Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Control module and top cover come in classic stainless steel only and are included with the downdraft. The cooktop downdraft unit rises from the countertop to whisk away odors and smoke into the easy-to-clean, five-layer mesh filter. The control module and top cover come in classic stainless steel only and are included with the downdraft. Wolf downdraft ventilation systems are recommended for use with Wolf electric and gas cooktops and integrated modules, excluding the unframed electric cooktops and electric grill, steamer and fryer modules. Wolf downdraft systems cannot be used with Wolf dual fuel ranges, gas ranges, sealed burner rangetops and gas rangetops. Dimensions in parentheses are in millimeters unless otherwise specified. 9/06 Planning Information Planning Information Models DD45I and DD45R Downdraft Systems FEATURES Control module and top cover are available in the classic stainless steel finish only Remote-mounted control module Internal, in-line and remote blower options Three-speed blower control Filter clean timer lets you know when the filter needs cleaning Delay-off feature automatically turns unit off, chimney remains up Stainless steel filter cover with dishwasher safe aluminum mesh filter OVERALL DIMENSIONS LED indicators 9" (229) chimney elevation Control module, top cover, mounting brackets, DIN connector and necessary hardware included with the downdraft UL listed to US and Canadian safety standards Two and five year residential warranty – exclusions apply; warranty information can be found on our website, wolfappliance.com 451/2" (1156) 411/4" (1048) 23/8" (60) 91/16" (230) 11/2" (38) DEPTH OF DOWNDRAFT CHIMNEY Dimensions may vary by ±1/8" (3). Dimensions in parentheses are in millimeters unless otherwise specified. Planning Information Planning Information Models DD45I and DD45R Downdraft Systems MODEL OPTIONS SPECIFICATIONS Downdraft with 500 CFM Internal Blower Included DD45I Downdraft Only — In-Line or Remote Blower Required DD45R Control module, top cover, mounting brackets, DIN connector and mounting hardware included with the downdraft. For Model DD45R see in-line and remote blower options below. Overall Width 451/2" (1156) Overall Height (above countertop) 91/16" (230) Overall Depth 23/8" (60) Duct Size (Model DD45I) 31/4" (83) x 10" (254) Duct Size (Model DD45R) 31/4" (83) x 14" (356) Discharge Adjustable Electrical Supply Requirements 110/120VAC, 60 Hz 15 amp dedicated circuit BLOWER OPTIONS 1100 CFM In-Line Blower 808332 900 CFM Remote Blower 801641 1200 CFM Remote Blower 801642 1500 CFM Remote Blower 804701 Refer to the Wolf Cooktop Ventilation Recommendations chart at the end of this section. ACCESSORIES Transitions in various sizes Accessories are available through your Wolf dealer. To obtain local dealer information, visit the Locator section of our website, wolfappliance.com. Power Cord 21/2' (.8 m) power cord with 3-prong grounded plug Shipping Weight 85 lbs (39 kg) Specifications are subject to change without notice. COUNTERTOP CUT-OUT 42" (1067) 21/2" MIN (64) 23/4" (70) COOKTOP CUT-OUT WIDTH 251/8" MIN (638) FLAT COUNTERTOP SPACE 191/4" (489) Dimensions in parentheses are in millimeters unless otherwise specified. Planning Information Planning Information Models DD45I and DD45R Downdraft Systems " 191/4" (489) " 251/8" MIN (638) OF FLAT COUNTERTOP* .344" 295/16" (745) COUNTERTOP TO BOTTOM OF AIR BOX " " " 5/8" (16) 13/4" MIN (45) BACK EDGE OF COOKTOP TO INSIDE OF CABINET BACK* 71/8" (181) 21/2" MIN (64) WITH NO RAISED LIP* 36" (914) 24" MIN (610) CABINET DEPTH *AREAS OF POTENTIAL INTERFERENCE LOCATION OF ELECTRICAL 24"min (610) CABINET DEPTH 451/2"min (1156) ELECTRICAL LOCATION IN CABINET BACK E31/2" (89) 4"min (102) 10" (254) OPTIONAL ELECTRICAL LOCATION IN ADJACENT RIGHT SIDE CABINET E DIMENSIONS Downdr aft Cut-Out Width Minimum Ca binet Width Downdr aft Cut-Out Depth Location of Electrical See Installation Instructions shipped with unit for detailed specifications. 42" (1067) 45 1 / 2 " (1156) 2 3 / 4 " (70) Within shaded area Dimensions in parentheses are in millimeters unless otherwise specified. 4 Planning Information Planning Information Models DD45I and DD45R Downdraft Systems INSTALLATION NOTES Refer to the illustrations and specifications for overall dimensions and installation specifics. Wolf downdraft ventilation systems are recommended for use with Wolf electric and gas cooktops and integrated modules, excluding the grill, steamer and fryer modules. The downdraft should be at least as wide as the cooking surface. IMPORTANT NOTE: Wolf downdraft ventilation systems cannot be used with Wolf dual fuel ranges, gas ranges, sealed burner rangetops and gas rangetops. A Wolf Pro ventilation hood should be used. The 45" (1143) downdraft will fit most 45" (1143) wide cabinets. Cabinet backs may need to be removed. It is recommended that oversized cabinets be used for easier installation. To incorporate a downdraft system and a Wolf cooktop, you must allow for a ...
Эта инструкция также подходит к моделям:Вентиляторы - DD45R (256.2 kb)