Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
How to Obtain Warranty Service In the U.S.A. If you have any question regarding this warranty or would like to obtain warranty service, please call 1-800-253-2764 and a convenient service center address will be provided to you. In Canada If you have any question regarding this warranty or would like to obtain warranty service, please call 1-800-253-2764 and a convenient service center address will be provided to you. In the U.S.A., this warranty is offered by Sunbeam Products, Inc d/b/a Jarden Consumer Solutions located in Boca Raton, Florida 33431. In Canada, this warranty is offered by Sunbeam Corporation (Canada) Limited doing business as Jarden Consumer Solutions, located at 5975 Falbourne Street, Mississauga, Ontario L5R 3V8. If you have any other problem or claim in connection with this product, please write our Consumer Service Department. PLEASE DO NOT RETURN THIS PRODUCT TO ANY OF THESE ADDRESSES OR TO THE PLACE OF PURCHASE. © 2006 Sunbeam Products, Inc. d/b/a Jarden Consumer Solutions. All Rights Reserved. BTF161606EM1 Printed in China Read instructions before operating. Retain for future reference. Instruction Leaflet . . INFO-LINE If after having read this leaflet, you have any questions or comments on your fan, call 1-800-253-2764 in North America. 9100010007665 GLASS BASE TABLE fan BTF1616 8. Snap the Front Grill (N) into the Grill Ring (M). Make sure Bionaire logo is properly aligned. 9. Tighten Grill Ring Screw (O). OPERATING INSTRUCTIONS (see Fig. 1) 1. Set the fan base on a dry level surface. 2. Make sure the Speed Control is in the OFF (0) position. Speed Control (P) is located on the top of the fan motor housing. 3. Plug the cord into a suitable outlet. 4. The SPEED is adjusted by turning the Speed Control to the desired setting: 0 - Off I - Low II - Med III - High ADJUSTMENT INSTRUCTIONS Tilt adjustment Follow these instructions to tilt the fan head for upward angle air movement. • To change the tilting angle of the fan head, simply move the fan head to the desired angle. Oscillation adjustment The OSCILLATION control (Q) is located on the top of the fan motor housing. To start oscillation, push the control knob down. To stop oscillation, pull the control knob up. CLEANING/MAINTENANCE INSTRUCTIONS Follow these instructions to correctly and safely care for your fan. • Always unplug the fan before cleaning or disassembling. • Be sure to clean your fan with a soft cloth moistened with a mild soap solution. • Do not allow water to drip on or enter into the fan housing. • Do not use gasoline, thinner, or benzene as a cleaner. • Lightly run a vacuum cleaner nozzle over the fan grill to remove any dust or dirt that may have accumulated. Fan Blade Cleaning Instructions Make sure the fan is unplugged before disassembling and cleaning the fan blade. Carefully remove the front grill from the clips. Wipe the blade with a soft cloth moistened with a mild soap solution. DO NOT allow any liquid to drip into or enter the motor housing. Snap the front grill onto the fan. Make sure all parts are secured prior to operating the fan. ASSEMBLY INSTRUCTIONS (see Fig. 1 - Fig. 8) Assembly Time: 10-15 Minutes. Tools Required: Phillips Head Screw Driver. 1. Fit the motor housing assembly over the opening of the Glass Base (B) and secure with the Base Nut (C). Refer to Fig. 2. 2. Unscrew the Rear Grill Nut (D) from the Motor Housing (E). Refer to Fig. 4. 3. Position the Rear Grill (F) over the motor housing. Refer to Fig. 5 for proper alignment of the rear grill to the motor housing. 4. Secure the Rear Grill (F) to the Motor Housing (E) with the Rear Grill Nut (D). Refer to Fig. 6. 5. Remove the protective sleeve from the Motor Shaft (G). 6. Slide the Fan Blade (J) over the Motor Shaft (G). Refer to Fig. 7 for proper alignment of Fan Blade (J) to Motor Shaft (G). 7. Position the Grill Ring (M) over the Rear Grill (F) with the Grill Ring Screw (O) positioned at the bottom. Refer to Fig. 8. NOTE: You may have to loosen the Grill Ring Screw (O) in order to fit the grill ring over the Rear Grill. FAN SAFETY PLEASE READ AND SAVE THESE IMPORTANT SAFEGUARDS IMPORTANT INSTRUCTIONS When using electrical appliances, basic safety precautions should always be taken including the following: 1. Read all instructions before using this appliance. 2. Use fan only for purposes described in the instruction manual. 3. To protect against electrical shock do not immerse unit, plug or cord in water or spray with liquids and plug the appliance directly into a electrical outlet. 4. Close supervision is necessary when any appliance is used by or near children. 5. Unplug from outlet when not in use, when moving fan from one location to another, before putting on or taking off parts and before cleaning. 6. Avoid contact with moving parts. 7. Do not operate in the presence of explosive and/or flammable fumes. 8. To avoid fire hazard, NEVER place the cord under rugs or any parts near an open flame, cooking or other heating appliance. 9. Do no...