Оценок - 2, средний балл: 4
(
)
)
|
Фото и характеристики Sony HDR-FX1000E |
К этому устройству также есть другие инструкции:
Фрагмент инструкции
You can assign a single function to any one of the ASSIGN 1 to 6 buttons. Functions you can assign to the ASSIGN buttons The buttons in parentheses indicate that the functions are assigned to the buttons by default. •EXP.FOCUS (p. 79) •D.EXTENDER (p. 66) •RING ROTATE (p. 63) •AE SHIFT (p. 64) (ASSIGN 2 button) •INDEX MARK (p. 42) •STEADYSHOT (p. 65) •BACK LIGHT (p. 65) •SPOTLIGHT (p. 65) •FADER (p. 66) •SMTH SLW REC (p. 66) •COLOR BAR (p. 69) •REC REVIEW (p. 42) (ASSIGN 3 button) •END SEARCH (p. 42) •ZEBRA (p. 71) (ASSIGN 1 button) •MARKER (p. 72) •PEAKING (p. 71) •Picture profile (p. 34) •SHOT TRANSITION (p. 43) ASSIGN 4-6 buttonsASSIGN 1-3 buttons 1Press the MENU button B. 2Select the (OTHERS) t [ASSIGN BTN] with the SEL/PUSH EXEC dial A. 3Select the ASSIGN button to which you want to assign a function from [ASSIGN1] to [ASSIGN6] with the SEL/PUSH EXEC dial A. •[------] appears if no function is assigned to the ASSIGN button. •Select [YES] when you select [SHOT TRANSITION], then do step 6. 4Select the function that you want to assign with the SEL/PUSH EXEC dial A. 5Select [OK] with the SEL/PUSH EXEC dial A. 6Press the MENU button B to hide the menu screen. zTips •Shot transition is assigned to the ASSIGN 4, 5 and 6 buttons (p. 43). Cancel the shot transition assignment to return to the pre-setting assignment. •To cancel the shot transition, select [SHOT TRANSITION] t [YES] in step 3. Recording an index signal If you record a scene with an index signal, you can easily find that scene during play back (p. 52). The index function will make it easier to check the transition of recording or edit your pictures using index signals. 1Assign [INDEX MARK] to one of the ASSIGN buttons (p. 41). 2Press the ASSIGN button to which [INDEX MARK] is assigned. During recording appears for about 7 seconds and an index signal is recorded. During standby flashes. After you press the REC START/STOP button to start recording, appears for about 7 seconds and an index signal is recorded. To cancel the operation Press the ASSIGN button to which [INDEX MARK] is assigned again before you start recording. bNotes •You cannot record an index signal on a recorded tape afterward. Reviewing the most recently recorded scenes (Rec review) You can view about 2 seconds of the scene recorded just before you stopped the tape. This is convenient during playback of the latest scene check. 1Assign [REC REVIEW] to one of the ASSIGN buttons. (p. 41). 2Press the ASSIGN button to which [REC REVIEW] is assigned during standby. The last 2 seconds (approx.) of the most recently recorded scene will be played back, then your camcorder returns to standby. Searching for the last scene of the most recent recording (End search) 1Assign [END SEARCH] to one of the ASSIGN buttons (p. 41). 2Press the ASSIGN button to which [END SEARCH] is assigned. The last scene of the most recent recording will be played back for about 5 seconds, and the camcorder goes the standby at the point where the last recording has finished. bNotes •End search will not work once you eject the tape. •End search will not work correctly if a blank section exists between recorded sections on the tape. Using the Shot transition You can store settings of focus, zoom, iris, gain, shutter speed and white balance, and smoothly shift from the current settings to the stored settings (shot transition). For example, you can shift the focus from closer objects to farther objects, or change the depth of field by adjusting the iris. You can also develop scenes under different conditions smoothly. If you store manually adjusted settings of white balance, you can smoothly shift from one scene to another under different conditions, such as from indoor to outdoor. Sony recommends that you use a tripod to avoid image blurring. SHOT-ASHOT-B You can set the transition curve and duration using [SHOT TRANSITION] (p. 68). ASSIGN 4-6 buttons 1Assign [SHOT TRANSITION] to the ASSIGN buttons (p. 41). zTips •Shot transition is assigned to ASSIGN 4, 5 and 6 buttons. 2Store the settings (shot) 1Press the ASSIGN 4 button repeatedly to bring up the SHOT TRANSITION STORE screen. SHOT TRANSITIONSTORESTBY0:00:0560minSHOT-ASHOT-BSTORE 2Adjust the desired items manually. See pages 28 to 34 for details on adjustment. 3Press the ASSIGN 5 button for storing the setting in SHOT-A, or the ASSIGN 6 button for storing the setting in SHOT-B. bNotes •The setting values assigned to SHOT-A and SHOT-B are deleted when the POWER switch is turned to OFF (CHG). 3Check the stored settings 1Press the ASSIGN 4 button repeatedly to bring up the SHOT TRANSITION CHECK screen. SHOT TRANSITIONCHECKSTBY0:00:0560minSHOT-ASHOT-BCHECK 2Press the ASSIGN 5 button to check the SHOT-A. Press the ASSIGN 6 button to check the SHOT-B. The selected setting will take effect on the picture on the screen. The focus, zoom, and so on, are automatically adjusted as stored in the setting. bNotes •On the shot transition check screen, the settings do not shift to the stor...