Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
Before you begin • Connect the Palmcorder to a power source. (pp. 11, 12) 1LCD-OPEN Cassette Compartment Cover 4PUSH 2TAPE EJECT CLOSE 1 Press LCD-OPEN to unlock the LCD monitor, and swing it fully open. 2 Slide TAPE EJECT to open the Cassette Compartment Cover. 3 Insert a cassette record tab up, window side facing out. 4 Press PUSH CLOSE to close the Cassette Compartment Cover. 1 Undo the two strap ends from their buckles. 2 Thread the strap ends through the Strap Attachment Rings. 3 Reinsert the strap ends through their buckles. • Make sure the straps are not twisted. OR 1 Loosen the strap from the Buckle and create a loop. 2 Pull the strap firmly through the Buckle to shorten or lengthen the strap. 1 Adjust the Length Adjust the length of the Hand Strap to the size of your hand as illustrated. Attaching the Lens Cap Strap to the Hand Strap: Remove the Hand Strap from the front clasp and thread the Strap through the loop in the Lens Cap Strap. Reattach the Hand Strap. Lens Cap Attaching the Shoulder Strap 2 3 1 Attaching the Lens Cap Strap: Thread the Lens Cap Strap through the Strap Attachment Ring as shown. Hand Strap Hand Strap Note • When inserting the cassette, make sure it is facing the right direction and then push it in completely. 8 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com [ EVF or LCD Monitor ] Before you begin • Connect the Palmcorder to a power source. (pp. 11, 12) 1 Set POWER to CAMERA. 2 Press MENU to display the CAMERA FUNCTIONS menu screen. 3 Rotate JOG KEY to select OTHER FUNCTIONS , and press JOG KEY to display the OTHER FUNCTIONS menu screen. 4 Rotate JOG KEY to select DEMO MODE , and press JOG KEY to select OFF. • Press MENU to exit. Before Using 1 Hold down LIGHT for more than 0.7 second to turn ON or OFF. • “ ” will appear on the screen. To brighten the natural colors in a scene. Using the Built-in Light Caution This light becomes hot during operation. Make sure nothing covers the light during operation. • Using Light reduces battery time. • Provide adequate ventilation if using Light in a hot environment for a long time. • Set LIGHT to OFF when not in use. • When replacing the bulb, see page 48. Built-in Light Note Before you begin • Connect the Palmcorder to a power source. (pp. 11, 12) • Set POWER to CAMERA. 1LIGHT Note 1POWER 2MENU 3, 4 JOG KEY Self Demo Mode If no operation takes place for approx. 10 minutes after the AC Adaptor was connected to the Palmcorder and the POWER Switch was turned to CAMERA without inserting a Cassette, the Palmcorder is automatically set to Self Demo mode for introducing its function. To turn it off, follow steps 1~4 below. • If any button is pressed or operated (except PLAY/MULTI, ZOOM and LIGHT), the Self Demo mode is canceled. • The Self Demo mode can be started by setting DEMO MODE to ON and by exiting the menu. To turn Self Demo back on: • Set to DEMO MODE : ON in MENU screen. Quick Guide Insert the Battery Pack 1 Insert the Battery Pack and slide Before you begin • Charge the Battery. (p. 11) 12 it up until it locks with a click. Insert Cassette These Palmcorders are equipped with the Easy Cassette Eject System so it is easy to insert or remove tapes, even when on a tripod. (p. 7) 1 Press LCD-OPEN to unlock the LCD 2 Set POWER to VCR or monitor, and swing it fully open. CAMERA. 3 Slide TAPE EJECT to open the Cassette Compartment Cover. 4 Insert a cassette record tab up, window side facing out. 5 Press PUSH CLOSE mark to • Make sure the record tab close the Cassette is closed. (p. 6) Compartment Cover. Before 9 10 For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Quick Guide Camera Recording When the LCD monitor is fully open, the Viewfinder automatically turns OFF. 180° 90° LCD Monitor 2 Adjust the Vision Adjustment Control to your eyesight. 4 Press REC/PAUSE to start recording. Press REC/PAUSE again to pause recording. Viewfinder 1 Set POWER to CAMERA. 3 Press LCD-OPEN to unlock the LCD monitor. Swing it fully open and adjust the angle. To Watch Playback in the LCD (Liquid Crystal Display) When the LCD monitor is fully open, the Viewfinder automatically turns OFF. 3 Press (REW) to rewind the tape. 4 Press (PLAY) to start playback. 5 Press (STOP) to stop playback. Before you begin • Charge the Battery. (p. 11) 2 Press LCD-OPEN to unlock the LCD monitor. Swing it fully open and adjust the angle. 180° 90° 1 Set POWER to VCR. Supplying Power Charge the Battery Pack on the AC Adaptor 1Connect and plug in the Power Cord as shown. • POWER Lamp will light. • Remove the DC Cable, if attached, from the adaptor. 2Attach the Battery as shown to charge. • CHARGE Lamp lights up. It goes out when charging is complete (approx. 1 hour). Expect approx. 1 hour 50 minutes of operation (using EVF) when fully charged. 3Remove the Battery. Slide the Battery out and then lift up. Note About the Flashing of the CHARGE Lamp • Charge the Battery within an amb...