Оценок - 5, средний балл: 4.6
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
[BLK] = [PRESS], [PED] = -2, [SET] = -2 Custom Preset [8 CINE.V] For playback on a monitor TV with a film-like feel. [GAM] = [CINE1], [KNE] = [LOW], [BLK] = [STRETCH], [SHP] = -4, [CMX] = [CINE1], [CGN] = -20, [CPH] = 5, [RBM] = -5, [GRM] = -5 [GBM] = -5, [BRM] = 5, [BGM] = 12 Custom Preset [9 CINE.F] For video transfer to film. [GAM] = [CINE2], [KNE] = [LOW], [BLK] = [STRETCH], [SHP] = 6, [CMX] = [CINE2], [RGN] = -8 *All other settings are left at their neutral values. 93 Customization Adjust the dynamic range (knee point) in the highlight area of the image to prevent overexposure. You can Output [HIGH] select from [AUTO], [HIGH], [MIDDLE] or [LOW]. [MIDDLE] [LOW] [BLK] Black Stretch/Black Press [STRETCH] Adjust the dynamic range in the shadow area of the image. You can select from [STRETCH], [MIDDLE] or [MIDDLE] [PRESS]. [STRETCH]: emphasizes contrast in the dark area. [PRESS]: enhances or deepens darkness. [PRESS] Representation of the setting Input [PED] Master Pedestal [GAM] Gamma Curve The gamma curve changes the overall look of the image. Output You can select from [NORMAL], [CINE1] or [CINE2]. [NORMAL]: standard gamma setting suitable for video. [CINE1]: appropriate for video telecined from film. [CINE2]: appropriate for transfer to film. Input [KNE] Knee Point Adjustment [NORMAL] [CINE1] [CINE2] Representation of the setting Adjust the master pedestal level in the range -9 to +9. The master pedestal lowers or raises the baseline of the luminance signal affecting only the shadow areas. Set [-] values to subdue the dark areas, or set [+] values to get more detail in the shadows. [SET] Setup Level Adjust the setup level in the range -9 to +9. The setup level lowers or raises the whole gamma curve controlling the darkest level of black in the image. Set [-] values to get a darker image, or set [+] values to get a brighter image. • Depending on the value set for the master pedestal [PED], the setup level may not be able to take a negative value. As a result, adjusting the setup value within a certain value range will have no effect. [SHP] Sharpness Adjust the sharpness level in the range -9 to +9. Noise artifacts caused by too-high sharpness settings can be reduced using the coring setting. [HDF] Horizontal Detail Frequency Select the horizontal definition of the image from [HIGH], [MIDDLE] or [LOW]. [DHV] Horizontal/Vertical Detail Balance Adjust the balance between horizontal and vertical definition of the image in the range -9 (only horizontal) to +9 (only vertical). [COR] Coring Adjust the coring level in the range -9 to +9. Set higher coring values to help reduce the noise artifacts caused by high sharpness levels. [NR1] Noise Reduction 1 You can select from [OFF], [HIGH], [MIDDLE] or [LOW] to reduce the noise caused by shooting in dark places or by increasing the gain too much. • When picture noise is already low due to the gain settings, the noise reduction function may not be noticeable. When activated (settings other than [OFF]), moving subjects may leave a trailing afterimage. [NR2] Noise Reduction 2 You can select from [OFF], [HIGH], [MIDDLE] or [LOW] to reduce the noise caused by shooting fast moving objects. Results in an effect similar to applying the skin detail function over the whole picture. • Unlike with the [NR1] setting, a trailing afterimage will not appear. [CMX] Color Matrix Color mix affects the fundamental color settings and affects the feel of the whole image. You can select from [NORMAL], [CINE1] or [CINE2]. [CGN] Color Gain Adjust the color intensity in the range -50 to +50. [CPH] Color Phase Adjust the color phase in the range -9 to +9. Color phase affects the overall balance of the colors in the picture. Set [-] values to adjust the colors toward violet/red tones, or set [+] values to adjust the colors toward green/blue tones. Customization 95 [RGN] R Gain Adjust the intensity of red tones in the range -50 to +50. [GGN] G Gain Adjust the intensity of green tones in the range -50 to +50. [BGN] B Gain Adjust the intensity of blue tones in the range -50 to +50. [RGM] R-G Matrix The R-G matrix changes the tint of the picture along the cyan/green and red/magenta gradations without affecting blues. Adjust the level in the range -50 to +50. [RBM] R-B Matrix The R-B matrix changes the tint of the picture along the cyan/blue and red/yellow gradations without affecting greens. Adjust the level in the range -50 to +50. [GRM] G-R Matrix The G-R matrix changes the tint of the picture along the magenta/red and green/cyan gradations without affecting blues. Adjust the level in the range -50 to +50. [GBM] G-B Matrix The G-B matrix changes the tint of the picture along the magenta/blue and green/yellow gradations without affecting reds. Adjust the level in the range -50 to +50. [BRM] B-R Matrix The B-R matrix changes the tint of the picture along the yellow/red and blue/cyan gradations without affecting greens. Adjust the level in the range -50 to +50. [BGM] B-G Matrix The B-G matrix chang...
Эта инструкция также подходит к моделям:Видеокамеры - XH G1S (7.34 mb)