Оценок - 4, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
The following can be ordered from your retailer: . Carbon, KF8 filter, alternatively KFL 60/80.The carbon filter is to be used when the hood is connected to the recirculation mode. Fig. 1 Using the cooker hood The control panel Best results are obtained by using a low speed for normal conditions and high speed when odours are more concentrated. The control panel has two switches; one for the lamp and one for the fan, enabling you to select one of three speeds. (Fig. 2). Turn the hood on a few minutes before you start cooking then you will get an underpressure in the kitchen. It should be left on after cooking for about 15 minutes or until all odours have disappeared. Fig. 2 Correct ventilation If the cooker hood is to work correctly there must be an underpressure in the kitchen. It is important to keep the kitchen windows closed and have a window in an adjacent room open. Important to know Not applicable for recirculation. Great care must be taken if the hood is used at the same time as a burner or fireplace (e.g. gas, diesel, coal or wood heaters, water heaters, etc.), as the hood will expel air which is required by these other appliances. Attend to it by opening a window.The negative pressure in the room must not exceed 0,04 mbar to prevent fumes being drawn back into the room by the cooker hood. 5 Maintenance and cleaning Before doing any maintenance work on the hood, disconnect it from the main supply by disconnecting the plug from the wall socket or unscrewing the fuse. Cleaning the hood Clean the outside of the hood using a damp cloth and a mild detergent. Never use corrosive, abrasive or flammable cleaning products. Cleaning the grease filters Clean the filter every month or every other month according to how much the hood is used. The cleaner the filters, the more grease they collect. Remove the filters by (Fig. 3): l Push the handle towards the rear of the hood. l Pull the filter down at the front and remove it forwards. The filter is made of aluminium wires on which the grease collects. Clean the filter in hot water using a detergent, or in a dishwasher. Let the filter dry before putting it back. Note that a dishwasher may discolour the filter. Changing and cleaning the carbon filter Only applicable for recirculation. The carbon filters absorb smells and odours. Unlike other carbon filters, the LONGLIFE KF8 carbon filter can be cleaned and reactivated. At normal use the filter should be cleaned every second month. The best way to clean the filter is in the dishwasher. Use normal detergent and choose the highest temperature (65. C). Wash the filter separately so that no food parts gets stuck on the filter and later causes bad odours. To reactivate the carbon, the filter should be dried in an oven for 10 minutes with a temperature of maximum 100. C. Fig. 3 The KFL 60/80 carbon filter can not be reactivated, it has to be changed after 6-8 months of normal use. 6 Changing the light Disconnect the cooker hood from the main supply before chan...
Эта инструкция также подходит к моделям:Вентиляторы - 8160 D (349.84 kb)
Вентиляторы - 8160 D (349.84 kb)
Вентиляторы - 8160 D (349.84 kb)
Вентиляторы - 8160 D (349.84 kb)