Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Enter the low limit in the same way the high limit was entered. After pressing the ZERO/ENTER key the scale will return to weighing with the Check-weighing function enabled. When a weight is placed on the scale the arrows will show if the weight is above or below the limits and the beeper will sound as described below. - 7 - QHW digital weighing scales user’s guide BOTH LIMITS SET The display will show OK and the beeper will sound when the weight is between the limits. LOW LIMIT SET, HIGH LIMIT is set to zero The display will show OK and the beeper will sound when the weight is less than the Low Limit. Above the Low Limit the display will show HIGH and the beeper will be off. HIGH LIMIT SET, LOW LIMIT is set to zero The display will show LOW and the beeper will be off when the weight is less than the High Limit. Above the High Limit the display will show OK and the beeper will be on. BOTH LIMITS SET. LOW IS SET GREATER THAN HIGH The beeper will never sound and the display will show LOW if the weight is less that the LOW limit, and HIGH if the weight is greater than the Low Limit. NOTE: The weight must be greater than 20 scale divisions for the check weighing to operate. To disable the Check-Weighing function enter zero into both limits by pressing the FUNC/C key when the current limits are shown then pressing the ZERO/ENTER key to store the zero values. 6.7 ACCUMULATED TOTAL The scale can be set to accumulate automatically when a weight is added to he scale or manually by pressing the PRINT key. See the PARAMETERS Section for details of selecting the method. The accumulation function is only available when weighing. It is disabled during percent weighing or parts counting. 6.8 MANUAL ACCUMULATION When the scale is set to manual accumulation the weight displayed will be stored in memory when the PRINT key is pressed and the weight is stable. The display will show "ACC 1" and then the total in memory for 2 seconds before returning to normal. If the optional RS-232 interface is installed the weight will be output to a printer or PC. Remove the weight, allowing the scale to return to zero and put a second weight on. Press PRINT, the display will show "ACC 2" and then show the new total. Continue until all weights have been added. To view the totals in memory press the PRINT key when the scale is at zero. The display will show the total number of items "ACC xx" and the total weight before returning to zero. The totals will also be printed via the RS-232 interface. To erase the memory press PRINT to view the totals and then press the FUNC/C key to clear the memory. - 8 - 6.9 AUTOMATIC ACCUMULATION When the scale has been set to Automatic Accumulation the value is stored in memory automatically. Add a weight to the scale, the beeper will sound when the scale is stable to signify the value is accepted. Remove the weight. The display will show "ACC 1" and the totals in memory when th...
Эта инструкция также подходит к моделям:Весы - QHW 15 (74.78 kb)
Весы - QHW 6 (74.78 kb)
Весы - QHW 30 (74.78 kb)