Оценок - 1, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Attach a charged battery pack to the camcorder (p. 7). . Connect the plug of the AC Adaptor to the wall outlet (wall socket) (p. 7). The camcorder does not operate even when the power is set to on. . It takes a few seconds for your camcorder to be ready to shoot after the power is turned on. This is not a malfunction. . Disconnect the AC Adaptor from the wall outlet (wall socket) or remove the battery pack, then reconnect it after about 1 minute. If the functions still do not work, press the RESET button (p. 15) using a sharp-pointed object. (If you press the RESET button, all settings, including the clock setting, are reset.) . The temperature of your camcorder is extremely high. Turn off your camcorder and leave it for a while in a cool place. . The temperature of your camcorder is extremely low. Turn off the camcorder and take it to a warm place. Leave the camcorder there for a while, then turn on the camcorder. Your camcorder gets warm. . This is because the power has been turned on for a long time. This is not a malfunction. The power abruptly turns off. . Use the AC Adaptor. . Turn on the power again. . Charge the battery pack (p. 7). Pressing START/STOP or PHOTO does not record images. . Set the POWER switch to (Movie) or (Still) (p. 9). . You cannot record images in sleep mode. Press the QUICK ON button. . Your camcorder is recording the image you have just shot on the media. You cannot make new recording during this period. . The media of the camcorder is full. Delete unnecessary images (p. 22). . Total number of movies or still images exceeds the recordable capacity of the media. Delete unnecessary images (p. 22). The recording stops. . The temperature of your camcorder is extremely high/low. Turn off your camcorder and leave it for a while in a cool/warm place. You cannot install “Picture Motion Browser.” . Check the computer environment required to install “Picture Motion Browser.” . Install “Picture Motion Browser” in an orderly manner (p. 23). “Picture Motion Browser” does not work correctly. . Quit “Picture Motion Browser” and restart your computer. Your camcorder is not recognized by the computer. . Disconnect devices from the USB jack of the computer other than the keyboard, mouse, and your camcorder. . Disconnect the USB cable from the computer and the Handycam Station, and restart the computer, then connect the computer and your camcorder again in an orderly manner. Self-diagnosis display/Warning indicators If indicators appear on the LCD screen, check the following. If the problem persists even after you have tried a couple of times, contact your Sony dealer or local authorized Sony service facility. Indicators/Messages Causes/Soiutions C:04:.. . The battery pack is not an “InfoLITHIUM” battery pack (H series). Use an “InfoLITHIUM” battery pack (H series) (p. 7). . Connect the DC plug of the AC Adaptor to the DC IN jack of the Handycam Station or your camcorder securely (p. 7). C:13:../ . Remove the power C:32:.. source. Reconnect it and operate your camcorder again. Indicators/Messages Causes/Soiutions E:20:../ . A malfunction that E:31:../ you cannot service has E:61:../ occurred. Contact your E:62:../ Sony dealer or local E:91:../ authorized Sony service E:94:.. facility. Inform them of the 5-digit code, which starts from “E.” 101-0001 . The file is damaged or unreadable. . An error may have occurred with the hard disk drive in your camcorder. . Delete unnecessary images. .. Battery power is low. . The temperature of your camcorder is getting higher or extremely high. Turn off your camcorder and leave it for a while in a cool place. . The temperature of your camcorder is extremely low. Make the camcorder warm. . When the indicator flashes slowly, free space for recording images are running out. . No “Memory Stick PRO Duo” is inserted (p. 10). . When the indicator flashes quickly, there are not enough free space for recording images. Delete unnecessary images, or format the “Memory Stick PRO Duo” after storing the images on other media (p. 21). . The Image Database File is damaged. Troubleshooting Indicators/Messages Causes/Soiutions . The “Memory Stick PRO Duo” is damaged. Format the “Memory Stick PRO Duo” with your camcorder. . An incompatible “Memory Stick PRO Duo” is inserted. .. Access to the “Memory Stick PRO Duo” was restricted on another device. . There is something wrong with the flash. . The amount of light is not sufficient, so camera-shake easily occurs. Use the flash. . The camcorder is unsteady, so camera- shake easily occurs. Hold the camcorder steady with both hands and record the image. However, note that the camera-shake warning indicator does not disappear. . Media capacity is full. . Still images cannot be recorded during processing. Wait for a while, then record. . Drop sensor activated. Recording/playback may be disabled. Additional Information Precautions On use and care . Do not use or store the camcorder and accessories in the following locations: . Anywhere ex...
Эта инструкция также подходит к моделям:Видеокамеры - DCR-SR220E (4.17 mb)