Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
2 Press TAPE SPEED to select the tape speed, SP, LP or SLP. SLP provides three as much recording time as SP, LP provides twice as much recording time as SP, although SP produces better picture and audio sounds. 3 Press CHANNEL Nor Mrepeatedly, or the number buttons to select the channel number to record. To select CATV broadcast using the number buttons Set the TV VCR/CATV selector to CATV. When selecting the number between 10 and 19, press 0 once to enter the hundreds digit, and then press the buttons 1 through 9 to enter tens and ones digits. When selecting the numbers less than 10, press 0 twice to enter the hundreds and tens digits, and then press the buttons 1 through 9 to enter the ones digit. To select VHF/UHF broadcast using the number buttons When selecting the numbers less than 10, press 0 to enter the tens digits, and then press the buttons 1 through 9 to enter the ones digit. 4 Press wREC/OTR to start recording. •“INDEX”flashes for a few seconds. •The wREC/OTR button on the unit lights. To stop recording Press sSTOP on the remote control or ZSTOP/ EJECT on the unit. The wREC/OTR button on the unit lights off. To pause recording Press aPAUSE/STILL. The wREC/OTR button on the unit flashes. To resume recording, press aPAUSE/STILL or wREC/ OTR. To prevent an accidental recording Break off the erasure prevention tab on the back edge of the cassette. To record over the tape again, cover the gap with adhesive tape. Adhesive tape Erasure prevention tab Tip If you want to record the program through the line input, press CHANNEL Nor M, or TV/LINE to display “LINE1”(from the AUDIO/VIDEO IN jacks on the rear) or “LINE2”(from the AUDIO/VIDEO IN jacks on the front) in step 3. Notes •The channel cannot be changed during recording. •If you try to record on a cassette without its erasure prevention tab, the unit will eject the cassette. •If recording pause lasts for more than 5 minutes, the unit will automatically enter stop mode to protect the tape. •If the power is turned off during recording, the TV turns off, but the VCR continues to record. 23 ENGLISH Playing back the portion you just recorded – One-Touch Playback Playing back the portion you just recorded – One-Touch Playback Using One-Touch Playback after VCR Plus+® system (page 25) or manual timer recording (page 27) is convenient. You can make timer recordings and play back only the portion you just recorded with the timer by pressing a single button later. OTPB VX-S207 ONE-TOUCH PLAYBACK 1 Stop recording (when recording without timer). The ONE-TOUCH PLAYBACK button on the unit lights. If another operation button is pressed after you stop recording, One-Touch Playback will be canceled and the ONE-TOUCH PLAYBACK button on the unit lights off. 2 Press ONE-TOUCH PLAYBACK on the unit or OTPB on the remote control. The tape rewinds to the start of the recorded portion and begins playback. When you set the timer for more than two timer programs The unit starts playing back from the earliest one when you use One-Touch Playback. To find the beginning of the second (or later) program, use Index Search. Note One-Touch Playback does not work for recordings of less than 1 minute. Recording with One-Touch Recording You can immediately start recording the current channel for a specified time with One-Touch Recording. wREC/OTR sSTOP VX-S207 wREC/OTR TIMER REC indicator Z STOP/EJECT Before starting •Insert a cassette with its erasure prevention tab in place. Make sure the tape is longer than the recording time. •Select the channel to record and tape speed. 1 Press wREC/OTR. The unit starts recording. •“INDEX”flashes for a few seconds. •The wREC/OTR button on the unit lights. 2 Press wREC/OTR repeatedly to set the recording duration. Each press changes the recording duration on the screen in the following way: 0:30 1:00 1:30 2:00 3:00 normal recording 5:00 4:00 After the set amount of time has elapsed, the recording stops. ENGLISH 24 Playing back a tape (continued) To stop recording Press sSTOP on the remote control or ZSTOP/ EJECT on the unit. The wREC/OTR button on the unit lights off. To extend the recording duration while recording Press wREC/OTR until the new duration you want appears on the screen. Tip To confirm the remaining time of recording, press CALL during One-Touch Recording. Notes • If the power is turned off during One-Touch Recording, the TV turns off, but the VCR continues to record. • During One-Touch Recording, when the tape reaches the end, the TIMER REC indicator on the unit flashes. Setting the timer with VCR Plus+® system You can greatly simplify timer recordings with VCR Plus+® system. Just enter the PlusCode number, a number assigned to each TV program, and the unit will set the timer recording automatically. You can find PlusCode number in most TV guide magazines. You can set up to 8 programs. TV VCR/CATV VCR PLUS+ Number buttons T-REC MENU ENTER CANCEL SET/TRACKING +/– VX-S207 TIMER REC indicator Before starting • Check that the clock is set ...
Эта инструкция также подходит к моделям:Видеокамеры - VX-S207U (1.77 mb)