Оценок - 1, средний балл: 3
(
)
)
|
Фрагмент инструкции
The center marker and safety zone marker, etc. are also displayed. When the MENU SET/OFF switch is set to OFF, items set to SET at the VF DISPLAY page of the setting menu and using related switches appear at the top and bottom of the screen. Messages informing of the setting contents or of the adjustment course or results can also be displayed for approximately 3 seconds when settings are changed, during the course of adjustments, or after adjustments have been completed. •See “Selecting Display Items" (page 56) for selecting display items, “Display Mode and Setting Change Message” (page 57) for the setting change message, and “Setting the Marker Displays” (page 58) for the marker displays. The display positions of all items which can be displayed are shown in the figure below. 1. Extender display 2. Shutter speed/mode display 3. Remaining tape length display 4. Remaining battery level display 5. Filter display 6. White balance memory display 7. Gain value display 8. Audio level display 9. Iris value display 10. Warning display 11. Safety zone marker 12. Center marker 13. Super iris ON display 14. MARK1/MARK2 display 15. TCG (Time Code Generator) display -53- Status Displays Inside the Viewfinder Screen 1 Extender display This is displayed when the lens extender is being used. 2 Shutter speed/mode display This displays the shutter speed or shutter mode setting. OFF: The shutter is not used. 1/100, 1/120, 1/250,1/500,1/1000, 1/2000: Shutter speeds (seconds) during standard mode. 1/30.2-1/250 (SYNCHRO SCAN): Synchro scan mode is selected. SUPER V: High vertical resolution mode is selected. 3 Remaining tape length display This indicates the remaining tape length (minutes) for the VTR during recording. Remaining tape length display Remaining tape length display (25 Mbps) (50 Mbps) Display Remaining tape length F—60 Full to 60 minutes 60-55 60 to 55 minutes 55-50 55 to 50 minutes 50-45 50 to 45 minutes 45-40 45 to 40 minutes 40-35». 40 to 35 minutes 35-30 35 to 30 minutes 30-25 30 to 25 minutes 25-20 25 to 20 minutes 20-15 20 to 15 minutes 15-10 15 to 10 minutes 10-5 10 to 5 minutes 5-0 5 to 0 minutes Display Remaining tape length F-30 Full to 30 minutes 30-25 30 to 25'minutes 25-20 25 to 20 minutes ro 0 01 20 to 15 minutes 15-10 15 to 10 minutes 10-5 10 to 5 minutes 5-0 5 to 0 minutes The “5-0" display flashes when there is less than 3 minutes of tape remaining. 4 Remaining battery level display When an Anton Bauer Digital Magnum Series battery is used to supply power to the unit, the remaining battery level is displayed numerically (%). 5 Filter display This displays the type of filter selected. 6 White balance memory display This displays the selected white balance automatic adjustment memory. A: The WHITE BAL switch is set to A. B: The WHITE BAL switch is set to B. P: The WHITE BAL switch is set to PRST. ( Gain value display This displays the image amplifier gain setting (dB) set by the GAIN switch.