Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
The measurement pattern will be shown on the display during BFA measurement. To Clear Memory: 1. Follow steps 1-4 in To Recall Memory. 2. If the selected memory is occupied, press both (s)/(t) at the same time to clear the content of the selected Memory. General Information about Body Fat 1. Ideal body fat content is not the same for all people. Age, sex, and height are variables in this measurement. The Homedics “Body Fat Display Graph” will show your general condition. Consult your physician to determine what is most ideal for you. Recommended Body Fat Levels Age in Years 20-29 yrs. 30-39 yrs. 40-49 yrs. 50-59 yrs. 60+ yrs. Men 14% 15% 17% 18% 19% Women 20% 21% 22% 23% 24% 2. It is recommended to measure body fat or weight at the same time period daily. 3. Use this product without clothing for best accuracy. Clothes can vary in weight and affect the percentage calculation. 4. Feet must be bare and clean. For best readings they should also be slightly moist. 8. The BFA measurement finishes with 1 long beep. The fat percentage, age, and sex will be shown on the display, toggling in 1 second intervals. The unit will turn off automatically after 10 seconds. 3. If the selected memory location is occupied, it will display “ “ next to the memory number. If unoccupied, the bar will not be displayed. Press (MODE) to store the BFA setting into the desired memory location with 1. Press and hold (ON) button for 2 seconds while the power is off. It will now enter 2. In Recall mode, it will flash the memory number on LCD for 1 second. The height, age and gender of the memory number will be displayed on the screen. ' % LB 3. Press (s)/(t) to select the memory number. 4. If the selected memory number is unoccupied, no previous input will be displayed. 5. If the selected memory number is occupied, press (MODE) to confirm the desired memory settings with 1 long beep. Level of Hydration This analyzer measures your weight, the electrical impedance between your feet, and combines those readings with the information you input (Height, Age, Gender). It then automatically calculates your body fat percentage. Your level of hydration (water content) varies throughout the day and affects your impedance measurement. If you are dehydrated, there is a greater chance for fluctuation in the body fat percentage displayed by this analyzer than when you are fully hydrated. The best time for using this analyzer is in the evening. By establishing the pattern of your body’s fluctuation over a period of one month, you can determine your average level of body fat. Women will have more fluctuation in water content than men and need to monitor their reading over a longer time period to establish a personal average. You must determine this as a reference point before measuring progress in a health program. You must wait several hours before taking a body fat reading when: drinking coffee or alcohol, taking diuretic medications, or exercising. These all affect your level of hydration and the accuracy of this analyzer. Precautions 1. OVERLOAD WARNING: remove the weight immediately when the scale displays “Err2”; otherwise, permanent damage to the scale will occur. 2. The product is intended for home/consumer use only; it is not intended for professional use in hospitals or medical facilities. 3. Do not disassemble the product. Other than replacing the battery; it contains no user serviceable parts. 4. Clean after use with a slightly dampened cloth. Do not use solvents or immerse the product in water. 5. Avoid excessive impact or vibration to the unit, such as dropping the product onto the floor. Trouble Shooting 1. You must have bare feet when using body fat measurement. To get the most accurate and consistent reading, wipe your feet with a damp cloth, leaving them slightly moist before stepping on scale. 2. Display Err0 Initialization error. The user is advised to take the measurement again for an accurate result. 3. Display Err1 Wrong usage or body not stable. Repeat measurement again. 4. Display Err2 Overload Warning. Remove the weight immediately; otherwise, permanent damage to the scale will occur. 5. Display Err3 Body impedance is beyond the technical limit (100 ohm to 1 Kohm). Clean bottom of feet with a damp cloth, leave slightly moist, and repeat measurement again. 6. Display Err4 Body fat percentage is beyond the range (5% to 50%). Clean bottom of feet with a damp cloth, leave slightly moist, and repeat measurement again. 7. Display L LLo oo Replace the battery when “Lo” is displayed. 8. The condition of the skin on the bottom of your feet can affect the reading. The natural effects of aging or activity can make this skin hard. Take the reading with clean, slightly moist feet for best accuracy. Note: If you are having any problems operating this Body Fat Analyzer please call 800-466-3342, between the hours of 8:30 a.m. to 5:00 p.m. EST or by email at cservice@homedics.com Specifications • Uses BIA (Bioelectrical Impedance Analysis) to dete...
Эта инструкция также подходит к моделям:Весы - Body Fat Monitor (260.27 kb)