Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
EO/9). Important! Lamination position obliquely downwards! Unless this has been done as preparation work, 2 KL 600 carbon filters (E-No. 610 899 470) (for your own account from our range of special accessories) must be inserted for return air operation! GUTEK2 5/90 GB/EU Allow me to introduce myself: I am your new AEG fume extractor hood. From now on, I should like to help you keep your kitchen free from fume and fat deposits. Not simply because of my attractive appearance, but also thanks to'my “intrinsic qualities”. I am economical in terms of energy consumption, quiet, powerful, easy to operate, and simple to care for. If you carefully read and follow my operating instructions (maintenance) before first use, you are sure to be extremely satisfied with me. Electrical connection Warning £ All appliances with a 3 core lead must bei earthed Please ensure that the voltage and current indicated on the rating plate agrees with the voltage of your electrically supply. 220/240 volts — (i.e. 220/240 V a.c.) Please note! (For users in the U.K.) If your appliance has been equipped with a mains lead with a moulded on type plug, you must comply with the following regulations: The plug moulded on to the lead incorporates a fuse. For replacements, use a 13 amp BS 1362 fuse. Only ASTA approved or certified fuses should be used. If the fuse cover/carrier is lost, a replacement cover/carrier must be obtained from electrical goods retailers. If the socket outlets in your home are not suitable for the plug fitted to the appliance, then the plug must be cut off and destroyed for safety reasons, and an appropriate plug fitted. When fitting the plug please note the following points: The wires in the mains lead are coloured in accordance with the following code: Green and Yellow Earth Blue Neutral ■ Brown ‘ Live Some appliances have a twin core mains lead, when no earth is required. As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: 1. The wire which is coloured Green and Yellow must be connected to the Earth terminal in your plug, which is marked with the letter E or by the earth symbol or coloured Green, or Green and Yellow. 2. The wire which is coloured brown must be connected to the live terminal which is marked with the letter Lor coloured red. 3. The wire which is coloured blue must be connected to the neutral terminal which is marked with the letter N or coloured black. When wiring the plug, ensure that all strands of wire are securely retained in each terminal. Do not forget to tighten the mains lead clamp on the plug. This appliance complies with the requirements laid out in the EEC Directive 76/899. Voltage 220/240 VAC Fuse rating 13 amps See rating piate for further information. Hello Voltage and current electrical connection Important Safety instructions For the user It must be ensured that hobs are always cove...
Эта инструкция также подходит к моделям:Вентиляторы - 860 D (574.54 kb)
Вентиляторы - 860 D (574.54 kb)
Вентиляторы - 8609 D (574.54 kb)
Вентиляторы - 8609 D (574.54 kb)