Failure to do so could cause grease deposits to build up, causing a fire hazard. 13 Maintenance and care • The hood must always be disconnected from the mains power supply before beginning any maintenance work. Opening the grid • Open the latch L and swing the grille downwards. - Fig. 6. • To remove the grid, pull it forwards from the right and • The purpose of the grease filters is to aspirate grease particles which form during cooking and it must always be used, either in the external
N LOAD L SUPPLY L LOAD N SUPPLY DP 13A, 250V BLUE (NEUTRAL) BROWN (LIVE) FUSE ON Technic Detail. Dimensions (825 D). Height x Width x Depht (in cm. 84-117 x 59,9 x 51.. Dimensions (8259 D). Height x Width x Depht (in cm. 84-117 x 89,9 x 51.. Weight (825 D). Net. 10,7 k. Gross. 16,2 k. Weight (8259 D). Net. 13,1 k. Gross. 19,6 k. Maximum absorbed power. 250. Motor absorption. 1 x 170 . Lighting. 2 x 40 . Length of the cable. 100 c. Fan powers (speed), speed in compliance with DIN 4497. Extractor
N LOAD L SUPPLY L LOAD N SUPPLY DP 13A, 250V BLUE (NEUTRAL) BROWN (LIVE) FUSE ON Electrical connection for the UKAppliances with 2 wiresThe appliance must be connected to fixed wiring with a doublepole switched fused spur outlet with or without pilot lamp. We strongly recommend the appliance to be connected only by aqualified electrician who is a member of the NICEIC who will com- ply with the IEE and any local regulations. NOTE: The terminology .DOUBLE POLE. means that both the live and theneut
If set up for recirculation, check that the charcoal filter is still effective. If set up for extraction, check that the ducting and outlets are not blocked. The cooker hood has switched off during operation... The safety cut-out device has been tripped. Turn off the hob and then wait for the device to reset. If the hood has been installed below the heights indicated in the installation instructions the motor will cut-out frequently which will damage the hood. If after all these checks, the prob
6 7 8 Fixing the shel. l Fix the four plastic supports with the four screws provided to th. height preferred. 9 Hood Operatio. . The hood is fitted with a variable speed motor. The mos. effective use of the hood is obtained by switching it on a fe. minutes before you start cooking and leaving it on fo. approximately 15 minutes after you have finished, thus ensurin. all cooking odours are eliminated. The control switches ar. located on the unit.s front panel. . the light switch switches the hood
CCESSORIES ACCESSORIES I MODELS I KLW610GEM KLWV610GEM KLW10GE21M KLWV10GE2M 640791 640792 640793 640794 FLUE CONDENSER F.HOOD-IO GN2/1 GAS OVEN 640415 640415 FLUE CONDENSER F.HOOD-6&IO 1/1 GAS OVENS 640413 640413 ZANUSSI PROFESSIONAL HHA01 2012-07-19 The Company reserves the right to alter technical specifications without prior notice.
UE CONDENSER F.HOOD-IO GN2/1 GAS OVEN 640415 640415 FLUE CONDENSER F.HOOD-6&IO 1/1 GAS OVENS 640413 640413 ZANUSSI PROFESSIONAL HHA01 2012-07-19 The Company reserves the right to alter technical specifications without prior notice.