A hard surface is best for maximum accuracy. Placing the scale on a soft, deep pile rug may affect the weighing accuracy. 3. Before each weighing, tap on the lower comer of the scale. The scale will calibrate and display"—", then "0.0" and either "LB" or "KG". 4. Step on the scale and position your feet in a manner that will distribute your weight evenly over the entire scale platform. The LCD display will flash "—" several times for approximately 3 seconds before displaying your weight. Stand

Items such as clothing or towels placed or dropped on the scale may cause it to activate. In order to prevent run down of the battery, do not place anything on the scale. 1. BUTTONS 1.1 ON/OFF: for tuning-on and turning-off 1.2 ZERO: for tare function 1.3 HOLD/RELEASE: for locking in and releasing the weight 1.4 KG/LB: for changing the unit 1.5 UP: for increasing height input (0.5cm/time) 1.6 DOWN: for decreasing height input (0.5cm/time) 1.7 BMI: for height input before BMI calculation 1.8 CLEA

REMOVE THE RED TAB TO ACTIVATE BATTERY OR THE SCALE WILL NOT OPERATE. Scale Use 1 Choose pounds (LB) or kilograms (KG) using the selector switch located on the back of the scale 2 Place the scale on a flat surface A hard surface is best for maximum accuracy. Placing the scale on a soft, deep pile rug may affect the weighing accuracy. 3 Before each weighing, tap on the lower corner of the scale. The scale will calibrate and display"CRl" then "00' and either "LB" or "KG" 4 Step on the scale a

REMOVE THE RED TAB TO ACTIVATE BATTERY OR THE SCALE WILL NOT OPERATE. Scale Use 1 Choose pounds (LB) or kilograms (KG) using the selector switch located on the back of the scale 2 Place the scale on a flat surface A hard surface is best for maximum accuracy. Placing the scale on a soft, deep pile rug may affect the weighing accuracy. 3 Before each weighing, tap on the lower corner of the scale. The scale will calibrate and display"CRl" then "00' and either "LB" or "KG" 4 Step on the scale a

4. To use the BMI feature, place the patient on the scale platform; press the BMI button. The scale will prompt you to enter the patient’s height. Use the arrow (scroll) keys to find the correct height (the default height is 5 ft. 6.0 in.). Press ENTER. Display will read the patient’s BMI. Weight may remain displayed on the scale by pressing the HOLD/RELEASE button. To release, press the HOLD/RELEASE button again. NOTE: The scale will always default to the settings and units last used. * To chan

If product fails to function properly, return the product, freight prepaid and properly packed to Pelstar. See “To Get Warranty Service” below for instructions. If manufacturer determines that a defect of material or in workmanship exists, customers' sole remedy will be repair or replacement of scale at no charge. Replacement will be made with a new or remanufactured product or component. If the product is no longer available, replacement may be made with a similar product of equal or greater va