Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
When the camera is connected to an external monitor, the LCD monitor will be turned off automatically. NTSC PAL Format Delete All Copy to Card Video Out Reset .. Exit:BACK Yellow - Video White - sound Setup ) - NTSC : U.S.A, Canada, Japan, - PAL : Australia, Austria, Belgium, U.K., Holland, Italy, Kuwait, Spain, Sweden, Switzerland, - When using a TV as an external AV channel of the TV. - There will be a digital noise on the external - If the image is not in the centre of the screen, - When the camera is connected to an external image may not be displayed. - When the camera is connected to an external monitor, on the external monitor and the menu functions are the indicated on the LCD monitor. - When the camera is connected to an external monitor, the button not function. Initialisation All camera menu and function However, values for DATE changed. - Sub menus [No] : Settings will not be restored to their defaults. [Yes] : A confirmation window will display. Select the [Yes] menu by pressing the smart button. All settings will be restored to their defaults. No Yes Format Delete All Copy to Card Video Out Reset .. Exit:BACK .. 77S Important Be sure to observe . This unit contains precision unit in the following locations. - Areas exposed to severe changes - Areas exposed to dust and dirt. - Areas exposed to direct sunlight or the - Environments where there is high magnetism - Areas with high explosives or highly flammable . Do not leave this camera in places subject to dust, naphthalene and mothball), high temperatures or high Keep this camera with silica gel in a hermetically sealed planning to use the camera for a long period of time. . Sand can be particularly troublesome to cameras. - Do not let sand get inside the camera when using it on beaches, coastal or other areas where there is lots of sand. - Doing so may result in failure or may render the camera permanently unusable. . Handling the camera. - Never drop the camera or subject it to severe shocks or vibrations. - Protect the large size LCD monitor from an impact. When this camera is not used, keep it in the camera case. - Avoid obstructing the lens or the flash when you capture an image. - This camera is not waterproof. To avoid dangerous electrical shocks, never hold or operate the camera with wet hands. - If you use this camera in wet places, such as beach or pool, do not let water or sand get inside the camera. Doing so may result in failure or may permanently damage the unit. .. 78S . Extremes in temperature - If the camera is transferred condensation can form on wait for at least 1 hour until all the camera. Moisture built up can also occur on the camera and remove the memory card. dispersed. . Caution on Using the Lens. - If the lens is subjected to direct sunlight, it could result deterioration of the image sensor. - Avoid getting fingerprints or foreign substances on the surface . If the digital camera is not used for a long period, an electric occur. It is a good idea to remove the battery and the memory card if you intend using the camera for an extended period of time. . If the camera is exposed to an electronic interference, it will turn itself off to protect the memory card. Important . Camera Maintenance. - Use a soft brush (available assemblies. If this does not can be used. Clean the camera body with a soft contact with solvent materials such may damage the body shell of the camera Rough handling can damage the LCD monitor. and keep the camera in a protective carrying . Do not attempt to disassemble or modify the camera. . Under certain conditions, static electricity can cause the This is not harmful to the camera and is not a malfunction. . When images are uploaded or downloaded, the data transfer may affected by static electricity. In this case, disconnect and re-connect the USB cable before trying the transfer again. . Always check the condition of the camera before an important event or going on a trip. - Take a picture to check that the camera is working correctly and ensure you have a fully charged spare battery. - Samsung cannot be held responsible for camera malfunctions. Warning There are several [Memory Error!] .. Memory card error . Turn off the camera power and turn . Insert the memory card again. . Insert and format the memory card. (p. [Card Locked!] .. The memory card is locked . SD/SDHC/MMC memory card : Slide the write protect of the memory card. [No Card!] .. A memory card is not inserted . Turn off the camera power and insert the memory card again. . Turn off the camera power and turn it on again. [No Image!] .. There are no images stored on the memory . Take images. . Insert a memory card that is holding some images. [File Error!] .. File error . Delete the erroneous files. .. Memory card error . Contact a camera service centre. .. 79S Warning [Low Battery!] .. There is low battery capacity . Insert a fully charged battery. [Low Light!] .. When taking pictures in dark places . Take pictures in Flash Photography ...
Эта инструкция также подходит к моделям:Видеокамеры - NV8-B (6.26 mb)
Видеокамеры - NV8-BM (6.26 mb)
Видеокамеры - NV8-S (6.26 mb)