Оценок - 2, средний балл: 5
(
)
)
|
Фрагмент инструкции
Water may dam age the internal circuitry. • Do not let the set become hot. If temperature in the car is high or the set has been exposed to direct sunlight and is hot, lower the temperature before using it. (The liquid crystal panel will work properly within a temperature range of 41° - 104° F.) muaisiuiiiuziu • In extremely cold temperatures, the movement of the picture may be slow and the picture may be dark, but this is not a malfunction. The set will work normally once the temperature increases. • Small black and shiny dots inside the liquid crystal panel are normal for liquid crystal product DESCRIPTION The VMA7191 is a TFT active matrix color LCD monitor which delivers a striking picture and superior image resolution. The VMA7191 can be used to enjoy video images with the Clarion video sources, even if no TV tuner is connected. PACKAGE CONTENTS • 7" monitor • 5m long cable with 4 male connectors (Video 1, Video 2, Power/Ground, 3.5m IR) • Hardware (One 1/4-20 with nut and washer) BUTTON AND CONNECTOR LOCATIONS © Power Button © Video 1 Input © IR Sensor © Video 2 Input © Picture Control Button © Power Connector © Wide Mode (16:9/4:3 Format) © IR Remote Out © Source Button © Picture Select Up (Video 1/Video 2 Select) © Picture Select Down © 8 Pin DIN Pigtail WIRING PRECAUTIONS Read all wiring precautions. If you are not sure of the connections, contact your authorized Clarion dealer. 1. Disconnect the negative (-) lead of the battery before making any power connections. 2. When creating passage holes for the power wires, use grommets to eliminate any sharp edges created during drilling. This will protect the wire from being nicked and causing a short circuit. 3. When connecting the ground lead, fasten the ground lead (black) securely to a clean metal plate on the vehicle. NOTE: The VMA7191 monitor displays video images only. It does not provide audio output. Refer to the owner's manual of the connected device for information on audio output. INSTALLATION The VMA7191 is a 7" monitor with an Infrared (IR) eye. It will accept a video signal from any video source with composite video out. The IR eye will work directly with any Clarion video source product with an IR Eye Input. 1. Look over the vehicle for a location for the monitor. Each vehicle is different and locations will vary. Make sure the monitor will not interfere with the driver. 2. Once a location has been determined, connect the IR, Video RCAs and power cables to the designated sources. 3. Feed the cables through the mounting location. 4. Plug the cable into the monitor's 8 Pin Din connector. Mount the monitor with the provided hardware. màaàKäumLou MOUNTING OPTIONS Your Clarion VMA7191 monitor, has four (4) additional side threaded mounting holes, and is useable with all Clarion's mounting bracket methods. The 1/4-20 hole accommodates the ZMT009 gooseneck mount when a bottom mounting screw location is necessary. The slot on the back of the VMA7191 also accommodates dash-mount installations. In addition to this, the VMA7191 fits perfectly into all Clarion console shrouds, as well as our new headrest mounting bracket, HRM-100. PICTURE ADJUSTMENT To adjust the picture brightness, contrast, tint, color, etc., use the Picture + and -buttons located on the front panel of the VMA7191. Press the + button to increase the picture brightness, contrast, etc. Press the - button to decrease the picture brightness, contrast, etc. CARE AND MAINTENANCE Cleaning the cabinet: • Use a soft, dry cloth to gently wipe off any dirt. • Do not use benzene, thinner, car cleaner, etc., as these substances may damage the cabinet or cause the paint to peel. Cleaning the LCD panel: • Use a soft, dry cloth to gently wipe off any dust. • The surface is easily scratched; do not rub it with hard objects. SPECIFICATIONS GENERAL SPECIFICATIONS: Power Requirement: DC 12V (9-16V) Power Consumption: 0.8A Max. (0.8A or Less) Weight: 1.3lb (0.6kg) Dimensions: 7-3/8" x 5-1/8" x 1" Hole Covers 1/4-20 Threaded Insert Operation Temperature: Supplied Accessories: (188 x 130 x 36mm) (W x H x D) 41 - 104° F Extension Cable with (male connectors Video 1 Input, Video 2 Input, Power Connector, 3.5mm IR Remote Out), Mounting Hardware MONITOR SPECIFICATIONS: Display Type: Screen Size: Pixels: Color TFT Active Matrix LCD 7" wide screen 1440x234 336,960 Dots NTSC/PAL Screen Resolution: Video System: iamiüii NOTES: clarion CAR IUDI0OHETIII 661 West Redondo Beach Blvd. Gardena, CA 90247 1-800-G0-CLARI0N www.clarion-usa.com...