Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Do not touch them with your fingers, etc. Do not disassemble or deform the card. Be sure to make a backup copy of important data. Do not affix other labels to the CompactFlash Card face or back as Card insertion/removal may become impossible. 34 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Digital Still Camera Recording Note: • Please note that the included 8 MB CompactFlash Card already contains 12 pre-recorded titles for your use. Please see page 41 for further details. • If CompactFlash Card is not inserted, “NO CF CARD" appears on-screen. Set POWER to OFF, then insert the CompactFlash Card. • If “CF CARD ERROR” appears onscreen, see page 56. • Sound will not be recorded. • The features below are not available while in PHOTO mode. Auto Fade Color Digital Filter Digital E.I.S. Security Mode Digital Wipe Mode Picture in Picture Wipe Title Digital Fade Digital Zoom Still/StrobeAA/ide Intelligent Titler Before you begin... • Connect Camcorder to power source. • Insert the CompactFlash Card (page 34). 1 2 Power Lamp Press LCD-OPEN and swing LCD monitor fully open. Adjust viewing angle. Set POWER to PHOTO. Built-in Lens Cover opens and Power Lamp lights. • Be sure POWER is fully rotated to PHOTO position. Slide PHOTO to REC. Press MENU for REC Mode. Press UP A or DOWN ▼ to select NORMAL or FINE (page 49). Then, press DISPLAY to set. REC MODE - - - NORMAL laifla SELECT; PUSH T/AKEY SET : PUSH OtSPLAY KEY. Press RECORD/PAUSE to capture image. • As the image is processed, the status screens below appear. The next image may be captured after “COMPLETED" disappears. * Depending on the image taken, the image page remaining indication may not change, or it may be decreased by 2 images. r \ oeo FINE Ю PHOTO 059 FINE (СЭ PHOTO PROCESSING COMPLETED J к ) For sharper images, set electronic shutter to higher speed when shooting in bright conditions, such as outdoors. r- WARNING:- Do not, under any circumstances, remove the card immediately after pressing the RECORD/PAUSE (during recording of an image) or while deleting. This could damage the format of the card and make it unusable. Digital Still Camera Before you begin... • Connect Camcorder to power source. • Insert the CompactFlash Card (page 34). • Set POWER to PHOTO. Using the Light For capture of still images in dim lighting. Set LIGHT to AUTO. When RECORD/PAUSE is pressed to capture an image in dim lighting, the Light comes on for about 2 seconds, the image is captured, then the light goes out. Or, set LIGHT to ON/OFF manually. (See page 15 for further details.) Note: • If CompactFlash Card is not inserted, “NO CF CARD" appears on-screen. Set Power to OFF, then insert the CompactFlash Card. • Pictures captured with other brand products cannot be used with this Camcorder. • If “INCOMPATIBLE IMAGE” appears onscreen, the size of the captured image cannot be played back on this Camcorder. • Do not change POWER setting to CAMERA or change recording mode while “PLEASE WAIT’ is displayed. • If “CF CARD ERROR" appears on-screen, see page 56. 36 1 □□□ □□□ SELECT; PUSH V+KEY SET : PUSH PLAY KEY DELETE: PUSH DEL KEY Press LCD-OPEN and swing LCD monitor fully open. Adjust viewing angle. Slide PHOTO to _ PLAY. The Multi Image Playback screen appears. The last captured image screen is underlined. • If there are no recordings on the card, “NO PICTURE” appears on-screen. • In NORMAL or FINE mode, the color of the Multi Image page number is as follows: NORMAL mode -* green FINE mode -* white Press + (FF) -* next. Press - (REW) -> previous. • The selected image will be underlined in green. • Continue pressing + (FF) or - (REW) for next or previous page. Press PLAY to display image. This screen appears followed by image. PLEASE WAIT SELECT: PUSH V+ KEY MULTI : PUSH STOP KEY Press DISPLAY to remove or redisplay this screen. Press STOP to redisplay Multi Image playback screen. For assistance, please call: 1-800-211-PANA(7262) or send e-mail to: consumerproducts@panasonic.com Digital Still Camera Displayed Directory/Image Number Before you begin... • Connect Camcorder to power source. • Insert the CompactFlash Card (page 34). • Set POWER to PHOTO. 1 Repeat steps 1 and 2 on page 36 to display Multi Image Playback screen. Select any image and press PLAY. Press MENU for DCF NUMBER DISPLAY menu. Press UPA or DOWNY to select ON or OFF. Then, press DISPLAY to set. - - DCF NUMBER DISPLAY - - mi OFF SELECT: PUSH T/A KEY SET : PUSH DISPLAY KEY ON OFF- Directory/lmage Number is displayed. Directory/Image Number is not displayed. 000 FINE Di rectory/l mage —oawooo Number SELECT ; PUSH -/♦ KEY MULTI : PUSH STOP KEY Note: * Directory/Image Number “xxx-xxxx” (x indicates the number) is assigned automatically. • Even if ON is set, if the Directory/Image Number does not correspond with DCF.it is not displayed. •The Directory/Image Nu...