Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
INSTALLATION The appliance may be used on any rigid horizontal surface. Do not overload the electrical circuit; avoid using the same outlet for multiple appliances. ASSEMBLING THE APPLIANCE 1. Connect the base of the appliance to the body, inserting the pegs in the seats provided (see Figure 2). 2. Turn the appliance over and fasten the base to the body using the screws provided (see Figure 3). 3. Run the power cord through the opening provided on the base (see Figure 4). TOOLS NEEDED AND ESTIMATED TIME 1 Phillips head screwdriver type PH 2 x 100 8 screws (included) Assembly time: approx. 5 minutes OPERATION AND USE 1. Connect the appliance to the power outlet. 2. The appliance emits a beep and the power indicator light (H) comes on and remains on as long as the appliance is powered. 3. The appliance goes into STAND-BY and the display shows “- - ”. 4. Press the ON/STAND-BY button (A) to turn on the appliance. It will begin to heat with the predefined settings. 5. Press the MODE button (E) to select one of the following functions available: Heating ( ) , Ventilation ( ) , Anti-freeze ( ). 5.1 Heating ( ) In this operating mode you can set the desired temperature by pressing the + and - adjustment buttons (B) and selecting one of the power levels: MIN, MAX, and AUTO using the power selector button (D) ( ). MIN power level: The appliance operates at the minimum power, reducing noise and energy consumption to the minimum. MAX power level: The appliance operates at the maximum power for rapid heating of the room. AUTO power level: The appliance automatically determines the operating power based on the ambient conditions. 5.2 Ventilation ( ) In this operating mode only the fan operates, so the appliance does not heat the room. Press the power selector button (D) ( ) to select the desired ventilation speed: MIN or MAX. 5.3 Anti-freeze ( ) In this operating mode the appliance keeps the room at a temperature of 45°F (7°C) to prevent freezing temperatures. 6. If you want the appliance to distribute the airflow over a larger area, press the oscillation button (C) ( ). The appliance will then oscillate right and left. To stop the oscillation in the desired position, just press oscillation button (C) again. 7. To turn off the appliance press button (A) and remove the plug from the outlet. 24-HOUR DIGITAL TIMER This function can be activated from any operating mode. NOTE: The display can show the temperature in both °F and °C. To select, press and hold the + key for at least 5 seconds, then release. Delayed switch-on: With the appliance STAND-BY, press the timer button (F) ( ). The display shows the symbol ( ) and the time remaining before switch-on. To set the timer, use the + and - adjustment buttons (B), then wait a few seconds for the programming to be set. The display returns to showing “--” for stand-by and the symbol ( ) to indicate you have set the timer. When the programmed time has been reached, the appliance turns on with the same settings it had during the previous operation. Delayed shut-off: With the appliance on, press the timer button (F) ( ). The display shows the symbol ( ) and the time remaining before shut-off. To set the timer, use the + and - adjustment buttons (B), then wait a few seconds for the programming to be set. The display returns to showing the current settings and the symbol ( ) to indicate you have set the timer. When the programmed time as been reached the appliance shuts off automatically. If you want to go back to operation without the timer, press the timer button (F) twice. The timer symbol ( ) disappears from the display. USING THE REMOTE CONTROL • The remote control functions correspond to those on the control panel. See the section “Operation and Use" on the previous page. for a description of the functions. INSERTING OR REPLACING THE BATTERIES • Remove the cover on the rear of the remote control; • Insert two AAA (R03/1.5V) batteries (included but packaged separately) making sure they are in the correct position (see the instructions inside the battery compartment); • Replace the cover. • Old batteries must be removed and disposed of in accordance with current legislation asthey are harmful to the environment. MAINTENANCE -Before carrying out any maintenance, always remove the plug from the power outlet. -During the season when the appliance is being used, regularly clean the air intake and outlet grilles using a vacuum cleaner. - Never use abrasive powders or solvents to clean the appliance. -Remove the back grille by pulling it outward (Fig. 1). Remove the dust filter that filters impurities from the air taken in from the room, blow it lightly, then reposition it in the appliance. WARNINGS -Never use this heating appliance in the immediate vicinity of a bathtub, shower, or swimming pool. -Use the appliance always and only in the vertical position. -Do not use the appliance to dry laundry, and do not obstruct the air intake and outlet grilles (danger of overheating). -Do not op...