Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
24. ZERO RETURN button -Used to stop the tape when the counter reaches "00:00:00". 25. INPUT SELECT button -Switches the program for viewing between the VCR and external input sources. 26. CALL button -Displays the present time/day of the week, channel, counter, speed selection and VCR mode on the TV screen. 27. SPEED (SP/SLP) selector button -Sets the tape speed for recording. 28. AUDIO/VIDEO OUT Jacks -Use to output audio and video signal to a TV, amplifier or VCR. 29. UHF/VHF IN (ANT) Jack - Connect a UHF/VHF antenna or CATV cable to this jack. 30. UHF/VHF OUT (TV) Jack -Use to output UHF/VHF or CATV signal to a TV. 31. AC Power Cord -Connect to a 120V 60Hz outlet. FLUORESCENT DISPLAY One-touch Timer Recording Timer Record Tape In ATR (Auto Tracking) VCR PM Multi-Function Display 9 4E30401A E P08-13 9 17/04/2001, 14:26 BASIC CONNECTIONS If you are using an antenna system, follow the instructions. If you are a cable (CATV) subscriber,skip ahead to page 12 for the proper connections. ANTENNA TO VCR CONNECTION The VCR must be connected "between" the antenna and the TV. First, disconnect the antenna from the TV and connect it to the VCR. Then connect the VCR to the TV. Below are 3 common methods of connecting an antenna system to a VCR. Find the type of antenna system you are using and follow the connection diagram. 1 Combination VHF/UHF Antenna with 75 ohm Coaxial Cable OUT IN VCR 75 ohm Coaxial Cable Combination VHF/UHF Antenna with 300 ohm Twin Lead (Flat) Wire VCR 2 OUT IN 300 ohm Twin Lead (Flat) Wire Matching Transformer 300 ohm Input 75 ohm output (not supplied) 3 Separate VHF and UHF Antennas VCR OUT INVHF UHF 300 ohm Twin Lead (Flat) Wire 75 ohm Coaxial Cable Combiner 75/300 ohm Inputs 75 ohm output (not supplied) NOTE: If both VHF and UHF antennas have 300 ohm twin lead (flat) wires, use a combiner having two 300 ohm inputs and one 75 ohm output. NOTES: • A clear picture will not be obtained by the VCR unless the antenna signal is good. Connect the antenna to the VCR properly. • For better quality recording, an indoor antenna or a telescopic antenna is not recommended. The use of an outdoor type antenna is required. • If you are not sure about the connection, please refer to qualified service personnel. 10 4E30401A E P08-13 10 17/04/2001, 14:26 VCR TO TV CONNECTION After you have connected the antenna to the VCR, you must connect the VCR to the TV. Below are 3 common methods of connecting your VCR to a TV. Find the type of TV you are using and follow the connection diagram. This VCR has a single 75 ohm output for connection to a TV. If your TV has separate VHF and UHF antenna inputs (numbers 2 and 3 below), use a splitter to connect the VCR to the TV for VHF and UHF reception. ENGLISH IN OUT 75 ohm Coaxial Cable (supplied) IN 75 ohm Coaxial Cable OUT (supplied) IN 75 ohm Coaxial Cable (supplied) OUT Splitter 75 ohm Input 75/300 ohm outputs (not supplied) Splitter 75 ohm Input 300 ohm outputs (not supplied) TV VHF/UHF IN NOTE: If a VHF or UHF antenna is used, set the TV/CATV menu option to the "TV" mode. TV with single 75 ohm VHF/UHF antenna input NOTE: If a VHF or UHF antenna TV is used, set the TV/CATV UHF VHF menu option to the "TV" mode. TV with 300 ohm UHF and 75 ohm VHF antenna inputs TV UHF VHF NOTE: If a VHF or UHF antenna is used, set the TV/CATV menu option to the "TV" mode. TV with 300 ohm UHF and 300 ohm VHF antenna inputs 11 4E30401A E P08-13 11 17/04/2001, 14:26 CATV (CABLE TV) CONNECTIONS Many cable companies offer services permitting reception of extra channels including pay or subscription channels. This VCR has an extended tuning range and can be tuned to most cable channels without using a cable company supplied converter box, except for those channels which are intentionally scrambled. If you subscribe to a special channel which is scrambled, you must have a descrambler box for proper reception. ALLOWS: * Recording of nonscrambled channels. * Use of the programmable timer. * Recording of one channel while watching another. ALLOWS: * Recording of channels through the converter box (scrambled and unscrambled). * Using the programmable timer to record only the channel selected at the converter box. PREVENTS: * Recording one channel while watching another. * Using the VCR tuner to select channels. 1 2 OUT INUHF/VHF VHF/UHF IN (ANT) VCR Incoming Cable TV OUT INUHF/VHF VHF/UHF IN (ANT) VCR Converter/ Descrambler Incoming Cable TV OUT INUHF/VHF VHF/UHF IN (ANT) VCR Incoming Cable Converter/Descrambler TV 3 ALLOWS: * Recording of nonscrambled channels. * Use of the programmable timer. * Recording an unscrambled channel while watching any channel selected at the converter box. PREVENTS: Recording scrambled channels. To record from converter/descrambler, VCR tuner must be tuned to the converter output channel, usually channel 3 or 4. If you are playing a tape or using the tuner built into the VCR, the converter must be set to the video channel output of the VCR (either 3 or 4). NOTE: NOTE:...
Эта инструкция также подходит к моделям:Видеокамеры - MVR041 (438.97 kb)
Видеокамеры - MVR2041 (438.97 kb)