Войти:
Оценок - 4, средний балл: 4 ( )

Инструкция по эксплуатации Panasonic, модель AWE560

Производитель: Panasonic
Размер: 1.07 mb
Название файла: AWE560.PDF
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


The conversion cable and the studio cable must be connected with the connector supplied as a standard accessory with the conversion cable. 4. Turn RCU power on and the power indicator lamp will light. The camera can now be remote controlled by the RCU. NOTES: • Maximum extension length: 300 meters (Studio cables must be connected with joint adaptor WV-CA26T26.) • Use only the specified cables. WV-RC700A (Kwra if, "w* ms o o o o Ä mO. a -WOW* mm K8 A SSWMUU. «¡TO Connector supplied with WV-CA26T20 ■CO CZnniQ innZXn Conversion cable (Option) WV-CA26T20 (10 ft/3 m) Studio cable (Option) WV-CA26U15 (50 ft/15 m) WV-CA26U30 (100 ft/30 m) WV-CA26U100 (330 ft/100 m) mir -16- ■ CONNECTION OF A REMOTE CONTROLLER (RCU AND A COAXIAL MULTIPLEX SYSTEM) The optional multiplex adaptor WV-PS550 is used for connection of a coaxial multiplex system. 1. Turn RCU power off before connecting cables. 2. Connect the optional multiplex adaptor WV-PS550 to the control connector of the camera through the standard accessory cable supplied with the WV-PS550. 3. Set the cable selection switch of the RCU to VP. 4.. Connect the MPX connector of the multiplex adaptor and that of the RCU with a coaxial cable (Belden 8281 or equivalent). 5. Turn RCU power on and the power indicator lamp will light. The camera can now be remote controlled by the RCU. NOTES: • Use only model WV-RC700A (with WV-CB700A) as an RCU. • A coaxial multiplex system cannot be used with a studio 26-pin cable. • R/G/B, Y/C and Y/PR/PB signals cannot be transmitted through this system. Use a studio cable if any of these signals is required. • The maximum cable extension length allowed for this system is 300 meters. -17- ■ CONNECTION OF A REMOTE CONTROL BOX (RCB) The RCB (WV-CB700A) and the camera must be connected with the optional conversion cable WV-CA20T10. 1. Turn RCB.power off before connecting cables. 2. Connect the 20 pin connector of the conversion cable to REMOTE connector of the camera. The 10-pin connector must be connected to the RCB accessory cable or an optional RCB cable. 3. Turn RCB power on and the camera can be remote controlled by the RCB. NOTES: • The monitor output signals of the RCB attenuate and deteriorate with cable length. It is recommended that the signals from the monitor output be used for monitoring purpose only. * No gen-lock signal is available from the RCB. ©r ,wmi Conversion cable WV-CA20T10 (Option) (3 ft/ 1m) is A SHIUNUAL CAUTION WtlDS Mumm' The RCB accessory cable, WV-CA10B25 (80 ft/25 m) or WV-CA10B50 (160 ft/50 m). Conversion Cable WV-CA4C4P Video signals -cm Hüt> Power Cable (locally purchased) To AG-B640 or AU-B110 r- Cautions- 1. Connect this to a 12V DC class 2 power supply only. 2. To prevent fire or shock hazard, the UL listed wire VW-1, style 1007 should be used as for the cable for 12V DC Input Connector. Power supply: 12 V DC. 2A min. WV-CB700A RCB, Rear view -18- CONNECTION WITH MULTIPLE CAMERAS I An example of connection for VBS/BB input (Color lock mode). • A special effect generator is used as the source of reference signals. • Supply a synchronizing signal (VBS/BB) to the GEN-LOCK Connectors of both the RCU and the camera. • Adjust the SC phase and H phase at the Program Out Connector. There are two other modes such as VS input (No color lock mode) and HD/VD input (monochrome mode), which can be selected for your application. AUX IN Preview Program F IN IN Line out Special effects generator VIDEO OUT -19- CONNECTION OF COMPUTER INTERFACE ADAPTOR The system shown here can remotely control this camera by using the Computer Interface Adaptor WJ-PC500. The software required for this operation should be obtained locally. Please contact qualified service personnel for this software. PC Mode System 1-1 Connect the WV-CA20T10 Conversion Cable and WV-CA 10B02, WV-CA10B25 or WV-CA10B50 10/10-pin Cable between the Camera 1 Input Connector on the Computer Interface Adaptor and Remote Connector of this camera. Connect the coaxial cable between the Monitor Output Connector on the Computer Interface Adaptor and the video input connector of the monitor. Connect the 25/9-pin conversion cable between the RS-232C/422 Connector on the Computer Interface Adaptor and computer. Note: The decrement of the video signal from the Monitor Output Connector on this Unit is in proportion to the cable length. -20- ■ CONNECTION PROCEDURES FOR CABLE KIT WV-CA28T10 • The kit WV-CA28T10 has the following two cables in it. • 20P-BNC cable CA20TBNC • Pan/Tilt control cable CA28T103 • Connect the camera AW-E560 to the remote control box WV-CB550 with the CA20TBNC coaxial cable. • Connect the camera AW-E560 to the receiver WV-RC100 with the CA28T103 cable according to the cable connecting instructions. • Connect the camera AW-E56Q to the remote control box WV-CB550 with two coaxial cables (video signal and G/L signal). (PSF 1/2M, maximum total length ...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории