Оценок - 3, средний балл: 5
(
)
)
|
Фрагмент инструкции
The S1C/S1H system can be recommended for both commercial and residential use. S1C/S1H 9-24 and S1C 30-36 SIN GLE ZONE Ductless Split Condensing Unit P/N 240005841, Rev. A [05/08] Low Ambient cooling operation down to 32. F are standard on all S1H (heat pumps) factory installed (optional on S1Cs) • Low Ambient cooling operation down to 32. F – Specify this option if the S1C system will be operated in cooling mode at outside temperatures below 60. F (field installed kit) • Low Ambient controls for operation down to 0. F for S1C and S1H systems (consult factory for availability) • Hard Start • 115v (9,000-12,000 btuh only) • copper/copper coils (sea coast use) Precharged for condenser and evaporator: (Charging of field installed piping required) • Refrigeration valves – solid brass, sweat connection, easy to access ports • Up to 100’ length interconnect (including 35’ vertical lift) Duratec performance package (09-12 only) • Oversized suction accumulator with surge baffles and enhanced oil management • Factory installed solid core filter drier • Thermostatically controlled crankcase heater (heat pump) • High pressure switch (heat pump) Benefit: The Duratec performance package allows for the widest range of application in the Ductless Split industry. We fully protect the compressor for a range of outdoor ambient conditions and system applications, which extends the life of the system and virtually eliminates failures. System Options Benefit: The U-shaped coil optimizes the heat transfer surface in a smaller footprint to gain optimum system efficiency. Condenser Standard Features Product Description Benefit: These are the most efficient (power saving) and durable compressors available for the widest range of Ductless Split system applications. Fan/Motor - Fan is a large diameter, high efficiency, three or four blade propeller (depending on capacity). Motor is PSC type with internal overload protection. Cabinet • Vertically arranged side discharge • Scratch and dent resistant injection molded front access panel • Powder coated (2000 hour salt spray tested) 18 and 20 gauge aluminized steel • Recessed service valves • Easy access hose connections at 45° from valve body Compressor is hermetically sealed high efficiency rotary for 9,000-12,000 Btuh and reciprocating or scroll for 18,000-36,000 Btuh (depending on capacity). Coil is U-shaped and protected by a wire coil guard. Construction is seamless copper tubing with enhanced aluminum fins. The tubes are mechanically expanded for secure bonding to fin shoulder. Condenser Standard Features cont. Thermostatically controlled crankcase heater – This feature energizes the crankcase heater only when needed, removes the heater from the electrical circuit at conditions where it’s not required, saving unnecessary Watts, and increasing overall system efficiency. S1C/S1H SpeCiFiCAtiOnS And dimenSiOnS nOte: All EMI products are subject to ongoing development. Design and specifications may change without notice. pHyS...
Эта инструкция также подходит к моделям:Вентиляторы - Ductless Split System Single-Zone S1C 30-36 (698.49 kb)
Вентиляторы - Ductless Split System Single-Zone S1C 9-24 (698.49 kb)
Вентиляторы - Ductless Split System Single-Zone S1C 9-24 (698.49 kb)