Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
Therefore, we would like you to read this manual thoroughly before you start using the product and we would like you to keep it as a reference. ВЕКО <Ф>С€ CONTENTS wmf Parti Safety Warning / 3 S Part 2 Technical Aspects of your machine/4-10 c Part 3 Using your machine /11-13 Part 4 Maintenance and Cleaning /14 2 Part 1 : Safety Warning Do not ever plug the fan without finishing the assembly Before plugging the fan, make sure that the source power is the same as the declared voltage on the model sticker. a Make sure that speed setting switch is in position “0” before plugging your fan. Always palace your fan on stable surfaces, keep away from watery places like bath tub, swimming pool and shower. I Keep away from children. Do not ever use your fan with wet hands. Before moving your fan be sure that the speed setting switch is in position “O’ and it is unplugged. 3 Part 2: Technical Aspects of Your Machine D Front guard 10 □ Blade fixing nut s B Blade B Guard fixing nut 11 B Guard lock B Rear guard a Motor shaft 13 B Pin 14 B Motor DU Oscillating knob 15 ED Butterfly screw 20 m Body 16 EE] Speed setting ED Body joint screw 17 m Height adjustment tube EO Height adjustment ring EH Diagonal base tube m Plastic base cover 18 ED Bases Eil Supply cord 6 4 3 2 Voltage 230 V- Frekans 50 Hz Güç 55 W Isolation Class II Water Penetration Class Normal Note: The values indicated on the indicators of the product or on other printed documents that are provided whit the machine are obtained at laboratory surroundings accordings to related standarts. These values may change according to usage of the machine and the conditions of the environment in which the machine is used. 4 Part 2: Technical Aspects of Your Machine 3- After centering the base fixing nut, securely screw from the center. 4- Place the plastic base cover on the bases by slipping on the tube 5- Raise the height adjustment tube 5 -10 cm and fix the height adjustment ring. 6 Part 2: Technical Aspects of Your Machine £ Motor assembly to the Bases Place the height adjustment tube to the housing on the rear motor body and fix on the back. Rear Guard Assembly 1 - Take out the blade fixing nut from tpe pivot by turning clockwise. 2- Take out rear guard joint nut by turning counter clockwise 3- Place the rear guard by locating the 3 bars on the motor to the 3 holes on the guard. 4- Put the joint nut into place and fix by turning clocwise. 8 Part 2: Technical Aspects of Your Machine s Blade Assembly Place the blade by aligning with the hole and the motor shaft. The operation should be done properly. Otherwise the blade will turn in space and damage the product. Fix the blade fixing nut by turning counter clockwise according to the direction given on the nut. 9 Part 2: Technical Aspects of Your Machine £ Front Guard Assembly Place the front guard onto the rear guard make sure that they’re jointed as a whole o...
Эта инструкция также подходит к моделям:Вентиляторы - BKK 1600 P (757.57 kb)