Оценок - 4, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
• When you are using the [ (Easy Recording) program, autofocus cannot be turned off. • See “Troubleshooting” on p. 124 for a list of subjects which may not be suitable for autofocus. 72 3_ELURA2_E(33-79) 7/25/00 17:10 Page 73 Setting the White Balance The camera’s auto white balance system compensates for a wide range of lighting conditions. Although slight variations are unavoidable, colors will appear natural in virtually every situation. In some cases, you will get better results by setting the white balance yourself, or using one of the two preset modes: T Indoor Mode • Under halogen or studio/video lighting • Subject is of one dominant color • Close ups U Outdoor mode • In daylight, especially for close- ups and where the subject is of one dominant color CARD RECMOVIE P.SCAN WHITE BAL.••AUTOCAM.SET UP ( 34) E 1. Make sure the camera is set to the Q (program AE) mode. 2. Open the menu and select CAM.SET UP. 3. Select WHITE BAL. 4. a) For the indoor, outdoor or auto settings, press the SELECT dial in to choose the setting. • T/U appears in the display when you set the white balance to indoor/outdoor mode. b) To set the white balance yourself, point the camera at a white object (such as a sheet of paper) and zoom in until it fills the display. Then press the SELECT dial in to select SETW. Select SETW again. • Make sure to continue pointing the camera at the white object until you have finished setting the white balance. • The W display flashes then remains lit. • Depending on the light source, the flashing may at times continue. The result will remain better than with the auto setting and you can continue recording. Using the FullRange of Features 5. Close the menu. 73 3_ELURA2_E(33-79) 7/25/00 17:10 Page 74 Setting the white balance manually will probably work better than auto white balance when shooting: Subjects with one dominant color, such as sky, sea or forest E Close-ups In rapidly changing lighting conditions In places lit by certain types of fluorescent or mercury vapor lights Using the FullRange of Features • Turn the digital zoom off (if neccessary) to set a more accurate white balance. • If you have set the white balance and lighting conditions change, reset the white balance. • Try to record with light from a single source. Correct white balance cannot be obtained for two types of lighting at once. • You cannot set the white balance or choose the indoor/outdoor mode when the program selector is set to the [ (Easy Recording) program. • The white balance returns to the AUTO setting when you slide the program selector to [ (Easy Recording). • When you turn the camera on, the white balance returns to AUTO. If you then switch the white balance to SET, the camera will remember your last setting. • During normal outdoor shooting, setting to AUTO may provide better results. 74 3_ELURA2_E(33-79) 7/25/00 17:10 Page 75 Displaying Date, Time and Camera Data (Data Code) The data code contains the date and time the recording was made. Cassette data codes can also display camera data (shutter speed and exposure settings). E DATA CODE MENU FOCUS/ DATA CODE During VCR mode, the data code can be displayed or hidden while the camera is in play, slow or still mode. Camera data may be displayed as “– – –” during fast forward, rewind, reverse playback, forward and reverse .2 playback. Using the FullRange of Features Press the DATA CODE button while the camera is in play, slow or still mode. • Press it once to display, once more to hide it. Selecting date/time Select whether you want the date, the time, or both to show up on your data code display ( 76). D/TIME SEL.•DATE & TIMEDISP.SET UP ( 34) CARD PLAY VCR To change the date and time combination, open the menu and select DISP.SET UP. Then select D/TIME SEL., set it to DATE, TIME or DATE & TIME and close the menu. 75 3_ELURA2_E(33-79) 7/25/00 17:10 Page 76 E You can also choose to display camera data (shutter speed and exposure settings) Setting the data code in cassette data codes. DATA CODE•••DATE/TIMEDISP.SET UP ( 34) VCR To change, open the menu and select DISP.SET UP. Then select DATA CODE, set it to DATE/TIME, CAMERA DATA or CAM. & D/T and close the menu. Possible data code combinations: DATA CODE D/TIME SEL. (cassette only) Date/Time Camera data Date/Time & Camera data Date JAN. 1,2000 2F32 1/2000 F32 1/2000 JAN. 1,2000 Time 12:00:00 AM F32 1/2000 F32 1/2000 12:00:00 AM Date & Time 12:00 AM JAN. 1,2000 F32 1/2000 F32 1/2000 12:00 AM JAN. 1,2000 Using the FullRange of Features • The data code will read “– – –” in the following situations: – During playback of a blank section of tape. – If the tape was recorded before entering the date and time in the camera’s memory. – If the tape was recorded on a camera without a data code function. – If noise or tape damage prevents the data code from being read. • If a recording made on ELURA2/ELURA2 MC is played back on a different DV camcorder, the data code may not be displayed correctly. • The data code will appear i...
Эта инструкция также подходит к моделям:Видеокамеры - Elura 2 (5.57 mb)