Оценок - 2, средний балл: 3.5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
To set a bracketing option, In Shooting mode, press [m] >3 > BKT Set > an option. Vivid Retro Standard Option Description AE BKT Set Set the order and the area of bracket. • BKT Order: Set the order in which the camera takes the original, lighter, and darker shot (represented by 0, +, and -). • BKT Area: Set the exposure range of the 3 AE BKT shots. WB BKT Set Adjust the white balance interval range of the 3 WB BKT shots. For example, AB-/+3 adjusts the Amber value plus or minus three steps. MG-/+3 adjusts the Magenta value the same amount. P Wiz BKT Set Select 3 Picture Wizard settings the camera uses to take the 3 P Wiz BKT shots. Shooting Functions FlashShooting Functions Flash In order to take a realistic photo of a subject, the amount of light should be constant. When the light source varies, you can use an optional flash and supply a constant amount of light. Select appropriate settings according to a light source and a subject. To set flash options, In Shooting mode, press [m] > 2>Flash > an option. Flash options Option Description Off: Do not use the flash. Smart Flash: The camera automatically adjusts the brightness of the flash according to the amount of light in the surrounding environment. Auto: The flash automatically fires in dark places. Auto + Red: The flash automatically fires and prevents red-eyes. Fill in: The flash fires whenever you take a photo. Fill-in Red: The flash fires whenever you take a photo and prevents red-eyes. Option Description 1st Curtain: The flash fires immediately after the shutter opens. The camera captures a photo of a subject earlier in an action sequence clearly. Ball moving direction 2nd Curtain: The flash fires just before the shutter closes. The camera captures a photo of a subject later in an action sequence clearly. Ball moving direction • The options may differ depending on the shooting mode. • There is an interval between two bursts of the flash. Do not move until the flash fires a second time. • You can use the flash and adjust the amount of light only when you use the NX exclusive external flash. Use only Samsung-approved flashes. Using incompatible flashes may damage your camera. Shooting Functions > Flash Shooting Functions > Flash Correct the red-eye effect Adjust the flash intensity If the flash fires when you take a photo of a person in the dark, a red Adjust the flash intensity to avoid overexposure or underexposure. You glow may appear in the eyes. To prevent this, select Fill-in Red. can adjust it by ± 2 levels. Press [f] to set the intensity. To set the flash intensity, In Shooting mode, press [m] > 2 > Flash > an option >[f]. To set the flash intensity, Flash Exposure Value Back Reset Without red-eye correction With red-eye correction Shooting Functions Metering Shooting Functions Metering The metering mode refers to the way in which a camera measures the quantity of light. The camera measures the amount of light in a scene, and in many of its modes, uses the measurement to adjust various settings. For example, if a subject looks darker than its actual color, the camera takes an overexposed photo of it. If a subject looks lighter than its actual color, the camera takes an underexposed photo of it. The brightness and overall mood of the photo can also be affected by how the camera measures the amount of light. Select an appropriate setting for a shooting condition. To set a metering option, In Shooting mode, press [f] >Metering > an option. Spot The Spot mode calculates the amount of light in the center. When you take a photo in conditions where there is a strong backlight behind a subject, the camera adjusts the exposure so as to shoot a subject correctly. For example, when you select the Multi mode in a strong backlight condition, the camera calculates that the overall amount of light is abundant, which results in a darker photo. The Spot mode can prevent this situation as it calculates the amount of light in a designated area. The subject is in bright color while the background is dark. The Spot mode is recommended for a situation like this where a huge difference in the exposure exists between a subject and a background. Link AE to AF Point When this function is turned on, the camera automatically sets an optimal exposure by calculating the brightness of the focus area. This function is only available when you select either Spot metering or Multi metering, and Selection AF. To set this function, In Shooting mode, press [m] >3 > Link AE to AF Point >an option. Shooting Functions > Metering Shooting Functions > Metering Center-weighted The Center-weighted mode calculates a broader area than the Spot mode does. It sums up the amount of light in the center portion of the shot (60 ~ 80%) and that of the rest of the shot (20 ~ 40%). It is recommended for situations where there is a slight difference in brightness between a subject and a background or an area of the subject is large compared to the overall composition of the photo. Multi The Multi mo...