Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT MAKE ANY MODIFICATIONS. DO NOT REPAIR BY YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. CAUTION: TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, REFER INSTALLATION OF HARDDISK DRIVE TO QUALIFIED SERVICE PERSONNEL. HARD-DISK DRIVE MUST BE APPROVED BY UL AND/OR CSA. Il il is the safety information. Contents Features..............................................4 Warning...............................................4 System Configuration...................................5 Parts and Their Functions.......... .....................6 Front Panel...........................................6 LED Display Panel.....................................7 Rear Panel...........................................8 Connections..........................................12 Basic Connections....................................12 Monitor Connections...................................13 VTR Connections.....................................14 Audio Equipment Connections...........................15 System Startup and Exit................................16 System Startup..............;.........................16 System Exit..........................................17 Troubleshooting.......................................19 Connector Signals.....................................27 Error Items...........................................29 When the AUTO OFF lamp is lighted......................29 When the WARNING lamp is lighted......................30 Maintenance and Care..................................31 Video Head Cleaning..................................31 Condensation.........................................31 Specifications.........................................32 • Windows and Windows NT are registered trademarks of Microsoft Corporation. • Pentium is a registered trademark of Intel Corporation. • Adaptec, AHA and SCSISelect are registered trademarks of Adaptec Inc. All other names of companies and products are the trademarks or registered trademarks of the companies concerned. -3- Features All-in-one tower design This is the first non-linear editor to incorporate a VTR for uploading and downloading applications. This feature translates into savings in terms of both the cost and space required for an externally connected VTR, and it enables DVCPRO tapes to be loaded just like floppy disks or magneto-optical disks. The unit also contains a hard disk for audio-video recording, and its size is the same as a tower-type personal computer. It can be placed by the side of a desk for highly efficient editing operations. Transfer and saving at 4 times normal speed Uploading and downloading between the built-in VTR and hard disk can be conducted at 4 times normal speed. As a result, it takes much less time to perform the preparatory steps which handicap non-linear editing. Same high picture quality recording as with DVCPRO The same digital component compression recording system as for DVCPRO is used to record data onto the hard disk. The resulting picture quality is higher than that achieved by JPEG which has been adopted by many nonlinear editors (comparison made at the same transfer rate). Seventy minutes of picture and sound data can be recorded on the internal hard disk (standard specifications: 16GB). Transfer of data while still compressed The data is uploaded or downloaded at 4 times normal speed between the tape and disk using the DV compression format which obviates the need for A/D (D/A) conversion and compression/expansion processes. Consequently, there is absolutely no deterioration in the picture quality during transfer. Editing of data while still compressed In the case of cut editing, the unit leaves the recorded data completely unchanged. With the data still in its compressed form, changes are made only to the read sequence and positions. During recording, the DV compressed data does not need to be expanded at all, and it can be edited up to the form taken by the completed package. This means that high picture quality is maintained even after editing. (When the special effect and superimpose functions are used, the data is expanded into full bit digital video data, and compressed back again after processing.) Real-time previous of special effects The unit contains a switcher so that wipe, dissolve and other special effects can be previewed on a real-time basis during A/B roll editing. Trial-and-error operations can be repeated any number of times while checking how the results turn out. External VTR control (RS-422A) The unit’s RS-422A (9 Pin) remote connector enables a wide range of analog or digital VTRs to be controlled. This function enables material to be incorporated and completed packages to be transmitted. WJ-MX1000 operation system adopted The unit features a user interface which is compatible with the Panasonic’s non-linear AV ...