Оценок - 6, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
1 Controls & Features................................................. 2 Maintenance.........................................................3-6 Warranty...................................................................7 Form No. A/04/03 Part No. UMK5500-0303A ©2003 Maytag Appliances Sales Co. Litho U.S.A. USE AND CARE GUIDE Read all Instructions before Installing and operating this appliance MODELS: UXT5230AD* UXT5236AD* IMPORTANT SAFETY NOTICE WARNING Installation The installation in this manual is intended for qualified installers, service technicians or persons with similar qualified background. DO NOT attempt to install this appliance yourself. Injury could result from installing the unit due to lack of appropriate electrical and technical background. All electrical wiring must be properly installed, insulated and grounded. Overly accumulated grease in old duct work should be cleaned out or duct work should be replaced if necessary to avoid the possibility of a grease fire. Check all joints on duct work to insure proper connection and all joints should be properly taped. Operations Read all instructions in this manual before operating the appliance. Save these instructions for future reference. Always leave safety grills and filters in place. Without these components, operating blowers could catch on to hair, fingers and loose clothing. NEVER dispose cigarette ashes, ignitable substances, or any foreign objects into blowers. NEVER leave cooking unattended. When frying, oil in the pan can easily overheat and catch fire. The risk of self combustion is higher when the oil has been used several times. Cleaning The saturation of greasy residue in the blower and filters may cause increased flammability. Keep unit clean and free of grease and residue build-up at all times to prevent possible fires. Filters must be cleaned periodically and free from accumulation of cooking residue (see cleaning instructions inside). Old and worn filters must be replaced immediately. Do not operate blowers when filters are removed. Never disassemble parts to clean without proper instructions. Disassembly is recommended to be performed by qualified personnel only. Call our service cen ter for removal instructions. 1-800-688-9900 (USA), 1-800-688-2002 (Canada) The manufacturer declines all responsibility in the event of failure to observe the instructions given here for installation, maintenance and suitable use of the product. The manufacturer further declines all responsibility for injury due to negligence and the warranty of the unit automatically expires due to improper maintenance. * Please check for latest specification revisions before any custom work or cutouts. CONTROLS & FEATURES 2 CONTROLS & FEATURES Lights On/OffSpeed Selection 21 1 2 Speed Selection This switch controls the speed of the blower. The first position is low speed, the second is medium speed, and the third is high speed. Lights On/Off Turn lights on or off by moving this switch. MAINTENANCE CLEANING 3 Surface Maintenance: Clean periodically with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive detergent, or steel wool/scouring pads which will scratch and damage surface. For heavier soil use a liquid degreasing cleaner. After cleaning, you may use non-abrasive stainless steel polish/ cleaners, to polish and buff out the stainless luster and grain. Always scrub lightly, with clean cotton cloth, and with the grain. Do not use any product containing chlorine bleach. Do not use “orange” cleaners. MAINTENANCE CLEANING 4 Residue Cup: Residue and grease from cooking will collect in the residue cup located inside the range hood, behind the perforated diffuser panels. Periodically, clean out residue in cup. Clean by hand or in a dishwasher. Spray degreasing detergent and leave to soak if heavily soiled. Dry residue cup and re-install before using hood. plastic residue cup CLEANING AND MAINTENANCE SELF CLEAN FEATURE 5 Using Self Cleaning: WARNING: Use only non-corrosive & non-abrasive grease cutting detergents. DO NOT USE OVEN CLEANERS. Models UXT5230AD* & UXT5236AD* hoods are designed with a self cleaning feature. The centrifugal blower system automatically liquefies cooking residue accumulated in its internal housing, and deposits the residue in the cleaning cup. Nevertheless, grease from cooking can also dry and adhere in the internal housing. Running the self clean function periodically will flush out accumulated residue in the range hood’s internal housing. Cleaning Frequency: Cleaning should be completed approximately once a month under normal use. Detergent: Non-corrosive, non-abrasive grease cutting spray detergents are recommended. Self Clean: Turn blower on lowest speed for cleaning. With nozzle on ‘spray’, squirt the grease cutting detergent through the safety grill,directly onto blower blades 10-15 times. Allow self cleaning to complete for 5 minutes, turn blower off. Remove cleaning cup. Clean w/ mild detergent or in dishwasher ...
Эта инструкция также подходит к моделям:Вентиляторы - UXT5236AD (1.1 mb)