Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
4 Press (5) button to select SP (standard play, for the best picture quality) or EP (extended play, for the longest recording time on a single tape). • An indicator on the VCR's display shows which speed is selected. 5 Press the CH ( / ) button or the number buttons to select the channel you want to record. Example: Select channel 8. • 100/ENT and (2) and (4) for channel 124. 6 Press the REC button on the remote control or the REC/IRT button on the VCR. Recording will start and the REC indicator on the VCR will light red. Notes: • Recording will not start unless the cassette has the safety tab in place. If this tab has been removed, the VCR will eject the tape. • Press the PAUSE button to set the VCR to the recording pause mode. Press the button again to re-start recording. • If you stay in PAUSE mode for more than 5 minutes, the VCR automatically switches to STOP mode to protect the tape. 7 Press the STOP button to finish recording. The commercial advance function setting screen will appear. Select 1 or 2 within one minute after this screen has appeared. If it is not selected within one minute, the menu will disappear and "1 MARKING START" will be selected. • When you press the (1) button and if the recorded program includes commercials, the VCR will rewind the tape automatically and mark the commercials. "CM SEARCH" will flash in the VCR's display. • Press the button (2) to cancel the markings. Note: Do not press buttons during rewinding the tape to mark commercials. To cancel marking during rewinding, press the STOP button. The screen on the right will appear. Press the STOP button again; markings will be cancelled. RECORDING A PROGRAM -RECORDING TIPS To watch one program while recording another 1 Once you have set the VCR for recording, press the VCR/TV button. The VCR indicator disappears. Now, you will be viewing through your TV only. 2 Switch channels using your TV controls or the VCR remote, if it's programmed to control your TV (see page 63). Notes: • You can check on the recording by pressing VCR/TV again. This will switch you back to viewing through the VCR, and you'll see the program you are recording. • If you're hooked up with an audio/video cable: Switch the TV from AUX or VIDEO mode back to the TV mode, then select the channels you want to watch, as described in Step 2. Switch TV back to AUX or VIDEO to monitor your recording. • You cannot view a DSS program while recording another program. To change the channel being recorded 1 Press the PAUSE button to stop the recording temporarily. ) button or number buttons to change the channel to the one you prefer. 3 Press the PAUSE button to continue recording. Automatic IndexingYour VCR will automatically create an invisible "INDEX" mark every time you press the REC button while recording. During playback, the Index Search feature will let you move through a tape that has several recordings on it by searching for the "INDEX" mark. See Page 39, "Jump to an Index Mark with INDEX". To record a Second Audio Program (SAP) Some stations transmit a Second Audio Program - such as in a second language. If a station broadcasts in SAP, the SA indicator will display on your TV screen. You can set the VCR to record a second audio program by activating the SAP option. How to set the SAP option. 1 Press the GUIDE button. 2 Press the CH ( / 2 Press the (2) button to select the VCR SETUP operation. 3 Press the (6) button to set the SAP option to "ON". 4 Press the (5) button to set the STEREO/MONO option to "STEREO". 5 Press the GUIDE button to end the setting. 6 Follow the Step 1 through 5 on "Basic Recording Steps" on pages 42 and 43. Stereo vs. mono sound When you select the STEREO option in the initial setup operation, your VCR records in stereo any station that broadcasts stereo sounds. When a TV channel broadcasts in stereo, you'll see a stereo indicator on the TV screen. Set to MONO if the stereo signal is weak and the sound is too "noisy". Note: When you select MONO, sound is recorded as mono even when a channel broadcasts in stereo. INSTANT RECORDING TIMER Using the Instant Recording Timer (IRT) The Instant Recording Timer (REC/IRT button on the VCR) will let you make a simplified timer recording without having to use the programming timer. In order to set the IRT properly the clock must be set before starting. 1 Follow the steps 1 through 5 on "Basic recording steps" on pages 42 and 43. 2 Press the REC/IRT button twice to indicate the recording time on the display. • You may increase the recording time by 30 minutes each time you press the REC/IRT button. • While you are recording, the remaining recording time is shown on the VCR display. • At the end of your recording, the display will read "0:00", recording will stop automatically, and the VCR will turn itself off. To stop recording while in the IRT mode: 1 Press the POWER button. 2 Press the STOP button within 10 seconds. • This can be done either on the VCR or with the remote control. DELAYED RECORDING...