Оценок - 3, средний балл: 4.3
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
TRAIL Records a picture so that an incidental image like a trail is left. OLD MOVIE Adds an old movie effect with a sepia hue to pictures. • You cannot change to another digital effect while recording pictures on a tape with [CINEMA EFECT] selected. • You cannot record pictures edited using special effects on the tape in your camcorder. • You cannot add effects to externally input pictures. The playback pictures edited with digital effects are output via the HDV/DV Interface (i.LINK) jack without effect control. • You can save pictures edited using special effects on a “Memory Stick Duo” (p. 67) or record them on another tape (p. 62). PICT. EFFECT (Picture effect) You can add special effects to a picture during recording or playback. appears. . OFF Does not use [PICT. EFFECT] setting. SKINTONE Makes skin texture look more smoother and more appealing. NEG.ART The color and brightness are reversed. SEPIA Pictures appear in sepia. B&W Pictures appear in black and white. SOLARIZE Pictures appear as an illustration with strong contrast. PASTEL Pictures appear as a pale pastel drawing.* MOSAIC Pictures appear mosaic-patterned.* * Available during recording only. • While using the back light function, you cannot select [SKINTONE]. And when you use the back light function with [PICT.EFFECT] set to [SKINTONE], the [SKINTONE] setting will be canceled. • You cannot add effects to externally input pictures. The playback pictures edited with picture effects are output via the HDV/DV Interface (i.LINK) jack without effect control. • You can also record pictures edited using special effects on another tape (p. 62). SLIDE SHOW Plays back the images stored on a “Memory Stick Duo,” or in a folder in sequence (slide show). . Touch .[PB FOLDER]. . Select [ALL FILES ()] or [CURRNT FOLDER ()], then touch . If you select [CURRNT FOLDER ()], all the images in the current playback folder selected in [PB FOLDER] (p. 49) are played back in sequence. . Touch [REPEAT]. . Select [ON] or [OFF], then . To repeat the slide show, select [ON] (). To execute the slide show only once, select [OFF]. . Touch [END].[START]. To cancel [SLIDE SHOW], touch [END]. To pause, touch [PAUSE]. • You can select the first picture for the slide show with / before touching [START]. Continued . INT.REC-STL (Interval photo recording) You can record still images on the “Memory Stick Duo” at a selected interval. This function is useful to observe the movement of clouds or the changes in daylight, etc. [a]: Recording [b]: Interval . Touch . a desired interval time (1, 5 or 10 minutes) . . [ON] . . . . Press PHOTO fully. stops flashing and the interval still image recording starts. To cancel [INT.REC-STL], select [OFF] in step .. SHOT TRANS You can register the settings of focus and zoom and then change the recording setting from the current one to the registered one, resulting in a smooth transition of scenes (Shot transition). SHOT ASHOT B STORE Set the zoom (p. 24) and focus (p. 25) at the desirable setting and press [STORE- A]. [SHOT-A] flashes and will be registered. Register [STORE-B] as well. EXEC Touch [NEXT].[EXEC-A] or [EXEC- B] and the recording setting changes to the registered one. Touch [BACK] to register again or touch [END] to finish the operation. • You cannot register the setting while recording. • It takes about 4 seconds to change to the registered setting. • If you register [SHOT TRANS], the [WHITE BAL.] setting is also registered at the same time. • The recording angle varies during [SHOT TRANS]. • Use the tripod because [STEADYSHOT] does not function. DEMO MODE The default setting is [ON], allowing you to view the demonstration in about 10 minutes, after you have removed both a cassette and a “Memory Stick Duo” from your camcorder, and slide the POWER switch down to turn on the CAMERA- TAPE lamp. • The demonstration will be suspended in situations such as those described below. – When you touch the screen during the demonstration. (The demonstration starts again in about 10 minutes.) – When a cassette or a “Memory Stick Duo” is inserted. – When the POWER switch is set to other than CAMERA-TAPE. PictBridge PRINT See page 69. PICT.APPLI. menu (Continued) EDIT/PLAY menuSettings for editing or playing back in various modes (VAR.SPD PB/END SEARCH, etc.) The default settings are marked with .. The indicators in parentheses appear when the items are selected. See page 38 for details on selecting menu items. VAR.SPD PB (Various speed playback) You can play back in various modes while viewing movies. . Touch the following buttons during playback. To Touch change the playback direction* (frame) play back slowly** To reverse direction : (frame) . play back frame by frame (frame) during playback pause. To reverse direction: (frame) during frame playback. * Horizontal lines may appear at the top, bottom, or in the center of the screen. This is not a malfunction. **Pictures output from the HDV/DV Interface (i.LINK) jack cannot be played back smoothly in sl...