Войти:
Оценок - 1, средний балл: 4 ( )

Инструкция по эксплуатации Canon, модель XL H1

Производитель: Canon
Размер: 7.47 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


3. Open the menu and select [CAMERA SETUP]. Select [CLEAR SCAN], adjust the frequency and close the menu. Adjust the frequency so that the black band does not appear. Recording 89 Using the Custom Keys You can assign frequently used functions to the custom keys. The custom keys can have different functions assigned to them in each of the different operation modes. Default settings: CUSTOM KEY 1 TIME CODE TV SCREEN ZEBRA TV SCREEN CUSTOM KEY 2 INDEX WRITE DATA CODE TV SCREEN DATA CODE The following functions can be assigned to the custom keys: Time code Time code hold 2 Time code Index write Audio level TV screen Zebra pattern EVF B&W mode Data code VCR stop 2 CP backward key 1,2 Audio level TV screen Flip EVF 2 Time code hold 2 EVF B&W mode Zebra pattern TV screen TV screen Data code EVF B&W mode EVF B&W mode CP backward key 1,2 Flange back Flip EVF 2 1 Can only be assigned to Custom Key 2. 2 This function can only be operated with a custom key. To check the current custom key settings: In recording mode: Open the menu and select [DISPLAY SETUP/ ]. Select [GUIDE INFO], set it to [CUSTOM KEYS] and close the menu. In VCR/PLAY mode: Open the menu and select [DISPLAY SETUP/ ]. Select [CUSTOM KEYS], set it to [ON] and close the menu. Changing the Custom Keys Setting MENU ( 31) SYSTEM/ CUSTOM KEY 1•INDEX WRITE E Open the menu and select [SYSTEM/ ]. Select [CUSTOM KEY 1] or [CUSTOM KEY 2], select the function you wish to assign to the custom key and close the menu. When you do not wish to use the custom keys, select [(NONE)]. Activating the Functions with the Custom Key Time Code ( 58) Press the CUSTOM KEY (1 or 2) button. The time code setting menu appears. Index Write You can add an index signal to your recording for easy search in VCR/PLAY mode. Press the CUSTOM KEY (1 or 2) button. • The index signal will be recorded for approx. 6 seconds. • When the camcorder is in record pause mode, the index signal will be written when you start recording. An index signal cannot be added or erased later. Zebra Pattern ( 80) Press the CUSTOM KEY (1 or 2) button. The zebra pattern is activated. Press the button again to deactivate it. VCR STOP ( 43) When the camcorder is in record pause mode, you can turn off the recorder section. If the [POWER SAVE] option in the [SYSTEM/ ] submenu is set to OFF, even in VCR STOP mode, the camera section is still powered, allowing you to adjust the camera settings without worrying about the tape or the video heads. VCR STOP can only be operated with the custom keys. Press the CUSTOM KEY (1 or 2) button. The VCR STOP mode is activated. Press the button again to return to record pause mode. You can also start recording by pressing the start/stop button directly in VCR STOP mode. TV Screen ( 132) You can show the camcorder display on a connected TV. Press the CUSTOM KEY (1 or 2) button. Recording 91 92 Time Code Hold You can press the custom key button to freeze the display of the time code. The time code will continue running normally even while the time code display is on hold. Time Code Hold can only be operated with the custom keys. Press the CUSTOM KEY (1 or 2) button. • Pressing the custom key button again will reactivate the normal display of the time code. • While on hold, the time code will be displayed with an next to it and “HOLD” appears on the side panel display. • The time code being output from the TC OUT, SDI, LANC and HDV/DV terminals will not be put on hold. The time code superimposed on the video signal output from the COMPONENT OUT (D-) Terminal or the Video/S-Video terminals will be put on hold. • The time code hold will be canceled when you turn the camcorder on/off, change the operation mode CAMERA/VCR/PLAY or change the position of the TAPE/CARD switch. Audio Level Indicator ( 67) Press the CUSTOM KEY (1 or 2) button. The audio level indicator appears. Press the button again to hide the audio level indicator. EVF Black & White Mode Press the CUSTOM KEY (1 or 2) button. The image on the screen will be shown in black & white (on-screen displays and indicators will still be displayed in color). Press the button again to return to color display. Flange Back Adjustment Press the CUSTOM KEY (1 or 2) button. The flange back adjustment menu appears. CP Backward Key Press the CUSTOM KEY 2 button. Usually, pressing the CUSTOM PRESET SELECT button will cycle forwards to the following custom preset file. After activating the Custom Preset Direction, pressing the button will instead cycle backwards to the preceding custom preset file. The Custom Preset Direction can only be operated with the custom keys. Flip EVF Press the CUSTOM KEY (1 or 2) button. Activating the function will reverse the displayed image both upside/down and right/left. This affects only the display and the video signal being output from all terminals will not change. With HDV compatible XL lenses, the FLIP EVF function will be deactivated while displaying the menu screens. FLIP EVF can only be operated with the cu...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории