Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
This item can be selected by pressing the switch while the menu is on the screen. 8. ITEM/AWC Switch (ITEM/AWC/S) The item just below can be selected by pressing this switch while the menu is on the screen. When the menu is not displayed or the camera is in shooting mode, the automatic white balance control can be set with this switch. 9. YES/ABC Switch (YES/ABC/+) The Sub Menu for each item of the Main Menu is displayed when this switch is pressed while the Main Menu is on the screen. While the Sub Menu is displayed, any setting can be brought up to a higher value with this switch. When the menu is not displayed or the camera is in shooting mode, the automatic black balance control can be set with this switch. 10. NO/BAR Switch (NO/BAR/.) The item just below can be selected by pressing this switch while the Sub Menu is on the screen. While the Sub Menu is displayed any setting can be brought down to a lower value with this switch. When the menu is not displayed or the camera is in shooting mode, the color bar and the shooting conditions are indicated by pressing the switch. 11. Video Output Connector (VIDEO OUT) A composite video signal is provided at this connector. 12. Iris Connector (IRIS) Input terminal for lens with an iris control function. 1 2 3 4 5 6 7 8 9 10 1112 Pin No. Signal Pin No. Signal 1 Return Control 7 Iris Follow 2 Not Used 8 Auto/Remote Control 3 GND 9 Not Used 4 Auto/Manual Control 10 Not Used 5 Iris Control 11 Not Used 6 Lens Power 12 Not Used 13. Zoom/Focus Connector (ZOOM/FOCUS) (model AW-E655 only) This connector is for the remote cable of the lens and is a standard input connector for lenses with remote functions for zooming and focusing. When the camera is to be mounted on a Panasonic pan/tilt head (such as the AW-PH300A), do not use this connector — connect the remote cable of the lens to the LENS I/F connector on the pan/tilt head instead. -11 1 2 3 4 5 6 7 8 9 10 1112 Pin No. Signal Pin No. Signal 1 Focus Mode Position/Speed /Auto Focus 7 Signal Control (+5.0 V) 2 Zoom Mode Position/Speed 8 Focus Control 3 GND 9 Zoom Control 4 Iris Remote/Camera 10 Iris Mode Position/Speed 5 Iris Control 11 +V (+7.5 V) 6 Lens Power 12 –V (+2.5 V) 14. I/F Remote Connector (I/F REMOTE) Input terminal dedicated to control signals from the optional Remote Control Box (RCB) (such as the WV-CB700A) and the RCU (such as the WV-RC700A, WV-RC550) and the camera pan/tilt unit (such as the AW-PH300A). • WV-CB700A is connected through the optional RCB cable (AW-CA50T10/AW-CA50B10). • WV-RC700A/WV-RC550 is connected through the optional RCU cable (AW-CA50A26). • AW-PH300A is connected through the optional pan/ tilt unit cable (AW-CA50T15/AW-CA50A15). • Use the camera/pan-tilt head connecting cable (AW-CA50T29/AW-CA50C29) to connect the AW-PH350 to the convertible camera. 15. Power Indicator Red LED lamp lights to indicate that the specified DC power is supplied to the camera. 16. DC 12 V Input Connector (DC 12V IN) 12 V DC is supplied through the optional DC power supply cable (AW-CA4T1). (Recommended AC adaptor: AW-PS505) Cautions 1. Connect this to a DC 12 V class 2 power supply only. 2. To prevent fire or shock, the UL listed wire VW-1, style 1007 should be used as for the cable for DC 12 V Input Connector. 17. G/L Input Connector (G/L IN) Signals synchronized with the reference signal are to be supplied to this connector when the camera is to be synchronized with the reference signal BB. 18. Cable Clamp Clamp the DC Power Supply Cable (AW-CA4T1) connected to the DC 12 V Input Connector to prevent it from slipping out. 19. Optional Card Slot Slot for inserting an optional card. For details, refer to the manual for optional cards. -12 MOUNTING 1. Lens Mounting AW-E750, AW-E655, AW-E650 • Use the lens extension cable AW-CA12T12A (6”/15 cm) if your lens cable is too short. Rotate the lens fixing ring knob counterclockwise and remove the lens mount cap. Mount the lens on the camera and rotate the lens fixing ring knob clockwise in order to fix the lens securely. Connect the camera cable to the IRIS connector on the back panel of the camera. (AW-E750, AW-E650, AW-E350) (model AW-E655 only) To Lens I/F Connector of Control Cable Camera Cable To Iris Connector Camera Pan/tilt Unit AW-E350 • A 1/3-inch C mount type of lens can be used. Be absolutely sure that a lens whose mount threads extend no more than 4.3 mm from the lens mount surface is used. Use of any other kind of lens may damage the camera unit. Less than 4.3 mm • Some lenses need to be attached in a different way. Therefore, reference should also be made to the operating instructions that accompany the lens. Remove the lens mount cap, align the lens with the thread ridges on the lens mount and screw it securely into place. Connect the lens cable to the IRIS connector. -13 2. Camera Mounting 1. AW-E750 or AW-E655 models: Use the screws provided to attach the accessory mounting adaptor to the bottom panel of the camera. AW-E650 or AW-E350 models: Use t...