Оценок - 5, средний балл: 3.4
(
)
)
|
Фрагмент инструкции
Thanks to the double ring configuration, you can simmer sauces or bring water to a boil. You decide the level of heat output by a simple turn of the knob. Six Sealed Burners Versatile sealed burner configuration provides the utmost in cooking flexibility. Includes: two 18,000-450 BTU Min-2-Max™ burners, one 14,000 BTU Power Burner™, one 13,000 BTU Burner, one 9,500 BTU Precision Burner™ and one 5,000 BTU Precision Burner™. Sealed Cooktop Spill-Basin Cleanup is convenient with a black porcelain- coated area beneath the burners to catch spills. Professional-Style Controls Large professional-feel, front-mounted control knobs provide easy and accurate settings. 270 degree rotation offers superior flame control. Optional black knobs available. 36" GAS SLIDE-IN COOKTOP Configuration 6 Sealed Burners FEATURES Formed Stainless Steel Platform Yes Large Professional Skirted Knobs with Bezel 6 Min-2-Max™ Dual-Ring Sealed Burner (BTU) 2 (18,000 – 450) Sealed Power Burner™ (BTU) 1 (14,000) Sealed Burner (BTU) 1 (13,000) Sealed Precision Burner™ (BTU) 1 (9,500) 1 (5,000) Linear Flow Burner Valves 6 Electronic Ignition with Auto Re-Ignition Yes Continuous Grates 3 ACCESSORIES Griddle Included Wok Ring Included Simmer Plate Included 9" Stainless Steel Backsplash – PN# 903048-9010 Optional Black Knobs Kit – PN# 903049-9120 Optional Depth Adjustment Filler Kit* – PN# 903051-9010 Optional SPECIFICATIONS Overall Exterior Dimensions – Height 7-3/4" Width 35-7/8" Depth 25" Gas Inlet/ Power Supply Location Right Rear LP Gas Conversion Kit Included Voltage Rating 120V /60Hz /15A Connected Load (kW Rating) @120 Volts‡ 0.001 Electrical Cable Included Approved for Single Oven Combination Installation** No Approved for Downdraft Vent Combination Installation** Yes Shipping Weight (Approx.) 120 Lbs. * When replacing an existing cooktop with countertop cutout deeper than 7-1/4" and less than 8-1/2", order free Depth Adjustment Filler Kit. ‡ For use on adequately wired 120V, dedicated circuit having 2-wire service with a separate ground wire. Appliance must be grounded for safe operation. ** Not approved to be used over any Electrolux ICON® Single Wall Oven. Approved to be used in combination with an Electrolux ICON® Downdraft Vent. (Proper combination installation will require cooktop power cord to be relocated.) NOTE: Always consult local and/or national electric and gas codes. Refer to Product Installation Guide for detailed installation instructions on the web at electroluxicon.com. Specifications subject to change. electroluxicon.com Gas Slide-In Cooktop E36GC76GPS 25" 35 7/8" 2" 36" min. 13" max. cabinet depth 18" min. 30" min. for unprotected cabinet 24" min. with protected bottom surface **Applies only in case of countertop backwall 7 3/4" Side inset 5/8" Optional 9" stainless steel backsplash (attaches to wall) 3515/16"** 11/8" max. Support platform 71/2" 35 3/16"* 3515/16"* 1" countertop overhang *Both cutout dimensions are critical to proper cooktop installation. Due to variations in countertop materials it is recommended to undercut finished dimension 3515/16" and adjust upon installation of cooktop. 71/4" 3/8" 24" 1" min. recommended distance between rear edge of cutout and nearest combustible surface above countertop 2"3" 2" dia. opening to route power cable 21/2" 7" min. to nearest combustible wall (either side of unit) 4" x 4" opening to route gas supply 221/8" 351/8" 36" Gas Slide-In Cooktop Specifications • Product Weight – 115 Lbs. • Voltage Rating –120V/ 60Hz/15 Amp • Connected Load (kW Rating) @120 Volts = 0.001kW (For use on adequately wired 120V, dedicated circuit having 2-wire service with a separate ground wire. Appliance must be grounded for safe operation.) • Amps @120 Volts = 0.008 Amps • Always consult local and/or national electric and gas codes. • Cooktop ships with 3/4" factory regulator. • LP Gas conversion kit supplied. • Plan installation to have electrical connection, gas shutoff valve, and pressure regulator accessible from front of cabinet. Locate 120V grounded outlet in a 4"W x 5"H area on rear wall, 16" above floor, aligned center with cooktop. • Cabinet and/or countertop must completely enclose recessed portion of cooktop. Respect cutout dimensions and clearances and ensure that all contact surfaces are solid and level. • Overhead cabinetry should not exceed a 13" maximum depth. • Allow 30" minimum clearance between top of cooktop and bottom of unprotected wood or metal overhead cabinetry. • Absolute minimum horizontal distance between overhead cabinets installed to either side of appliance must be no less than maximum width of appliance. • Allow 24" minimum clearance when bottom of wood or metal overhead cabinet is protected by not less than 1/8" flame-retardant millboard covered with not less than No.28 MGS sheet steel, 0.015" stainless steel, 0.024" aluminum or 0.020" copper. • Allow 1" minimum clearance between rear edge of cooktop and nearest combustible surface above countertop. If required ...