Оценок - 3, средний балл: 4.7
(
)
)
|
Фрагмент инструкции
The Tuner Band setting allows you to specify which source you are using. Use this setting only if Auto Setup detected the incorrect band, i.e. channels are coming in on the wrong channel numbers. Open “Setup Menu” 1 Press and hold the Menu button for 3 seconds. Select “Tuner & Channel List” 2 Press 3. SETUP MENU 1 Set Clock Menu 2 : Copy/Record Settings 3 : Tuner And Channel List 4 : Dual-Deck Features 5 : Reset Factory Settings ____________________________________ / = Move = Sel MENU=Quit O OO O TUNER AND CHANNEL LIST CH ## Tuner Band Auto Auto Channel Search Add Channel Remove Channel Show Weak Channels No Tuner Audio Stereo ____________________________________ / = Move = Sel MENU=Quit O OO O Set “Tuner Band “ 3 Press the right arrow repeatedly to switch the Tuner Band among: • Auto — Automatically detects Tuner Band. • Antenna — Indicates that you are using an indoor or outdoor VHF/UHF antenna. • Cable — Indicates that you are using CATV (Community Antenna Television), i.e. cable TV. TUNER AND CHANNEL LIST CH ## Tuner Band Auto Auto Channel Search Add Channel Remove Channel Show Weak Channels No Tuner Audio Stereo ____________________________________ / = Move = Sel MENU=Quit O OO Auto Antenna Cable O TUNER AND CHANNEL LIST 29 Auto Channel Search You can perform Auto Channel Search at any time to store 1 Open “Setup Menu” only those channels which are Press and hold the Menu button for 3 seconds. active in your area. SETUP MENU 1 Set Clock Menu 2 : Copy/Record Settings 3 : Tuner And Channel List 4 : Dual-Deck Features 5 : Reset Factory Settings ____________________________________ / = Move = Sel MENU=Quit O OO O Select “Tuner & Channel List” 2 Press 3. TUNER AND CHANNEL LIST CH ## Tuner Band Auto Auto Channel Search Add Channel Remove Channel Show Weak Channels No Tuner Audio Stereo ____________________________________ / = Move = Sel MENU=Quit O OO O Select “Auto Channel Search” 3 Press the down arrow until Auto Channel Search is selected. TUNER AND CHANNEL LIST CH ## Tuner Band Auto Auto Channel Search Add Channel Remove Channel Show Weak Channels No Tuner Audio Stereo ____________________________________ / = Move = Sel MENU=Quit O OO O Start “Auto Channel Search” 4 Press the right arrow to begin searching for all available channels in the selected Tuner Band. This procedure may take a few minutes complete. When Auto Channel Search is finished, it will display the lowest found. Ch03 30 DDV9475 USER’S GUIDE Add Channel Follow these steps to add a channel that was not detected 1 Open “Setup Menu” during Auto Channel Search. Press and hold the Menu button for 3 seconds. SETUP MENU 1 Set Clock Menu 2 : Copy/Record Settings 3 : Tuner And Channel List 4 : Dual-Deck Features 5 : Reset Factory Settings ____________________________________ / = Move = Sel MENU=Quit O OO O Select “Tuner & Channel List” 2 Press 3. TUNER AND CHANNEL LIST CH ## Tuner Band Auto Auto Channel Search Add Channel Remove Channel Show Weak Channels No Tuner Audio Stereo ____________________________________ / = Move = Sel MENU=Quit O OO O Select “Add Channel” 3 Press the down arrow until Add Channel is selected. TUNER AND CHANNEL LIST CH ## Tuner Band Auto Auto Channel Search Add Channel Remove Channel Show Weak Channels No Tuner Audio Stereo ____________________________________ / = Move = Sel MENU=Quit O OO O Tune the Channel 4 Use the number keys (0-9) to enter the channel number, e.g. “1-1” for Channel 11. TUNER AND CHANNEL LIST CH 11 Tuner Band Auto Auto Channel Search Add Channel Remove Channel Show Weak Channels No Tuner Audio Stereo ____________________________________ / = Move = Sel MENU=Quit O OO O Add the Channel 5 Press the right arrow to add your channel list. Repeat more channels. TUNER AND CHANNEL LIST CH 11 Tuner Band Auto Auto Channel Search Add Channel Remove Channel Show Weak Channels No Tuner Audio Stereo ____________________________________ / = Move = Sel MENU=Quit O OO O TUNER AND CHANNEL LIST 31 Remove Channel Follow these steps to remove a channel that was stored during 1 Open “Setup Menu” Auto Channel Search. Press and hold the Menu button for 3 seconds. SETUP MENU 1 Set Clock Menu 2 : Copy/Record Settings 3 : Tuner And Channel List 4 : Dual-Deck Features 5 : Reset Factory Settings ____________________________________ / = Move = Sel MENU=Quit O OO O Select “Tuner & Channel List” 2 Press 3. TUNER AND CHANNEL LIST CH ## Tuner Band Auto Auto Channel Search Add Channel Remove Channel Show Weak Channels No Tuner Audio Stereo ____________________________________ / = Move = Sel MENU=Quit O OO O Select “Remove Channel” 3 Press the down arrow until Remove Channel is selected. TUNER AND CHANNEL LIST CH ## Tuner Band Auto Auto Channel Search Add Channel Remove Channel Show Weak Channels No Tuner Audio Stereo ____________________________________ / = Move = Sel MENU=Quit O OO O Tune the Channel 4 Use the Ch +/– buttons or the number keys (0-9) to enter the channel number. TUNER AND CHANNEL LIST CH 11 Tuner Band Auto Auto Channel Se...