Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
7 USB HOST mode indicator Indicated when the mode has been switched to USB HOST. Chapter 6 Manipulating Clips with Thumbnails 111 Chapter 6 Manipulating Clips with Thumbnails 8 Clip Number The numbers set by the camera for all the clips recognized correctly by the P2 card. These numbers are allocated in chronological order, by shooting dates and times. If clips cannot be played because of different recording formats, they are displayed in red. 9 X Defective Clip Indicator and ? Unknown Clip indicator This marker is displayed for defective clips, which may result from a variety of causes, e.g., powering-down during recording. Clip with yellow defective clip indicators can be restored in some cases. Please refer to [Restoring Clips] (page 118) for more information. A clip displayed with a red defective clip indicator cannot be restored and must be deleted. If the clip cannot be deleted, format the P2 card. ? is displayed for clips such as those which differ in format from the P2 standard. 10 ! Incomplete Clip Indicator Indicates that although a clip is recorded across multiple P2 cards, one of these cards is not inserted into a P2 card slot. 11 M Shot Mark Indicator This marker is displayed for a clip with a shot mark attached. For details, refer to [Shot Marker (SHOT MARK) Recording Function] (page 46). 12 P Indicator for clips with proxy This marker is displayed for clips with proxy attached. 13 T Text Memo Indicator This marker is displayed for a clip with a text memo attached. 14 E Edit Copied Clip Indicator In models which support edit copying, such as the AJHPM110, this marker is displayed on clips which have undergone edit copying. For more information about edit copying, see the instruction manual for a model that supports edit copying. 15 W Wide Clip Indicator This marker is displayed for clips recorded with the 16:9 aspect ratio. However, it does not accompany clips in HD format. 11 Selecting Thumbnails Multiple thumbnails can be randomly selected in the thumbnail screen. 1 Use the cursor buttons to move the pointer (yellow frame) to the desired clip and press the SET button. • The frame around the selected thumbnail changes to a blue frame. Press the SET button again to deselect the clip. 2 Additional clips can be selected by repeating step 1. It is possible to display only the selected thumbnails in the thumbnail screen for playback. Please refer to [Switching the Thumbnail Display] (page 114) for more information. .NOTE • To move the pointer to the first or last clip, hold down the SHIFT button and press the up and down cursor ([/ ]) buttons. • To select a sequence of clips, select the first clip and move the pointer to another clip.Then hold down the SHIFT button and press the SET button.This will select all clips from the clip selected first to the clip at the pointer and all clips in between. • To cancel selected clips, hold down the SHIFT button while pressing the EXIT button. a bcde f a LCD monitor b THUMBNAIL button c EXIT button d eqrwcursor buttons g SET button e THUMBNAIL MENU button f SHIFT button Playing back Clips Press the THUMBNAIL button. 1 • The thumbnail screen appears on the LCD monitor. 2 Use the cursor buttons to move the pointer over the desired clip. 3 Press the PLAY/PAUSE button. • The clip at pointer position is played back on the LCD monitor. • After the clip at the cursor location has been played, subsequent clips are played back in order. When the last clip has been played, the thumbnail screen appears. .NOTE • When playing back clips, it is not necessary to “select” the clips (blue frames around the thumbnails). • Clips with clip numbers displayed in red cannot be played. • During playback, pressing the REW button starts 4X speed reverse playback, and the FF button starts 4X speed fast playback. Press the PLAY/PAUSE button to return to normal playback. • During clip playback, pressing the PLAY/PAUSE button will temporarily stop (pause) the process. During a pause, pressing the REW button moves the pause position to the beginning of the clip. Pressing the REW button again moves the pause position to the beginning of the previous clip. During a pause, pressing the FF button moves the pause position to the beginning of the next clip. • Pressing the STOP button during clip playback stops the playback and returns the display to the thumbnail screen. • NOTE • When playback is stopped, the position of the pointer moves to the clip that was being played back, regardless of where playback started. • When the PLAY/PAUSE button is pressed again, playback will start from the beginning of the clip on which the pointer is positioned. To begin playback from the last stop position, set PLAYBACK RESUME to on. Refer to [Setting the Thumbnail Display Mode] (page 124) for further details. • After closing the thumbnail screen by pressing the THUMBNAIL button, pressing the PLAY/PAUSE button plays back the first clip (i.e., the clip with the earliest recording date and time), not the clip on...