Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
e) Lower the lower flue resting it on the hood. a) Connect the air vent of the hood to the air vent f) Check if the charcoal filter (P) has been hole using a flexible hose of 15 cm diameter. installed. If not yet installed, proceed by sliding Lock the flexible hose with hose clamps (hose the 2 filter clips into their seats and turn the and clamps not provided). filter upwards. b) Make the electrical connection of the hood by means of the power cable (refer to the paragraph “Electrical connection”). c) Fit the decorative flue resting it on the hood. Lift the upper flue up to the ceiling and secure it by means of the 2 screws (L). 4) Filtering version: a) Fit the baffle (M) to the upper flue using 4 flat- headed screws (N). Connect a flexible hose of 12.5 cm diameter to the baffle locking it with a hose clamp (hose and clamp not provided). b) Take the decorative flue and rest it on the hood. Lift the upper flue up to the ceilingand secure it using the 2 screws (L). c) Lift the lower flue holding it firm with some adhesive tape and connect the flexible hose to the reducer (E) with a hose clamp (not provided). 3 Technical information GB Electrical connection ! Arrange the electrical power supply within the decorative flue dimensions. ! When making the electrical connections, check that the voltage values correspond to those indicated on the data plate inside the appliance itself. ! In case your appliance is not furnished with a non separating flexible cable and has no plug, or has not got any other device ensuring omnipolar disconnection from the electricity main, with a contact opening distance of at least 3 mm, such separating device ensuring disconnection from the main must be included in the fixed installation. ! If your unit features a power lead and plug, position this so the plug is accessible. Technical data Model HS110 Dimensions width 109.8 cm height 79 / 121 cm depth 49 cm Outlet pipe diameter 15 cm Gross weight 17.9 Kg Absorption Total 215 W Motor 1x135 W Lamps 2x40 W Flow rate 358 m3/h Grease filters Suction surface area 2673 cm2 4 Description The hood may be in the filtering or ducting version. Decide from the outset which type is to be installed. For better efficiency, we recommend installing the hood in the ducting version (if possible). Filtering version The hood aspirates air from the kitchen impregnated with fumes and smells, purifies it through the grease filters and the charcoal filter, and then circulates clean air back into the room. This version requires an air baffle (M) and a charcoal filter (P). In order to maintain constant efficiency, the charcoal filter must periodically be replaced. If the hood is not fitted with the charcoal filter, request one from the dealer. M P Ducting version The hood aspirates air from the kitchen impregnated with fumes and smells, passes it through the grease filters and then expels it to the outside through an exhaust duct. For this version the charcoal filter does not need to be used. GB 5 Operation Controls GB A B C D E A - Light button D -Third speed button Turns the lights on/off. Activates the motor at third speed B -Motor ON/OFF button E -Motor operation light Activates/deactivates the motor. The motor is activated at first speed. C -Second speed button Activates the motor at second speed 6 Maintenance ! Always switch off the electricity supply before carrying out any cleaning or servicing operations on the appliance. ! To avoid possible risks of fire always comply with the indicated instructions when cleaning grease filters and when removing grease deposits from the appliance. Careful maintenance will assure good functioning and good efficiency over time. Cleaning the hood Any fat deposits should be removed from the appliance periodically depending on amount of use (at least every 2 months). Avoid using abrasive or corrosive products. To clean painted appliances on the outside, use a cloth dipped in lukewarm water and neutral detergent. To clean steel, copper or brass appliances on the outside, it is always best to use specific products, following the instructions on the products themselves. To clean the inside of the appliance, use a cloth (or brush) dipped in denatured ethyl alcohol. Cleaning the grease filters To remove the grease filters, push the catch near the handle towards the inside and pull the filter downwards. Wash the filters by hand or in the dishwasher using a neutral detergent. If they are washed in the dishwasher, any loss of colour will not jeopardise functioning of the filters in any way. Clean the grease filters every 2 months on average depending on how heavily the hood is used. Replacing the charcoal filter If using the hood in the filtering version, the charcoal filter (P) will periodically have to be replaced. First of all, remove the metal grease filters. Push the catch towards the inside and remove the charcoal filter from its seat. Replace the charcoal filter with one of the same type by carrying out the operations in rev...