Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
STILL/SLOW You can freeze the picture on TV screen by pressing [PAUSE/STILL] during playback. • You can advance the picture by one frame at a time by pressing [PAUSE/STILL] during the still mode. • If the picture begins to vibrate vertically during the still mode, stabilize the picture by pressing [CHANNEL ( ) ]. • If the picture is distorted or rolling vertically, adjust the vertical hold control on your TV, if equipped. You can see the slow motion by pressing [SLOW] during playback or the still mode. • If the noise bar appears on the TV screen, you can reduce it by pressing [CHANNEL ( ) ]. • After the VCR has been in Still/Slow mode for 5 minutes, it will stop automatically to protect the tape and the video head from damage. • To return playback, press [PLAY]. AUTO REPEAT PLAYBACK This feature allows you to play a tape over and over. 1 Select main menu by pressing [MENU]. 2 Select "AUTO REPEAT" by pressing [PLAY] or [STOP]. 3 Begin auto repeat playback by pressing [F.FWD] so that [ON] appears next to "AUTO REPEAT". • If the on-screen menu still remains, press [EXIT/RESET] exit the menu. • To cancel the Auto repeat mode, press [F.FWD] at step [3] so that [OFF] appears next to "AUTO REPEAT". • When you set the Auto repeat mode to [ON] while the Counter memory mode is ON, the VCR will exit the Counter memory mode automatically. SEARCH FUNCTIONS – 4– EN INDEX SEARCH The index signal is recorded on the tape automatically when the recording is started. If you want to view a recording at a specific start point, it can easily be done. 1 Press [SEARCH MODE] so that the Index Search menu appears. 2 Enter your desired number by pressing [PLAY] or [STOP] within 30 seconds. 3 Press [F.FWD] or [REW] to start index search. If you want to go in the forward direction, press [F.FWD]. INDEX SEARCH 03 If you want to go in the reverse direction, press [REW]. • After index search, the VCR will play the tape automatically. TIME SEARCH This feature allows you to fast forward or rewind the tape for a desired length of time. 1 Press [SEARCH MODE] so that the Time Search menu appears. 2 Enter your desired time to skip by pressing [PLAY] or [STOP] within 30 seconds. 3 Press [F.FWD] or [REW] to start time search. If you want to go in the forward direction, press [F.FWD]. If you want to go in the TIME SEARCH 2 : 50 reverse direction, press [REW]. • After time search, the VCR will play the tape automatically. RECORDING FUNCTION It may be unlawful to record playback copyrighted material without the consent of the copyright owner. Accidental erasure prevention To prevent accidental recording on a recorded cassette, remove its record safety tab. To record on it later, cover Record safety tab the hole with cellophane tape. Before recording, make sure: • The desired channel is selected by pressing [Number] on the remote control or the [CHANNEL ( ) ]. (If you connected the VCR to a cable box or satellite box as in "VCR to TV connections" on page 3, select the VCR to channel 3 or 4 the same channel as the CH3 or CH4 switch on the back of the VCR. Then, select the channel you want to record at the cable box or satellite box. In this case, you can ONLY record and view the SAME channel.) • There is a tape with its safety tab into the VCR. • The desired recording speed is selected in SP(standard play) or SLP(super long play) mode by pressing [TAPE SPEED] on the VCR. Type of tape T60 T120 T160 SP mode 1hour 2hours 2-2/3hours SLPmod 3hour 6hour 8hour Tape Speed Recording/Playback Time VIEWING AND RECORDING THE SAME PROGRAM 1 Begin the recording by pressing [RECORD]. • To temporarily stop recording or resume it, press [PAUSE/STILL]. After the VCR has been in Pause mode for 5 minutes, it will stop automatically to protect the tape and the video head from damage. 2 Press [STOP] when recording is completed. TIMER RECORDING You may set the VCR to start recording while you are away.You can set seven programs to record on specific days, daily or weekly within a 1 year period. 1 Insert a tape with its safety tab into the VCR. 2 Select main menu by pressing [MENU]. 3 Select "TIMER PROGRAMMING" by pressing [PLAY] or [STOP]. Then, press [F.FWD]. • If you have not yet set the clock, "CLOCK SET" appears. If so, follow the steps [3] and [4] in "CLOCK SET UP" section. Then, set the timer recording. 4 Set the timer. Set the program number (1~7) PROGRAM NUMBER 4 DATE - - / - Program number which is not set up flashes. START TIME - - : - -- END TIME - - : - -- Select once, daily or weekly recording Set the channel number Set the end time Set the start time Set the date Press [PLAY] or [STOP] repeatedly for the desired channel number. Then, press [F.FWD]. If you connected the VCR to a cable box or satellite box as in "Connect VCR to TV" on page 3, select the VCR to channel 3 or 4 the same channel as the CH3 or CH4 switch on the back of the VCR. Then, select the channel you want to record at the cable box or satellite box. Press [PLAY] or [STOP] repeatedly for the des...