Оценок - 4, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
Accumulated deposits of grease are a fire hazard. • This appliance must not be used over cook tops powered by wood or coal or in any case, over cook tops with power levels that could damage the appliance. Never use steam or high-pressure devices for cleaning your hood (regulations regarding electrical safety). • Never use the hood without the grease filters. • The minimum distance between the open down draft and the surface above it needs to be 400 mm. • When moving the down draft, never place hands inside the operating radius of the pull-out carriage. Constantly seeking to improve our products, we reserve the right to modify their technical, functional, or aesthetic characteristics as they evolve. In the case of the version with external motor, for normal downdraft operation, it is necessary to use an extraction unit (external motor) made by the same manufacturer. The air collected must not be conveyed into a flue used for smoke or fumes from appliances powered by anything other than electricity (central heating systems, etc.). As far as concerns discharging air from the flue, respect the guidelines of the competent authorities. 14 S-DD4 GB | CONTENTS DESCRIPTION OF THE APPLIANCE............................................................................................................................................................16 INSTALLING THE HOOD........................................................................................................................................................................................17 Grease filter removal, mounting the carbon filter............................................................................................................................18 Electrial hook up of the hood..........................................................................................................................................................................19 HOW THE HOOD WORKS....................................................................................................................................................................................20 CLEANING THE HOOD............................................................................................................................................................................................22 OPERATIONAL ANOMALIES................................................................................................................................................................................23 AFTER SALES SERVICE..........................................................................................................................................................................................23 GB DESCRIPTION OF THE APPLIANC 16 S-DD4 GB | INSTALLING THE HOOD 1. Before starting the appliance installation, please check that all components are not damaged, in such a case contact your retailer and do not carry out installation. Before the installation of the Downdraft, please remove the security piece you can see in the picture (Fig. 1-2-3-4). Furthermore, please read carefully all of the following installation instructions. • Use an exhausting pipe whose maximum length does not exceed 5 meters. • Limit the no. of elbows in the piping , since each elbow reduces the aspiration efficiency of 1 linear meter. (Ex. : if you use no. 2 x 90 0 elbows, the length of piping I must not exceed 3 meters). • Avoid abrupt direction changes. • Use a 150 mm constant diameter pipe for the whole length. • Use piping approved by standards in force. The manufacturer will not be answerable for any capacity or noise problems caused by failure to comply with the above instructions and the warranty will be rendered null and void. 2. Before making the opening, check that there are no structural or other parts inside the cabinet, where the appliance is to be placed, which could hinder a proper installation. Check that the dimensions of the Downdraft and the ones of the cooktop are compatible with the cabinet so that the installation can be carried out properly. 3. Drill a 790x100 mm rectangular hole in the rear side of the cook-top for the 90 cm version and a 1090x100 mm hole for the 120 cm version. In the version with the motor already installed, remove the screws and the suctioning unit in order to insert the downdraft in the hole made. In case of the glass version, insert the downdraft in the cabinet, making sure that the stainless steel edge under the glass adheres perfectly to the cabinet surface (Fig. 5). In case of the stainless steel version, apply the counter frame in the hole made, using a fixing sealer (Fig. 6) and then insert the downdraft in the cabinet in such a way that the edge and the counter frame are superimposed (Fig. 7). 4. Fix the downdraft inside the cabinet, using the special fixing brackets supplied with the product (Fig. 8a). Insert the brackets in th...