Оценок - 2, средний балл: 3.5 ( )

Производитель: Panasonic Размер: 8.35 mb Название файла: HCX900M-MUL.PDF Язык инструкции:

. These times are approximations. . The indicated charging time is for when the battery has been discharged completely. Charging time and recordable time vary depending on the usage conditions such as high/low temperature. . The actual recordable time refers to the recordable time when repeatedly starting/stopping recording, turning the unit on/off, moving the zoom lever etc. . The batteries heat up after use or charging. This is not a malfunction. Battery capacity indication .The display changes as the battery capacity reduces. #### If there is less than 3 minutes remaining, then will become red. If the battery discharges, then will flash. .Screen display will disappear when no touch operation is performed. However, it will be constantly displayed when the remaining battery time becomes less than 30 minutes. .The remaining battery capacity is displayed when using the Panasonic battery that you can use for this unit. The actual time can vary depending on your actual use. .When using the AC adaptor or batteries made by other companies, the remaining battery capacity will not be shown. VQT4C76 Preparation Recording to a card Preparation Recording to a card The unit can record still pictures or motion pictures to an SD card or built-in memory. To record to an SD card, read the following. This unit (an SDXC compatible device) is compatible with SD Memory Cards, SDHC Memory Cards and SDXC Memory Cards. When using an SDHC Memory Card/SDXC Memory Card with other equipment, check the equipment is compatible with these Memory Cards. Cards that you can use with this unit Use SD cards conforming to Class 4 or higher of the SD Speed Class Rating* for motion picture recording. Card type Capacity SD Memory Card 512 MB/1 GB/2 GB SDHC Memory Card 4 GB/6 GB/8 GB/12 GB/16 GB/24 GB/32 GB SDXC Memory Card 48 GB/64 GB * SD Speed Class Rating is the speed e.g.: standard regarding continuous writing. Check via the label on the card, etc. . Please confirm the latest information about SD Memory Cards/SDHC Memory Cards/SDXC Memory Cards that can be used for motion picture recording on the following website. (This website is in English only.) . Operation of the SD Memory Card 256 MB or less is not guaranteed. Also, the SD Memory Card 32 MB or less cannot be used for the motion picture recording. . 4 GB or more Memory Cards that do not have the SDHC logo or 48 GB or more Memory Cards that do not have the SDXC logo are not based on SD Memory Card Specifications. . The operation of Memory Cards exceeding 64 GB cannot be guaranteed. . When the write-protect switch A on SD card is locked, no recording, deletion or editing will be possible on the card. . Keep the Memory Card out of reach of children to prevent swallowing. 32 VQT4C76 25 VQT4C76 Inserting/removing an SD card Caution: Check that the access lamp has gone off. 1 Open the SD card cover and insert/remove the SD card into/ from the card slot. . Face the label side B in the direction shown in the illustration and press it straight in as far as it will go. . Press the center of the SD card and then pull it straight out. 2 Press the C part of the SD card cover and close the SD card cover. . Securely close it until it clicks. . Do not touch the terminals on the back of the SD card. . Do not apply strong shocks, bend, or drop the SD card. . Electrical noise, static electricity or the failure of this unit or the SD card may damage or erase the data stored on the SD card. . When the card access lamp is lit, do not: jRemove the SD card jTurn the unit off j Insert and remove the USB cable jExpose the unit to vibrations or shock Performing the above while the lamp is on may result in damage to data/SD card or this unit. . Do not expose the terminals of the SD card to water, dirt or dust. . Do not place SD cards in the following areas: j In direct sunlight j In very dusty or humid areas jNear a heater jLocations susceptible to significant difference in temperature (condensation can occur.) jWhere static electricity or electromagnetic waves occur . To protect SD cards, return them to their cases when you are not using them. . About disposing of or giving away the SD card. (l 160) When using an SD card not from Panasonic, or one previously used on other equipment, for the first time on this unit, format the SD card. (l 50) When the SD card is formatted, all of the recorded data is deleted. Once the data is deleted, it cannot be restored. Access lamp [ACCESS] A . When this unit is accessing the SD card or built-in memory, the access lamp lights up. . 26 VQT4C76 You can turn the unit on and off using the power button, the LCD monitor or the viewfinder. Open the LCD monitor and press the power button to turn on the unit. A The status indicator lights on. Opening the LCD monitor or extending the viewfinder turns on the unit. Closing the LCD monitor/viewfinder turns off the unit. During general use, you may find it convenient to turn the unit on/off using...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: