Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
The VCR begins rewinding or fast forwarding to the specified point. The time counts down on the screen beneath TIME SEARCH as the searching progresses.When the tape finishes rewinding or fast forwarding, the VCR will start play automatically. TIME SEARCH 2 : 5 0 D Helpful Hints • You can set a Time Search for up to 9 hours, 59 minutes (9:59). • Time Search is not available during recording. • To exit Time Search mode, press CLEAR. • To cancel a Time Search in progress, press STOP. • If the end of the tape is reached during a Time Search, the VCR will cancel the search and rewind the tape. See page 38. Index Search 37 When you make a recording, the VCR places an index mark at the beginning of the recording. Essentially, an index mark is a type of “bookmark” for your tape.This feature is useful if you have several different programs recorded on a single tape. Skip over programs by following the steps below. Before you begin, make sure: The VCR is on and is in VCR position. (The VCR/TV light will appear. If it does not, press VCR/TV once.) There is a tape in the VCR. 1 1 Press SEARCH MODE until INDEX SEARCH appears. INDEX SEARCH -2 2 Within 30 seconds, press PLAY or STOP repeatedly until the number of programs that you want to skip appears beneath INDEX SEARCH. This number should include the current program. For example, if you are currently viewing program 2 and you want to skip to program 5, select 03 to skip three programs (2, 3, and 4). Playback will begin at program 5. If you want to skip to program 1, select 02 to skip two programs (2 and 1). Playback will begin at program 1. CURRENT PROGRAM 03 Beginning INDEX SEARCH End of tape of tape Pro.1 Pro.2 Pro.3 Pro.4 Pro.5 020101 0203 INDEX MARK 3 3 Within 30 seconds, press REW or F.FWD. The VCR rewinds or fast forwards to the beginning of the program. When the program is reached, play will begin. INDEX SEARCH 03 D 2-3 CH 321 654 987 0 POWER STATUS SLOWREC MEMORY SPEED SEARCH MODE STILL/PAUSE VCR/TV EJECT MENU CLEAR REW PLAY STOP F.FWD 1 • When an index mark is passed during rewinding or fast forwarding, the number of programs beneath INDEX SEARCH decreases by one. • Up to 20 index marks may be searched. • This function is not available during recording. • Press STOP to stop the search. • To exit Index Search, press CLEAR. • The time gap between index marks should be greater than 1 minute for SP recording, 2 minutes for LP recording, and 3 minutes for SLP recording. • If the end of the tape is reached during an Index Search, the VCR will cancel the search and rewind the tape. See page 38. Helpful Hints 38 Automatic Playback Features Automatic Playback When you put a tape in the VCR, the power will come on automatically. If the tape’s record tab is missing, play will begin. (If a timer recording is set, you may have to press POWER to turn on the VCR. Turn off the VCR for the timer recording later. If you insert a tape without a record tab when a timer recording is set, the VCR will eject the tape.) Automatic Rewind, Eject, Off When a tape is played, fast forwarded, or recorded to its end, the VCR will rewind the tape to the beginning, eject the tape, and turn itself off. If the real-time counter memory is set, the VCR will only rewind the tape to the point at which the counter is set to zero,then stop.The VCR will not eject the tape or shut itself off. Tape Eject A tape can be ejected with the VCR power on or off (but the VCR must be plugged in). If a Timer Recording is programmed, a tape can only be ejected with the power on. Be sure to insert a tape for the Timer Recording, then turn off the VCR power. Tracking The VCR automatically adjusts tracking to give you the best possible picture quality during normal play. With some recordings, you may get a better picture using manual tracking. To adjust the tracking manually, press CH on the remote or CHANNEL o/p on the VCR during normal or slow motion play. NOTES: • Tracking returns to automatic tracking adjustment when you insert a tape or stop play. • Use CHANNEL o/p on the VCR or CH on the remote to remove vertical jitter in a Still picture. Before Tracking Adjustment After Tracking Adjustment MTS Broadcast Stereo (MVR650MG/17) 39 Your VCR can play recordings broadcast in Hi-Fi (high fidelity) stereo, which produces a crisp, clear sound from two sources. Your VCR also can play tapes recorded in a second audio (usually, that means your program is recorded in a second language). Of course, your VCR will play tapes recorded in monaural (single- source) sound as well. Your VCR also will record in Hi-Fi stereo or in second audio, so when you play back that tape on the VCR, it will be in stereo or second audio. Read the directions on this page to familiarize yourself with your VCR’s stereo and second audio setups. Then follow the directions on page 40 to record in stereo or second audio and the directions on page 41 to play back tapes recorded in Hi-Fi stereo. Understanding On-Screen Displays When you receive a signa...
Эта инструкция также подходит к моделям:Видеокамеры - MVR450MG/17 (450.31 kb)
Видеокамеры - MVR650MG/17 (450.31 kb)