Оценок - 4, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
.Depending on the time taken to bring the subject into focus, the recording may take longer than set to start. To stop the timer midway through Press the MENU button. Intelligent contrast control This brightens parts that are in shadow and difficult to see and suppresses white saturation in bright parts at the same time. Both bright and dark parts can be recorded clearly. VQT1T64 Function Effect Automatic face detection Brightness, quality, and focus are adjusted automatically so the face will be recorded clearly by detecting the face when it is recorded in the dark, such as when the light is shining from behind the objects. In the Automatic face detection mode, detected faces appear with frames. . Up to 15 frames are indicated. Larger faces and faces nearer to the center of the screen take preference over others. . Faces that do not appear completely on the screen are not detected. . Prioritized face framing The face that is larger and nearer to the center of the screen within the detected faces will be framed with an orange frame (prioritized face framing). Focus and adjustment of brightness will be performed against the prioritized face framing. . Set the focus manually when set to manual focus. Prioritized face framing will not be displayed. . Focus will be set to prioritized face framing when the button is pressed halfway when recording still pictures. Prioritized face framing will turn to green when the focus is set. . To display the face detection framing Select the menu. (l29) [RECORD SETUP] # [FACE FRAMING] # desired setting [OFF]: Not display [PRIMARY]: Only the prioritized face framing is displayed. [ALL]: All face detection framings are displayed. . Set to [OFF] to not display the face detection framing. . This function’s default setting is [ALL]. Soft skin mode This makes skin colors appear softer for a more attractive appearance. This is more effective if you record a person closely from the torso up. MagicPix This function allows you to record color images in very low light situations. (Minimum required illumination: approx. 1lx) Tele macro This is for close-ups bringing only what you want to record into focus. By focusing only on the subject and blurring the background, the image can be impressive. . The unit can focus on the subject at a distance of approx. 40 cm (16q). . If the magnification is 12k or less, then it is automatically set to 12k. VQT1T64 Function Effect Headphone volume adjustment Adjusts the volume of the headphone while recording. :Increases the volume :Decreases the volume .Actual volume to be recorded does not change. Fade: .The thumbnails of scenes recorded using fade in become black (or white). .It will be canceled automatically once the recording time for one scene exceeds 12 hours. Help mode: .When the help mode is used, functions cannot be set. .When the help mode is used, motion pictures and still pictures cannot be recorded. Self-timer: .The self-timer standby mode is canceled when you press the recording start/stop button to start motion picture recording. Even if you press the recording start/stop button while the self-timer is counting down, motion picture recording is not possible. .Setting the self-timer to [O2] is a good way to prevent image shake when the button is pressed while using a tripod etc. Intelligent contrast control: .If there are extremely dark or bright parts or the brightness is insufficient, the effect may not be clear. Automatic face detection .In the following case, faces may not be detected in some recording conditions. jFaces are not full-faces jFaces tilt jFaces are extremely bright or dark jShadows on faces are a few jFaces are not completely exposed (for instance wearing sunglasses) jThe size of a face is small on the screen. jThe subject moves quickly. jWhen the hand shakes jWhen the digital zoom is used jWhen the unit is tilted .In the following cases, the function may not operate properly even if faces are detected. If this occurs, turn off this function. jNonhuman subjects are recognized as faces. jWhen the brightness or quality cannot be adjusted clearly since scenes are extremely dark, or the areas around the faces or the background is extremely bright. .Since the brightness of the entire image is adjusted to record faces more vividly, brightness may change suddenly or images may flicker under some recording conditions. .When the face detection frame disappears due to zooming, the brightness may change suddenly or the images may flicker. VQT1T64 Soft skin mode: . n darker areas, auto focus may focus a bit slower. This is normal. If there is difficulty ocusing with auto focus, manually adjust the ocus. .Attach this unit to a tripod, and you can record images free from vibration. .MagicPix function makes dark scenes that are usually invisible can be recorded in bright colors. For this reason, bright dots that are usually invisible may be seen, but this is not a malfunction. set in a bright place, the screen may become washed out for...