• The underlined items can only be selected by as one whole page (with all sub-items). Individual sub-items cannot be selected separately. About Menu Description Tables Items/ Data Saved AdjustableRange Remarks SCAN REVERSE OFF ON This setting is for correcting an image which has been inverted by a film-use lens or anamorphic lens attached to the unit. SC U F R abc a. The following letters indicate whether the modified menu data is saved to or read out from the memory. The – indicates that the data cannot be saved or read. S = Can be saved and read as scene file data. C = Can be saved or read using SD CARD READ/WRITE. U = Can be saved and read as user data. Please refer to [SCENE] (page 203) and [INITIALIZE] (page 203). F = Can be read using READ FACTORY DATA. Please refer to [INITIALIZE] (page 203). R = Can set whether or not to store changes using the RC DATA SAVE menu option. Please refer to [Connection of the remote control unit (AJRC10G)] (page 123). b. This section shows the adjustable range of the set value, and available options for this item. c. About the settings available for this item. Menu: Menu Configuration USER MENU:USER MENU is factory-set. The menu can be configured to suit your preferences by specifying each option according to your purposes and frequency of use, through the screen, which is accessible from the MAIN MENU page. For more information, see [Selecting Options for USER MENU] (page 169). To display USER MENU, press the MENU button. MAIN MENU: Allows you to set all options on the settings menu. This menu has a category-by-category structure, layered according to purposes and frequency of use. To display MAIN MENU, press the MENU button for 3 seconds or longer. SYSTEM SETTING: This option is used to specify recording signal, recording system, etc. PAINT: This option is used to fine-adjust images while monitoring the output waveform of the camera, using the waveform monitor. Normally, this adjustment requires assistance from a video engineer. This option may be performed by an external remote control. However, it is valid when the unit is used as a stand-alone device. VF: Used to select the information items to be displayed in the viewfinder screen. CAM OPERATION: Used to change settings according to the conditions for the subject. MAIN OPERATION: Used to specify recording-related items, such as audio settings, time code, battery and P2 card remaining amounts. FILE: Used to specify file-related items such as SD memory card reading/writing and lens file settings. MAINTENANCE: Used to specify maintenance-related items. USER MENU SELECT: Used to edit USER MENU. OPTION MENU: Provides options which may be needed if functions are added in the future. To display OPTION MENU, hold down the LIGHT button and press the MENU button. acd b a. LIGHT button b. Jog dial button c. MENU button d. SHOT MARKER/MENU CANCEL button Menu Menu: Menu Configuration Setting Menu Options Setting Menu Options The menu options are set with the MENU and jog dial buttons. The menu comprises main menu, sub-menus and options menus. The data specified through menu options are written and saved in the internal memory of the unit. This section describes how to set options in MAIN MENU. The other menus can be configured in the same manner (the method of displaying the menu screen depends on the particular menu). .. Note When the unit is in thumbnail mode, the viewfinder displays “THUMBNAIL OPEN”, disabling navigation through the menu. 1 Press the MENU button for 3 seconds or longer. The MAIN MENU screen appears, together with its options. .................... ............... ...... ... .............. ............... ..... ............ ................. 2 Turn the jog dial button to move the mark (..) to a desired menu option. Then, press the jog dial button to display the sub-menu screen. ................... ............... ...... ... ............... ............... ..... ............ ................. 3 Turn the jog dial button to move the mark (..) to a desired menu option. Then, press the jog dial button to display the options screen. ................. .......... .............. ............... ......... ........ ................... .......... 4 Turn the jog dial button to move the mark (..) to a desired option. Then, press the jog dial button. The value starts blinking. ........... ...................... ....................... ........................ ......................... ........................... ........... ........... 5 Turn the jog dial button to change the value. To increase the value: Turn the jog dial button clockwise, as seen from the front of the camera. To decrease the value: Turn the jog dial button anti-clockwise, as seen from the front of the camera. Each turn of the dial switches the value by one step. A quick turn changes the value rapidly; a slow turn makes a fine adjustment. To turn an option on or off: To select “ON”, turn the jog dial button clockwise, ...
)
Войти: