Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
This warning symbol indicates the presence of possibly dangerous chemicals. Proper precautions should be taken when handling corrosive or caustic materials. This warning symbol indicates the presence of hot surfaces that could cause serious burns. Stainless steel and steam lines can become extremely hot and should not be touched. This warning symbol indicates the presence of possibly dangerous pinch-points. Moving mechanical parts can crush and/or sever body parts. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F232182 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Safety F232182 5 Figure 1 Safety decals appear at crucial locations on the machine. Failure to maintain legible safety decals could result in injury to the operator or service technician. To provide personal safety and keep the machine in proper working order, follow all maintenance and safety procedures presented in this manual. If questions regarding safety arise, contact the factory immediately. Use factory-authorized spare parts to avoid safety hazards. PHM2008P ® WARNING MACHINE MAY BE HOT AND CAUSE BURNS ATTEMPT NO ENTRY UNTIL BASKET HAS STOPPED DO NOT WASH ITEMS CONTAINING HAZARDOUS CHEMICALS, FLAMMABLE FUMES OR FLAMMABLE MATERIALS. USE MACHINE WITH WATER ONLY. SERIOUS INJURY MAY RESULT. DO NOT LET CHILDREN OPERATE OR PLAY WITH OR AROUND WASHER. WARNING MACHINE MAY BE HOT AND CAUSE BURNS ATTEMPT NO ENTRY UNTIL BASKET HAS STOPPED SERIOUS INJURY MAY RESULT WARNING MACHINE MAY BE HOT AND CAUSE BURNS ATTEMPT NO ENTRY UNTIL BASKET HAS STOPPED SERIOUS INJURY MAY RESULT Before Power is Connected To unlock door to remove contents of basket, retract the door locking plunger with a knife blade or other thin object while at the same time applying some pressure to the door latch handle in a clockwise direction. DO NOT PUSH External Supply Signals THIS MACHINE MUST BE PROTECTED BY A CIRCUIT BREAKER DO NOT USE FUSES WARNING Avoid contact with external steam pipes. Serious injury may result. WARNING ! HIGH VOLTAGE INSIDE DISCONNECT MAIN POWER BEFORE REMOVING COVER. ONLY SPECIALLY TRAINED PERSONNEL SHOULD TURN POWER ON WHEN COVER IS REMOVED. HAZARDOUS CHEMICALS MAY BE PRESENT. HOT WATER IS USED TO FLUSH COMPARTMENTS. WEAR HAND AND EYE PROTECTION WHEN ADDING DETERGENTS/CHEMICALS. AVOID OPENING DISPENSER LID WHILE COMPARTMENTS ARE BEING FLUSHED. REFER TO MANUALS. Presence de products chimiques dangereux possible. De l. eau chaude est utillsae pour la vidange des compartiments. Toujours porter des gants et des lunettes de protection lors de l. ajout de detergents/produits chimiques. Evites d. ouvrie la couvarcIe du distributeur lors de la vidange des compartiments. Se reporter aux instructions des guides de l.utillsatsur. CAUTION ATTENTION Cold Water 0231368-00 2-5.7 BAR, 30-85 PSI Hot Water 0231367-00 2-5.7 BAR, 30-85 PSI, MAX 90°C, 180°F Safety Operator Safety WARNING NEVER insert hands or objects into basket until it has completely stopped. Doing so could result in serious injury. SW012 To ensure the safety of machine operators, the following maintenance checks must be performed daily: 1. Prior to operating the machine, verify that all warning signs are present and legible. Missing or illegible signs must be replaced immediately. Make certain that spares are available. 2. Check door interlock before starting operation of the machine: a. Attempt to start the machine with the door open. The machine should not start with the door open. b. Close the door without locking it and attempt to start the machine. The machine should not start with the door unlocked. c. Close and lock the door and start a cycle. Attempt to open the door while the cycle is in progress. The door should not open. If the door lock and interlock are not functioning properly, call a service technician. 3. Do not attempt to operate the machine if any of the following conditions are present: a. The door does not remain securely locked during the entire cycle. b. Excessively high water level is evident. c. Machine is not connected to a properly grounded circuit. Do not bypass any safety devices in the machine. WARNING Never operate the machine with a bypassed or disconnected balance system. Operating the machine with severe out-of-balance loads could result in personal injury and serious equipment damage. SW039 Safe Operating Environment Safe operation requires an appropriate operating environment for both the operator and the machine. If questions regarding safety arise, contact the factory immediately. Environmental Conditions . Ambient Temperature. Water in the machine will freeze at temperatures of 32°F (0°C) or below. Temperatures above 120°F (50°C) will result in more frequent motor overheating and, in some cases, malfunction or premature damage to solid state devices that are used in some models. Special cooling devices may be necessary. Water pressure switches are affected by increases and decreases in temperature. Every 25°F (10°C) change in t...