Оценок - 6, средний балл: 4.2
(
)
)
|
Фрагмент инструкции
Parts and their functions 3 Camera selector switches [CAMERA] These are used to select one camera and one CCU as the pair which is to be controlled by the MSU. A camera is selected by pressing the camera selector switch with the same number as the camera to be selected (its lamp will light). The selection is released by pressing the camera selector switch of the selected camera (its lamp will turn off). When a camera selector switch is pressed, the MSU settings (such as the switch lamp lighting and selection) are performed using the information on the settings for the camera concerned. The details of the functions given below apply when one or more camera selector switches have been selected. 4 MODE ON/OFF switches These switches are for setting the camera operation modes. The modes corresponding to the switches with the lighted lamps are selected. 5600K switch [5600K MODE] This is used to change the amplification rate of the GBR signals by an electrical circuit to achieve the white balance that corresponds to the color temperature of 5600K. When it is pressed, the B video signal is attenuated by approximately -6 dB, the R video signal is boosted by approximately 3 dB, and the G video signal is not attenuated. Select this switch when shooting under a 5600K light source or shooting outdoors. Lighted: 5600K Off: 3200K Flare switch [FLARE OFF MODE] This is used to cancel the flare correction function (which suppresses the rise of the pedestal in proportion to the light quantity). Lighted: Flare correction OFF (flare correction function is canceled) Off: Flare correction function is valid. Black gamma ON switch [BLACK GAMMA ON MODE] This is used to enable the black gamma function (which changes the video signal amplification rate in parts where the light quantity is low). Lighted: Black gamma ON (black gamma function is valid) Off: Black gamma function is canceled. Gamma OFF switch [GAMMA OFF MODE] This is used to cancel the gamma correction function (which provides the signal level of the video signals with the reverse characteristics matching the TV video signal input and light-emitting level characteristics). Lighted: Gamma correction OFF (gamma correction function is canceled) Off: Gamma correction function is valid. Knee OFF switch [KNEE OFF MODE] This is used to cancel the knee function that attenuates those parts of the video signals where a particular level (knee point) has been exceeded so that they will not become saturated as easily. Lighted: Knee OFF (knee function is canceled) Off: Knee function is valid. White clip OFF switch [WHITE CLIP OFF MODE] This is used to cancel the white clip function by which the video signal output is clipped (saturated). Lighted: White clip OFF (white clip OFF function is valid) Off: White clip ON Matrix ON switch [MATRIX ON MODE] This is used to enable the matrix function by which the chroma saturation is compensated for the G (green), B (blue), R (red), Ye (yellow), Cy (cyan) and Mg (magenta) signals and by which the chroma saturation and hue are compensated for the I (skin tone) signals. Lighted: Matrix ON (color correction function is valid) Off: Matrix OFF PM character display switch [CHARACTER] This is used to set the characters to be displayed on the PM to ON or OFF. HDTV detail OFF switch [HD.DTL OFF MODE] This is used to cancel the detail enhancer function that enhances (adjusts the relative hardness/softness of) the picture quality in the detailed parts of the HDTV video output. Lighted: Detail enhancer OFF (function for enhancing picture quality in detailed parts canceled) Off: Detail enhancer ON SDTV detail OFF switch [SD.DTL OFF MODE] This is used to cancel the detail enhancer function that enhances (adjusts the relative hardness/softness of) the picture quality in the detailed parts of the SDTV video output. Lighted: Detail enhancer OFF (function for enhancing picture quality in detailed parts canceled) Off: Detail enhancer ON HDTV skin tone detail ON switch [HD SKIN ON MODE] This is used to suppress the detail in the skin color parts of the HDTV video output. SDTV skin tone detail ON switch [SD SKIN ON MODE] This is used to suppress the detail in the skin color parts of the SDTV video output. Parts and their functions 5 EL display When the control item selector switches are selected, the corresponding adjustment items and adjustment values appear on the EL display. Example of EL display