Оценок - 5, средний балл: 4.4
(
)
)
|
Фото и характеристики Sony CCD-TRV238E |
К этому устройству также есть другие инструкции:
Фрагмент инструкции
The selected item appears on the screen. 2 Turn the SEL/PUSH EXEC dial to select the desired item, then press the dial. 3 Repeat steps 1 and 2 until the title is laid out as desired. 4 Turn the SEL/PUSH EXEC dial to select [OK], then press the dial. The title lights up. EASY DUBBING 0 :0 0 :0 0 START_ I TITLE SEL I ON MODE SEL SETUP HELLO! NORMAL [ E A SY D UB ] : E N D b Notes • You can put a title only into the tape of the VCR. • If you set the background color to [FADE], the picture may not appear properly, depending on the connected VCR. Z Tips • The title color changes as follows: [WHITE] y [YELLOW] y [VIOLET] y [RED] y [CYAN] y [GREEN] y [BLUE] • The title size changes as follows: [SMALL] y [LARGE] ,continued Dubbing/Editing 65 Dubbing/Editing The background color changes as follows: [FADE] y [WHITE] y [YELLOW] y [VIOLET] y [RED] y [CYAN] y [GREEN] y [BLUE] y [BLACK] Step 4: Performing Easy Dubbing Step 3: Selecting the dubbing mode You can choose either normal recording ([NORMAL]) or interval recording ([PREVIEW]). 1 Turn the SEL/PUSH EXEC dial to select [MODE SEL], then press the dial. Make sure that your camcorder and VCR are connected, and that the VCR is set to recording pause. 1 Turn the SEL/PUSH EXEC dial to select [START], then press the dial. EASY DUBBING 0 :0 0 :0 0 I START ^RETURN 1 TITLE SEL MODE SEL SETUP EXECUTE Engage ec pause. NORMAL [EASY DUB]:END EASY DUBBING 0 :0 START TITLE SEL I MODE SEL klNORMA~L SETUP PREVIEW HELLO! [EASY DUB]:END 2 Turn the SEL/PUSH EXEC dial to select [NORMAL] or [PREVIEW], then press the dial. When you select [NORMAL] You can record into the VCR normally. When you select [PREVIEW] You can make a time-lapse dubbing by setting the VCR to automatically repeat 5 seconds’ recording and 25 seconds’ standby. [a] [b] [c] 5 s 25 s 30 s 5 s 25 s 30 s 2 Turn the SEL/PUSH EXEC dial to select [EXECUTE], then press the dial. When dubbing ends, your camcorder and VCR stop automatically. Then the display returns to the Easy Dubbing initial screen. To stop dubbing during editing Press (Ti~j) (stop) on your camcorder. To quit Easy Dubbing Press EASY DUB. b Note • [NOT READY] appears on the screen when [START] is not carried out. NORMAL a. Recording time (VCR) b. Waiting time (VCR) c. Playback time (camcorder) 66 Dubbing/Editing Recording pictures from a VCR ( TRV285E) You can record and edit pictures from a VCR on a tape inserted in your camcorder. Insert a cassette for recording in your camcorder. 1 Connect your VCR to your camcorder (p. 61). Use an i.LINK cable (optional) for connection. 2 Slide the POWER switch repeatedly to select the PLAY/EDIT mode. 3 Press CO (rec) and the button on its right simultaneously on your camcorder, then immediately press (TH^) (pause) on your camcorder. 4 Start playing the cassette on your VCR. The picture played on the connected device appears on the LCD screen of your camcorder. 5 Press QQ) (pause) at the point you want to start recording. 6 Press CO (stop) to stop recording. Z Tip * DVin appears when you connect your camcorder and other devices via an i.LINK cable. (This indicator may also appear on your TV.) Dubbing selected scenes from a tape - Digital program editing ( TRV270E/285E) You can select up to 20 scenes (programs) and record them in the desired order to other recording device such as VCR. Delete unwantec scene m2 ¿¡1^ % Change the order j-j Results of editing Step 1: Preparing your camcorder and VCR for operation Follow the steps below when you are performing digital program editing for the first time to a tape in a VCR. You can skip this setting if you have set up the VCR by the following procedure before. b Notes * You cannot perform the Digital program editing on the following devices: - a VCR that does not support [IR SETUP] codes - a DVD recorder, a DVD recorder equipped with an HDD, etc * When your camcorder is connected to the VCR via the DV Interface, you cannot record the title or indicators. Connect your VCR to the camcorder as a recording device (p. 61). Y ou can use either the A/V connecting cable or the i.LINK cable to make the connection. The dubbing procedure is easier with the i.LINK connection. ►continued 1 Dubbing/Editing 67 Dubbing/Editing 2 Prepare your VCR. • Insert a cassette for recording. • Set the input selector to input mode, if your VCR has one. 3 Prepare your camcorder (playing device). • Insert a cassette for editing. • Slide the POWER switch repeatedly to select the PLAY/EDIT mode. 4 Press MENU. 5 Turn the SEL/PUSH EXEC dial to select (OTHERS), then press the dial. 6 Turn the SEL/PUSH EXEC dial to select [VIDEO EDIT], then press the dial. VIDEO EDIT 0:08:55:06 I MARK I 1 IN UNDO ERASE ALL START EDIT SET TOTAL 0:00:00:00 SCENE 0 r mspmwnmwmm [MENU : END 7 Turn the SEL/PUSH EXEC dial to select [EDIT SET], then press the dial. VIDEO EDIT 0:08:55:06 EDIT SET I CONTROL ~l IR ...
Эта инструкция также подходит к моделям:Видеокамеры - CCD-TRV438E (2.9 mb)
Видеокамеры - DCR-TRV270E (2.9 mb)
Видеокамеры - DCR-TRV285E (2.9 mb)