE CAMERA mode, the frame number doesn’t appear in the display. Recording reminder 0sec 10sec When you start recording, the camcorder counts from 0SEC to 10SEC. Shots which are shorter than ten seconds may be difficult to edit later. On the other hand, if you are not planning to edit the recording, remember that a shot which does not contain action should generally last no longer than 10 seconds. “ AUTO POWER OFF” AUTOPOWEROFFAUTOPOWEROFF • The camcorder will turn itself off if you leave it in record pause mode for more than about 5 minutes. This display appears 20 seconds (approx.) before the camcorder turns off. Caution phrases The camcorder displays various caution phrases — they appear for 4 seconds E before disappearing. Appears each time you turn the power on, until you set the time zone, date and time ( 53). Appears when the battery pack is exhausted ( 135). Appears when the tape has reached the end. Refer to p.18 Appears when, during DV dubbing, the DV cable is disconnected or the power of the digital equipment connected to the camcorder is turned off. Refer to p.141 SET THE TIME ZONE, DATE AND TIME CHANGE THE BATTERY PACK CHECK THE DV INPUT TAPE END THE TAPE IS SET FOR ERASURE PREVENTION CONDENSATION HAS BEEN DETECTED Appears as a warning to protect the tape and also when condensation is detected. Remove the tape as soon as possible after the camcorder has displayed the caution. Refer to p.90 Refer to p.90, p.91 or p.93 Appears when you try to do audio dubbing or AV insert on a tape recorded in any mode other than SP mode ( 95, 98). Appears when you try to do audio dubbing on a tape recorded in 16-bit audio or 12-bit, 4-channel mode ( 98). Appears when the camcorder detects a blank section of a tape during audio dubbing or AV insert ( 95, 98). REMOVE THE CASSETTE CHECK THE CASSETTE [REC MODE] CHECK THE CASSETTE [AUDIO MODE] CHECK THE CASSETTE [BLANK] COPYRIGHT PROTECTED DUBBING RESTRICTED COPYRIGHT PROTECTED PLAYBACK IS RESTRICTED Additional Information 155 E Appears immediately after you start recording, and the video heads are badly contaminated. Make sure to clean the video heads when this caution appears. ( HEADS DIRTY, USE CLEANING CASSETTE 140) An error has occurred with the memory card. The camcorder can not record or play back. A temporary card error is also possible. If and CARD ERRORMemory card caution phrases CARD ERROR disappears after 4 seconds flashes red, turn the camcorder’s power off and back on again, and remove and reinsert the card. If flashes green, recording or playing back is possible. There is no more remaining memory on the memory card. Change the card or erase images. CARD FULL You have reached the maximum file or folder number. ( 107) NAMING ERROR The image has been recorded in an incompatible JPEG format or other format that the camcorder can not play back, or the image data has been damaged. UNIDENTIFIABLE IMAGE Appears if you have tried to mark 51 or more images for printing, or if a mark file cannot be edited. ( 114) A memory card has not been inserted into the camcorder. ( 105) There are no images recorded on the memory card. You are using an SD Memory Card and it is set for erasure prevention. Change the position of the protect switch. Appears when you press the start/stop button in CARD CAMERA mode. The image isn’t recorded on the cassette or memory card. NO CARD NO IMAGES THE CARD IS SET FOR ERASURE PREVENTION IN CARD POSITION PRINT MARK ERROR AdditionalInformation 156 Specifications MV550i/MV530i Power Supply (rated): 7.4 V DC Power Consumption (while recording with the AF turned on): MV530i MV550i 3.3 W (Using viewfinder), 4.1 W (Using LCD screen) 3.3 W (Using viewfinder), 4.0 W (Using L...
Эта инструкция также подходит к моделям:Видеокамеры - MV530i (5.41 mb)